Also known as the door boot seal. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Washer Bellow with Clamp
Average Repair Rating: 2.5 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Front Door on Washer leaking
I bought this as much for the instructions as for the part...as I wasn't sure how to get a spring back around the bellows. The instructions were good, however I found that the spring went on best when I had two sets of hands - one set holding the spring in place (with a metal tool to make sure it didn't slip - as the rubber spacer didn't
... Read more do the job) , and the other hand guiding the spring around the rest of the bellow. Also, when putting the metal clamp back around the water inlet area, I didn't have 3/8" soft copper tube on hand, so I used a couple of other tools to get the metal pieces to wrap around eachother. Also, leaning the washer back on the wall helped make room for my hands to get into the machine and do the work.
Read less
Jason from Austin, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
59 of 82 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rubber boot on our front loading washing mashine was torn and needed replacing to stop the leaking water.
The instructions were good, but putting the spring on was quite difficult. The 3 spacers that came with the boot didn't want to stay in place. Finally I got 2 c clamps, putting a clamp over the spring and rubber spacer, and that did the trick. without the c clamps it would have been extremely difficult to get that spring on. Now it's fixe
... Read mored and no more leaks.
Read less
Durr from Mulino, OR
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
73 of 113 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joseph
June 27, 2019
My model has the bellows that is glued in place. Is that the only difference? And what kind of glue do i use?Thanks
joseph
For model number 411.40042990
Hello Joseph, thank you for your question. If the old bellow was glued on the new bellow can be used with the clamps and retainers and does not have to be glued on. The new bellow comes with a spring clamp that will hold the bellow in place. Please see our installation video online for help with this repair! I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Lindsay
December 30, 2019
Would this be compatible with Kenmore washer model 970 c47062 00. According to the parts list i need part #134177600. Thank you!
For model number 970-c47062-00
Hi Lindsay, this part is fully compatible with your model. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Shara
April 16, 2018
Hi. I bought a bellow but it didn’t come with a clamp. Can I buy one separately?
For model number GLTF1670AS0
Hello Shara, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS417377. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Leo Fritschen
March 1, 2018
How do you replace the front door seal or bellows on then Frigidaire stackable washer?
For model number FAFW3801LW
Hi Leo,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install it. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gina
March 19, 2023
The Kenmore boot was glued on. Boot doesn’t appear to need replacing. What type of glue would I need to re-glue or outer clamp to keep it from moving? Much appreciate!
For model number 417.42042100
Hello Gina, thank you for your question. The glue is no longer used. When replacing the bellow, the new one comes with a clamp PS900237. We also have a video for your view for installation information. We hope to hear from you soon.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Candace
September 12, 2022
Will this this fit Electrolux model LTF530FS0? Does it include everything needed?
For model number LTF530FS0
Hello Candace, thank you for your question. The Bellow with Clamp, part number PS900237, will fit your model. If you have any follow-up queries please feel free to reach out to customer service, we are available seven days a week. Glad to be of help!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Washer-Seals-and-Gaskets.htm"},{"position":3,"name":"5303937187","title":"5303937187","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
