Seal-oil .750x1.375x.250 05618900

This Oil Seal comes individually sold, and is rated as "Hard" to install. It is used to seal the gearcase and allow the axle to pass the gearcase housing. You will need a screwdriver, socket set, wrench set, nutdriver, roll pin punch, seal puller and ger puller to properly install and use this part (Tip: tap the seal into place). It attaches on the gear case around the axle shaft. If worn or damaged the part may leak oil, and this is a sign the part is broken and must be replaced. The seal is metal, and comes in black/brown. Refer to your make, mode and diagram to ensure this is the correct part.