Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Finn R - May 22, 2020
Verified Purchase
Successful replacement
the right part, fairly quickly delivered, with good instructions... the mouse eaten part was quickly removed and the new was easily bolted up. Mower in great running order now!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James Goss
July 25, 2017
Does the fit a 10hp motor?
For model number 204412-0163-E1
Hello James, that is a great question. The armature magneto 591459 A.K.A. ignition coil will work for this model 204412-0163-E1 Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
January 18, 2018
Motor backfires. Just started doing this, has always run perfectly until this started. Is this the ignition coil going bad?
For model number 20M114-0671-E1
Hi James,
Thank you for your question. If the engine is backfiring, it could be caused by a number of issues. Here is a link you may reference to see what could be causing problem, https://www.briggsandstratton.com/eu/en_gb/support/faqs/browse/engine-backfire-afterfire.html. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
October 25, 2019
This is a twin cylinder engine. If i pull one plug wire the engine dies. I replaced the "dead" side coil, and it still does the same thing. Bad coil?
For model number 303447-0447-01
Hi Mike, thank you for your question. If you have changed out your coils and the problem still persists, the problem might actually be with your ignition module itself. I hope that helps. Good luck with your repair.
Hello, I have a Bearcat chipper with a 8HP Briggs and Stratton, model number above. It has set over winter and full of gas but wouldn't start. I tried using the quick start spray and it would start and immediately die. Any suggestions? Thank you Ron
For model number 201432-0036-E1
Hello Ron, Thank you for the question. We suggest removing and cleaning the Carburetor and replace the Gaskets of needed. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
