Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul K - September 16, 2020
Verified Purchase
Repair went great.
I have water again.
★★★★★
★★★★★
John O - January 5, 2019
Verified Purchase
Exact part and instructions I needed
Great instructional video
★★★★★
★★★★★
Joseph J - July 10, 2018
Verified Purchase
One word, perfect!
Thank you PartsSelect for being a life saver. I noticed a very small leak coming out of my fridge and quickly determined it was from the water line leading to the dispenser. The parts arrived in great condition and with the help of your How To video, installation was a breeze! I followed your simple, easy to understand instructions and had my fridge back to normal in about 15 minutes. Thank you again!!!
★★★★★
★★★★★
Scott M - June 28, 2018
Verified Purchase
Just what I needed
Exactly as advertised. Just what i needed to fix the water dispenser
★★★★★
★★★★★
Rob B - May 10, 2018
Verified Purchase
Right part, easy install
The part arrived in the time frame promised, fit easily, was an improvement over the original in design and materials, and the installation video made the job easy.
★★★★★
★★★★★
Scott G - March 6, 2018
Verified Purchase
Good turn around time on delivery
The tubing and fitting was an easy repair using the online video. It saved me a lot of money over what I would have spent for a service call.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser tube became brittle and broke due to heat from the light in the door
Followed instructions from your Youtube video. Everything went as described. Thanks for the help!!
William from BOISE, ID
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Water Dispensor Tubing Had Become Brittle And Broke .
Removed the face plate. Removed a few screws and unpluged a few electrical connectors and pulled apart. Removed the holding bracket and clear tubing from door. Cut new tubing at an angle to push through conduit. Reinstalled new bracket and re-installed electrical connectors. Snapped face trim on and bleed air out of system. . W
... Read moreater ran great.
Read less
Conrad from Tucson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
209 of 346 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
19 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Betty
August 8, 2017
Where do i get the anti drip valve? The tubing has started to drip all the time. Will replacing the tubing correct the dripping?
For model number ED25TEXHT02
Hi Betty,
This appliance unfortunately does not have an anti-drip valve. You could replace the tubing but I would suggest inspecting the parts to try and pin point where the dripping is coming from. It could even be your water inlet valve that is causing the dripping. I hope that helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 30, 2019
The water dispense tube on my 20 yr old KitchenAid frig does not have the metal bracket. Instead there is a plastic mounting piece that is an integral part of the tube end, and it attaches to the dispenser lever with a screw. This mounting piece and tube end broke. Is this part available for my frig? If not, will the replacement metal bracket and white tube fit on my frig?
For model number KSRS25FGWH02
Hello Paul, Thank you for your question! Upon reviewing your model I show that PS886371 is the correct part now being suggested for this model. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
September 26, 2017
Water is leaking all over the ice maker/water dispenser top of unit. I can't figure out how to take off the front plastic cover to see what is wrong. How do you take it off?
For model number MSD2542VEB
Hi Carol,
Thank you for your question. You can remove your front cover with a putty knife. Cover the edge of your putty knife with a piece of painters or masking tape. There are two indents at the bottom part of your frame. Slip the putty knife between your frame and your fridge at the bottom right and left hand corners. Then pull toward you and up. That should pop off your frame from being locked into place and you will be able to remove it. When disconnecting the switch from your fridge to remove the front cover entirely, be sure to unclip your wiring harness at the back. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
May 1, 2018
Water dispenser periodically drips but after a couple of pushes on the lever it tends to stop. Any ideas on what could cause that and what part(s) to change...thanks
For model number GS6SHAXLS03
Hi Tony, Thank you for the question. I suggest testing the Micro Switch, PartSelect Number: PS11738948 with a multi meter to check for continuity or if it is stuck. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Lillie
February 12, 2019
Water comes out very slow,what could be wrong?
For model number ED5LVAXVQ00
Hello Lillie, Thank you for contacting us. I suggest checking the following parts: PS11739027 Control Bracket, PS11738948 Micro Switch, PS3497634 Water Inlet Valve, and PS11722128 Single Water Filter. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
January 22, 2018
The water dispenser leaks or drips continuously from time to time. Is there a shut off valve on the water dispenser that needs replacing or is there an adjustment that can be made to stop this ?
For model number KSCS25FKSS01
Hello Robert, Thank you for your inquiry. We do not show a shut off valve on the water dispenser. I would advise checking the water supply tubes for any cracks or clogs, and check the water filter and water inlet valve. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Don
February 9, 2018
Water has a drip down the inside of the freezer door on to the floor. I have a water/ice dispenser on front of the freezer door. Can the water line go to the bad and need replaced?
For model number ED5DHEXWB00
Hello Don, Thank you for your inquiry. It can crack or get clogged. Check the lines to make sure they are not frozen, then disconnect them and run water through them to see if there is any leaks. You may also have an issue with the connecters/fittings as well. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
February 22, 2018
The front water dispenser leaks very fast only when my outside lawn sprinkler's come on. It is not a full flow like when i am filling up a glass but a soft drip flow to make a mess as long as the sprinklers run. I have also noticed that when i want a glass of water, the flow has decrease lower than in the past. My refrigerator is 14 years old but works great other wise.
For model number KSSC42QMS01
Hi Tom,
Thank you for your question. It sounds like you will have to replace your water inlet valve. I could suggest testing it with a multi meter to double check if it is working correctly. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
William
March 8, 2019
Will this part ( ps886371) work with my 106.59562990 or do i need ps11742481?If i need ps11742481, does the installation differ significantly from the video shown?
For model number Kenmore 106.59562990
Hello William, thank you for your question. The only part that is guaranteed to fit and recommended for your specific appliance is PartSelect Number: PS11742481. This is the one that is compatible with your unit. The overall installation should be the same as the video for PS886371. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
September 4, 2019
Water will not disp and makes no sound-still disp ice
For model number ED5LVAXwso1
Hello Terry, thank you for your question. We would recommend testing the Micro Switch Part Number: WP2162361 to determine if it has failed. If the switch doesn't activate the unit will not dispense the water. If that part is fine, the issue could be with the dispenser port on the valve which would require the water valve be replaced. I hope this helps.