Replacing your General Electric Dryer Heating Element & Housing Assembly
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE11X20397 replaces these:
AP5809968, WE11M30
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
5 Stars
3
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John H - October 22, 2022
Verified Purchase
Easy Peasy
I don't know why such a new machine had the element burn out, but repair was simple enough.
★★★★★
★★★★★
George R - December 5, 2020
Verified Purchase
Easy to replace, an extra hand came in handy when putting in place and the placement of mounting screws
It came faster then expected, which was great news. Thank You for the fast service!
★★★★★
★★★★★
Alaaeldin S - April 24, 2018
Verified Purchase
Best Demonstration Video
The demonstration video was great and the parts detail you will never find anywhere else.
★★★★★
★★★★★
Walter M - March 21, 2018
Verified Purchase
Easy transaction
Quick shipment, packed well. I'm back in business with my dryer. Thank you
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
March 31, 2018
My dryer is not heating. It shows it could be a few different parts such as cycling thermostat, heating element, and a few others. It says i can test these parts with a multi-meter but i cannot find what the readings should be on the parts. If i knew then i could test them. Thank you.
For model number GTX18ESSJ0WW
Hello Paul, Thank you for your inquiry. The readings on the thermostats and thermal fuse should be close to 0 ohms. The reading on a dryer heating element should be between 5-50 ohms of resistance. We have included links to our articles on how to test the thermostats and heating element. Hope this helps!
https://www.partselect.com/Dryer+test-thermostat+repair.htm
https://www.partselect.com/Dryer+test-heating-element+repair.htm
11 people found this helpful.
Was this helpful?
Thank you for voting!
Becki
December 7, 2019
My dryer has all of a sudden started to require being run twice (at more than 60 min each time) to dry a load of clothes.I am assuming this is a heating element issue. How do i know for sure this is the problem before i start going and buying parts to repair the dryer?
For model number GTDP400EM1WS
Hello Becki and thanks for writing.
It sounds like a faulty thermostat PS267926 check and replace if needed. We hope this helps. Please contact us anytime.
If that fails you will have to consider the heating element.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Harry
December 22, 2017
I noticed that the top of the dryer gets hot only on the left side. The whole top of the dryer used to get hot.
For model number GTDX200EM0WW
Hello, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: cycling thermostat, the high limit thermostat, safety thermostat, and heating element. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
August 15, 2022
Dryer doesn't heat properly the heating element only has the outside coil getting hot the middle and inside are not working on any setting and if I change setting to low then back to medium or high I have no heat till I turn the dryer off then on
For model number GTMP520ED3WW
Hello Jim, Thank you for your inquiry. You can test the heating element with a multimeter to see if it has continuity, and we would also recommend checking the inlet control thermostat, the high limit thermostat, the safety thermostat, and the wiring connections. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I need to replace a thermostat that is attached to heathouser. I've got the old thermostat
Off but there is not enough room to get screw in with my fingers. If i take the heathouser
Off will this work? If so , how do i get the heathouse off?
For model number GTDN500EM2WS
Hello Gary and thanks for writing.
We have attached the link to our repair video. We hope this helps. Please contact us anytime.
https://www.youtube.com/watch?v=4pv0iMrD8RA
Was this helpful?
Thank you for voting!
Debbie
July 31, 2021
We need to replace heating element for above model no. Will this item work?
For model number GTDP200EF4WS
Hi Debbie,
Thank you for your question. Yes, this would be the correct heating element for your dryer. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
