This dishwasher door gasket (Bottom Gasket, Gasket, Door Seal, Dishwasher Door Lower Seal) helps prevent water from leaking out of the bottom edge of your dishwasher door by creating a watertight seal. This part is attached to the bottom of your dishwasher inner door panel. It is frequently exposed to water and detergent during its lifetime. The water and chemicals can eventually wear down the gasket and compromise the integrity of the seal. If the gasket is malfunctioning, the integrity of the door seal will be effected. You will notice leaking through the bottom of your dishwasher door. If your dishwasher is leaking water from the bottom of the door, first inspect the seal for food particles near the bottom and sides, and remove the buildup, as it can stop the door from closing properly and keeping a tight seal; if not, you may need to replace the bottom door gasket. Check the door gasket for tears, cuts, or wear. This part is sold individually and measures 22.5 inches by 1.25 inches. It is constructed of plastic, and comes in yellow/grey. Includes one lower door gasket.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeffrey T - March 14, 2024
Verified Purchase
Worked as expected
Part was in great condition. Came in on time and as expected.
★★★★★
★★★★★
Sam K - December 31, 2023
Verified Purchase
Prompt delivery. Correct part.
Took two or three cycles for gasket to "seal", but now working correctly.
★★★★★
★★★★★
Stephanie F - October 18, 2023
Verified Purchase
Fixed the leak
Our dishwasher started dripping a lot of water during wash cycle between the door and the unit. I was hoping we didn’t have to replace the whole thing. This did the trick! Super easy to install.
★★★★★
★★★★★
Karin M - July 12, 2023
Verified Purchase
Great service
I am an old lady living alone on a fixed income. When my dishwasher door lost its seal, I thought maybe I could fix it myself and save a big service call. Worked like a charm! I saw the serial number, looked on line, found you and ordered. It came within a few days and I popped it in place. Not bad for 82 years young! Thanks for making it easy!
★★★★★
★★★★★
Dennis M - June 21, 2023
Verified Purchase
Saved Money
Saved me $200 minimum service charge from appliance repair man
★★★★★
★★★★★
Roya M - April 20, 2023
Verified Purchase
Easy repair
Part in great shape came on time
★★★★★
★★★★★
Martin S - April 8, 2023
Verified Purchase
Easy repair
The part was easy to install and replacement stopped the dishwasher from leaking
★★★★★
★★★★★
Sandra R - March 20, 2023
Verified Purchase
Easy Repair!
Part came in perfect condition!
Best part was the installation video!!
Will use this company when necessary! Very satisfied!
★★★★★
★★★★★
Stephen P - January 13, 2023
Verified Purchase
Easy repair
The part fit and worked well
★★★★★
★★★★★
DEL B. W - January 13, 2023
Verified Purchase
Dishwasher Door and Tub Seal
Parts arrived in sealed undamaged packaging. Parts were correct quality replacements. Thanks.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 85 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water leaking from dishwasher Iwatche
I watched the partselectrepair videos for tub gasket, bottom gasket, and splash shield. The instructions were very clear and easy to follow, thank you so much now I have a dishwasher that's good as new.
For both parts replaced, I simply followed the instructions from your on-line videos. These videos are a great help to make sure that you are installing the part the correct way. Saved us several hundred dollars vs. calling a repairman. Thanks
The old Gasket came right off but it was a little tricky to put the new one on even tho I watch the video. I got the new one in place but it is still leaking going back to the drawing board
Chuck from UNION, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water coming out around the middle of the bottom of the door
I followed directions from a video on this site and written directions in order to make the repairs. Pulled out the old gasket from one end with pliers . I cleaned out the slot in the door of any food or dirt and replaced with the new gasket. It was a very easy and quick repair that allowed me to use my dishwasher quickly. Thanks for the
... Read more help.
Read less
corey from TROY, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our Frigidaire dishwasher leaked from the lower left side.
I watched several videos of people replacing this gasket easily, but we had trouble. The old one came out easily. The new one just slipped into the crack, but it kept going and ended up on the inside of the door. We ended up taking the outside panel off to get the gasket out. We tried to fit the thing into the slot, but it kept coming
... Read more out the other side. I finally came across someone who had had the same trouble. By feel only, you can feel a slight ridge on the top side of the lower door and I had to press the gasket against that ridge. It was not a very noticeable ridge, but it holds the back (slot edge) against the door so that the gasket stays put. When we figured that out, the repair went smoothly. I am running the dishwasher now and so far, so good.
Read less
Janet from TUMBLING SHLS, AR
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bottom door gasket was loose and leakage was occurring from the door
Followed the YouTube instructions. Loosened 4 screws took off the front door panel and removed the old door and installed the new one. The video was very helpful!
