We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
January 12, 2018
Front door dryer: I dropped small brush of vacuum while trying to vacuum messy sand that was below the lint trap toward bottom. While trying to fetch it with various items, it was probably pushed toward back of dryer. I ran out and purchased a dryer brush, but no luck. Can you tell me what i have to remove to get under to find this plastic brush about 2.5" x 1/2"
For model number GE front door dryer-DPSR4
Hello Chris, Thank you for your inquiry. I would try removing the front panel in order to access the inside of the front of the dryer. Although we do not have a video for this exact part, I have included a few links to videos for other parts that show you how to remove the front panel in order to access them. Hope this helps!
https://www.youtube.com/watch?v=4pv0iMrD8RA
https://www.youtube.com/watch?v=n7YSHnTLHMc
1 person found this helpful.
Was this helpful?
Thank you for voting!
Evevone
February 9, 2020
A worker stepped on top of dryer and put a big dent in top. Dryer makes noise when turned on. If i replace the top, do you think that will fix it? I think the drum is hitting the dented in top.
For model number GTDX180ED4WW
Hello Evevone, thank you for your question. Yes, if the noise started after the dent was put in it the top should be replaced and the noise should stop. It does sound like the drum is hitting the top Part #: PS9494516. I hope this helps.
