This upper drive shaft adapter, also known as a shaft socket, is a plastic component that connects the driveshaft assembly to other parts of your power tool, like the cutting head. It is usually located at the top end of the driveshaft, near the working end of the tool. Its purpose is to transfer power from the engine to enable cutting. If the adapter is broken, you may experience shaking, power loss, or strange noises. If you see visible cracks or damage, it needs to be replaced. To remove the existing adapter, use pliers to pull out the cone-shaped piece, and detach the internal adapter by screwing an 8mm hex bolt into it and then pulling it out. This OEM-sourced adapter set is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Pole Saw.
This part works with the following products:
Echo.
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Upper driveshaft adapter replacement
1. Pull out cone shaped adapter piece (tap out or use pliers). 2. Pull out internal adapter from inside shaft by screwing in an 8MM hex bolt. Once bolt is firmly screwed in, pull or tap out. 3. Install new internal adapter into shaft. Ensure the machined end of the adapter is inserted first. Machined end will have smoother internal
... Read moregrooves when viewing from the end. 4. Install/tap on cone shaped adapter until it bottoms.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
August 7, 2018
Chain barley spins
For model number Ppt-230
Hi Dan, Thank you for your question. There are a few things that you will want to check. Open up your tool and make sure the chain as not slipped off. You may also have to inspect your tool to see if the sprocket underneath the bar cover is stripped or if your clutch is worn down. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
_WW_2.gif "Part Location Diagram of 61029822360 Echo Upper Drv Shft Adpt-2Pcs")
_WW_2.gif "Part Location Diagram of 61029822360 Echo Upper Drv Shft Adpt-2Pcs")
