Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Harry H - October 23, 2023
Verified Purchase
Easy fix
Part was exactly as described. Easy repair.
★★★★★
★★★★★
Brian S - October 22, 2023
Verified Purchase
Easy repair
My refrigerator water and ice dispenser is back up and running. The only difficult part in the repair was connecting the inlet hose to the water filter which is mounted underneath the fridge. There was no way to remove the water filter housing from the front, so I had to reach in to connect the water inlet hose to the water filter housing. To do this, I had to temporarily remove the solenoid assembly.
★★★★★
★★★★★
Robert S - November 14, 2022
Verified Purchase
Water line replacement
The video showing how to replace the water line was great. It helped me verify that the part was made for my refrigerator. The installation went well and was successful. I have water and ice at the door again and no leaks!
★★★★★
★★★★★
Byron B - February 14, 2022
Verified Purchase
After watching your video it was easy
Water line
★★★★★
★★★★★
Martha J - September 1, 2021
Verified Purchase
Easy installation
Works great now
★★★★★
★★★★★
Donald C - May 14, 2020
Verified Purchase
Great review for finally fixed filter line
Very easy to
Order
And
Quick
Shipping
★★★★★
★★★★★
Steven P - March 22, 2020
Verified Purchase
Refrigerator Water Tube
The refrigerator water tube which I received was the correct part for the job. It worked exactly as expected and needed.
★★★★★
★★★★★
Frank C - September 4, 2019
Verified Purchase
Correct Part1
Part was the correct one I needed while another site failed and cost me time... Thanks for the picture which helped!
★★★★★
★★★★★
Bruce C - May 7, 2019
Verified Purchase
Filter inlet water tube
Part appeared to be factory original. Simple installation. Removing the filter housing made it easier to make sure the tube was seated fully into the filter housing. Recommend replacing filter tube if the water inlet valve is replaced. The inlet tube began leaking at the hold down clamp on the back of the refrigerator shortly after I replaced the water inlet valve. Probably stressed the tubing moving the refrigerator in and out from the wall. The refrigerator is 14 years old.
★★★★★
★★★★★
Ricky C - March 12, 2019
Verified Purchase
Great part. Factory OEM fit
The right part at at the best price I could find.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 16 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
There was a split/leak in the main water supply line for the unit.
Replaced the supply line following the directions supplied by the video that was provided with the part order. I could not have done it as well an in the short amount of time required without the aid of the video. I would not have known that the water filter housing/unit had to be removed to facilitate the repair.
old inlet tube was leaking and direct replacement was out of stock
I replaced the filter inlet tube with this filter inlet tube because the refrigerator looked the same and I thought it would therefore be approximately correct. It was except for the connection to the copper tube feeding into the plastic tube. The fitting was not compatible and needed to be cut off and replaced with a new ferule and fit
... Read moreting purchased from a local hardware store for about two or three dollars.
Read less
Anthony from WELLESLEY, MA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water supply line to refrigerator developed three pinholes
I watched the recommended you tube video multiple times. I made sure to have the tools and towels ready. I shut off the water supply line, and capped it, removed the backing, and inspected the back. By following the video, the rest was easy. I recommend removing any built up dust and dirt while you have the front apart.
Julie from COMMACK, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking from the supply line to the water filter
Purchased a new line, watched the video. The video was a bit misleading the filter housing does not slide out the front to access the removal of the line. I doing so I broke the clip holding the smaller line had to order the complete housing. 90 dollars it's repaired now so all is well .
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Water Line Leak
My water line to refrigerator sprung very small leak due to years of rubbing on its own bracket holding it to back of refrigerator. The removal and installation are exactly like shown in the video on PartSelect website. A possible problem can arise when removing and re-inserting the water line into "colletts" on the refrigerator filter
... Read morehousing. The grey circular colletts push in and out, not far, but after years of use can be brittle. If you move the colletts too much, a small part of plastic can snap, and you will then need an entire new filter housing. Be gentle when depressing the collett to pull out and push in the water line.