William from PALM SPRINGS, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Missing tub gasket
I think the videos on the site are awesome. Made both repairs after watching them. They explain the repairs in a simple to follow way.
1-2-3. Finished ! I had watched your video on how to !
Dante from SOUTHOLD, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
63 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Helena
July 20, 2017
So I’m trying to do this repair myself and although I think I got it right I’m not sure and it’s very frustrating. Here’s the problem, after I change the gasket seal just barely touching it will slip it out. How do I stop this from happening, do I have the wrong part or was I supposed to get some sort of glue or clip thing? The notch is on the right side that was indicated in the video too. Can you help me?
Hi Helena, based on your situation we recommend pressing the gasket with controlled pressure into the channel that is on the inner door liner. It should be a snug fit, and if it is too loose it needs to be pushed in further. I hope this helps.
60 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
December 23, 2017
Bottom door gasket, pulled out the old one, very easy, cleaned the space where gasket goes. Started on the side with notch, pushed in then started pushing in from notch across, gasket then disappeared and i can not see it. How do i recover the gasket?
For model number gld2250rdb0
Hello Robert, Thank you for your inquiry. You may have to remove the inner door panel or liner in order to pull the gasket out. We also have an installation video to install the gasket. https://www.partselect.com/PS9495545-Frigidaire-809006501-Bottom-Door-Gasket.htm#RepairVideo
Hope this helps!
37 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
October 4, 2017
I sent a question yesterday about a notch in the bottom of the door seal i ordered. You told me about the notch on the end. I know what that is. I am asking about a notch that is in the middle of the gasket. I have got this part before and had the same thing. It does not show on your picture of the item or on the installation video. It is about 1/4 inch square. What is it and will it let the door leak. Don't see a reason for it.
For model number FFBD2409LW0B
Hi Gary,
Thank you for your question. That is just how the part is made. You do not have to worry about it. Your appliance should not leak because of that notch. Good luck with your repair.
19 people found this helpful.
Was this helpful?
Thank you for voting!
Cece
July 20, 2017
My dishwasher is leaking from the lower left corner of the door. Where do I start?
Hello Cece, we recommend checking your lower door seal 809006501 for damage. The door seal is the most common reason for leaking, and it is a replacement part that experiences a lot of wear. Best of luck with this repair.
16 people found this helpful.
Was this helpful?
Thank you for voting!
Leslie
August 3, 2017
I'm looking for the bottom door gasket. Your video shows installing a white gasket on what appears to be a somewhat flexible interior. I'm wondering if that gasket will work on our Frigidaire professional series dishwasher. Or do i need a different bottom door gasket.
For model number PLD4460REC
Hello Leslie, thank you for contacting us. The correct bottom door seal for your model is PS1150945. Good luck with your repair!
10 people found this helpful.
Was this helpful?
Thank you for voting!
David
September 13, 2017
Bottom door gasket has 6 holes and water leaks through the holes. Was sent a replacement from Frigidaire and it has the same holes. I found the gasket on your site and the picture doesn't show any holes but i wanted to know before i order it if the picture is accurate
For model number FFBD2406nb9b
Hi David,
Thank you for your inquiry. I found your model number on one of resource sites and the image of the gasket shows that it does have 6 holes. The manufacturers part number I found under your model number is different from the one you have referenced in your question to us. The part number I have found is 5304500204 (our part number for it is PS11703834). Frigidaire may have provided you with the wrong part. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
October 3, 2017
I have twice purchased bottom seal for door and both times they have come with a notch in the middle. This isn't shown in any video on replacement of gasket. Why is this?
For model number ffbd2409lw0b
Hi Gary,
Thank you for your question. There is a little tab on the bottom edge of your door that that notch slides over to give you your water tight seal. Good luck with your repair.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Leslie
August 3, 2017
The door gasket i need to replace is black and rubber, and on a "professional series" Frigidaire dishwasher. Will the white gasket you offer work?
For model number PLD3465REC0
Hi Leslie,
Thank you for the question. The Door Gasket for the model number PLD3465REC0 is part number PS8260227.
Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Miles
July 20, 2017
I’m getting a leaking from my dishwasher but I already replaced the seals. What should my next plan of action be
Hello Miles, we recommend first checking that the dishwasher is levelled and properly secured. Then check that the door aligns with the tub opening, and that the splash guard does not have any damage. If everything is in good condition, check the float for sticking, and the spray arm for splitting. One of these should solve your problem. However, if you are still having leakage, please let us know and we will help you solve it.
7 people found this helpful.
Was this helpful?
Thank you for voting!
David
November 29, 2017
Every time i install the gasket, it pops out when the door is opened. What am i missing?
For model number FGHD2433KW1
Hi David,
Thank you for your question. Here is an installation video for your appliance: https://youtu.be/7NfdyJp1zKA . I hope that helps. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
