This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Trimmer, Tiller.
This part works with the following products:
MTD, Cub Cadet, Troy-Bilt, Ryobi.
Part# 753-05860 replaces these:
753-05860
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Garrie J - August 20, 2018
Verified Purchase
The part was good just what I needed
The repair was easy my machine is back on the job
★★★★★
★★★★★
Slavens C - May 2, 2018
Verified Purchase
Fit great.
Up and running
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Erik
April 28, 2018
How do you remove the clutch assembly? Is there a set screw holding it on the shaft or do you pry it off?
For model number BL410
Hello Erik, thank you for your question. There is a clutch drum screw holding the clutch drum onto the motor. This is the only tricky part involved in removing the clutch. To remove the clutch, a screw must be removed from the hole in the clutch drum that connects the drum to the motor. To remove the clutch drum screw, the trimmer's piston must be bound first. Otherwise, turning the drum screw will only rotate the piston, and the screw will not come out. To bind up the piston, you may have to remove the spark plug to access the piston. Stuff a short piece of nylon rope into the cylinder, leaving some hanging out so it can be easily removed. Slowly pull the starter cord to bring the piston up. When you feel resistance in the starter cord, you'll know the piston is bound enough to remove the clutch drum screw. Clutch drum screws are regular thread, and turn counterclockwise to loosen. I hope this information helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
January 4, 2019
I am trying to rewind the starter rope and I am having trouble disassembling the machine. I have removed the clutch drum housing but the clutch drum just spins and the doesn't seem to be a way to remove it. Any help would be appreciated.
Hello Bob, Thank you for the question. Here is a repair store I located from a previous customer. Removed the spark plug, then inserted a length of rope into the cylinder with a few inches remaining outside of the cylinder. This is to stop the engine from rotating when removing the drum and clutch. Then remove the clutch cover. Insert a torx driver into the clutch drum and remove it. The use a screwdriver and hammer to hit the edge of the clutch to loosen it from the shaft. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jay
January 10, 2020
What screw driver type is needed to remove the screw on the clutch assembly that holds it onto the engine shaft?
For model number TB22EC
Good Day Jay. Thank you for your question in regards to your unit (TB22EC). Based on our research, it appears you will need an Allan Head Screw Driver. We hope this helps. Best Regards.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
June 25, 2019
Trying to get two new springs for the clutch
For model number 41BDC20C912
Hello Greg, Thank you for the question. The springs are only sold as part of the Clutch, PartSelect Number PS9303676. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
_WW_2.gif "Part Location Diagram of 753-05860 MTD Clutch Assembly, Small")
_WW_2.gif "Part Location Diagram of 753-05860 MTD Clutch Assembly, Small")
