Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chad G B - July 24, 2018
Verified Purchase
Problems solved!
Full basket and diaphragm set going to be used on an antique inherited Weed Eater blower that I really want to keep for sentimental reasons. Perfect
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
November 14, 2023
ght 22 hedge trimmer primer bulb does not prime, got unit from neighbor to fix. switched lines and same problem. starting fluid unit does turn over. pulled carb apart everything looks clean. any ideas why primer does not prime?
For model number ght 22 weed eater
Hi Lawrence,
Thank you for your question. If the primer bulb will not prime and you have already replaced the lines and took the carburetor apart, check the seals around the tank for signs of damage or wear and make sure that the gas vent is open. Also make sure that the fuel in the tank has not been in there for more than 90 days. If these are fine, we would recommend replacing the carburetor. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