Read less
Steven from RNCHO CORDOVA, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet tube cracked and started leaking
Woke up to a wet wood floor and rug due to inlet tube spinging a leak/cracked. Watched repair video on utube. Ordered the part. And did the repair. But the other parts that the tube connects to started leaking due to age I assume and moving things to reach the part that tube went to. Old parts started leaking when I turn water back on. So
... Read more now I have to replace the inlet valve and filter sleeve next. Hoping that will solve the issue and have ice again with out a wet floor and rug.
Read less
Judith A from Pahrump, NV
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pinhole leak in the water supply line to the fridge + bad ice guide
Reviewed the installation instructions...and it turned out they were both dead on! Had to loosen the parts that were accessible from the front (but not remove them) as I had to work the fridge around the island in the kitchen and had some access restrictions, but other than that it was a simple and easy fix.
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
August 28, 2017
Filtered water dispenser won't stop leaking. Where do i find the seal or valve that controls it ?
For model number ET1FHTXM004
Hi Dennis,
Thank you for your inquiry. There is a video listed with the part that be of assistance to you regarding this situation. You may find the video on website just below the information on the part. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Daryoush
September 29, 2017
The filter inlet tubing popped out of the connector that connects the main water line and the filter. The compression nut could have failed. I tried to put the tubing through the compression nut and back on the connector, but as soon as the water turned back on the pressure pushed the tubing out. I'm not sure if the compression nut failed, the tubing, or there is too much pressure in the filter. Will this part be able to connect to the connector with a possibly failed, old compression nut? Thank you
For model number Kenmore 52693100
Hi Daryoush,
Thank you for your inquiry. There is a video on our website that you may reference that may help you with this. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Alexis
March 13, 2019
Will this part work with my model #?
For model number ED5FHEXVS00
Hello Alexis, thank you for your question. For model ED5FHEXVS00 the Filter Inlet Water Tube is part PS11740254.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Vernon
July 12, 2021
How to remove and replace leaking supply line
For model number ED5SHAXMT10
Hello Vernon, Thank you for the question. We suggest watching the How to Video on replacing the Line. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
November 3, 2017
Does the new water inlet kit come with a new plastic fitting, as i have broken mine. Should have watched the video first.
For model number ED5FHEXMB00
Hi Tom,
Thank you for your question. Yes, the quick fittings would be part of your water inlet valve. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Eddie
January 16, 2018
My refrigerator makes a hammering sound when dispensing water thru the door or when the ice maker fills. What could be the problem? Thank you.
For model number ED5LVAXVQ00
Hi Eddie,
Thank you for your question. If you are hearing a sound like a jackhammer when you are getting water from the dispenser, the issue is with the water inlet valve. The noise is caused by a mechanical failure inside the water inlet valve and it will need to be replaced. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jaime
November 30, 2018
Where can i purchase just the hose retainer (5/16" not the 1/4") for the water filter? It is the part that must be depressed to remove the hose from the filter assy.
For model number 106.51574200
Hello Jaime, Thank you for your inquiry. The hose retainers that the lines go into are part of the water filter housing assembly, part# WP2186443, and are not sold separately. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
December 12, 2018
Do you have the video and the parts to fix a water leaking from the tube to go inside the freezer door
For model number ksrg25fkbt04
Hello James, thank you for your question. The tube that runs up the inside of the door to the dispenser is PartSelect Number PS886371. We do have an installation video on installing that part on our site. It is found below the picture of the part when you search the part number. Good luck with your repair!
Filter is missing. Filter housing is gushing water. Do i have to have filter inserted to stop leak and to get ice and water?
For model number TS22AFXKQ00
Hi Marie,
Thank you for your question. There should be a water filter in place in the water filter housing. A water filter may stop the leak, but you should also check the water filter housing to make sure it is not the cause and check the tubing and the water inlet valve as well to see if they are working correctly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
William
February 7, 2018
How do you access the water dispenser tube in the door, it started leaking at the hinge and there is not enough to couple to and if there was i would not be able to get the grill back on
For model number KSRG22FTSS01
Hello Williams, thank you for your question. This video on replacing the tube that runs up through the door and to the dispenser should help with removing and replacing the dispenser tube. I hope this helps!
https://www.partselect.com/PS886371-Whirlpool-8201537-Water-Dispenser-Fitting-and-Tube-Assembly.htm?SourceCode=1&SearchTerm=KSRG22FTSS01&ModelNum=KSRG22FTSS01&ModelID=698161
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
