Quick Question!

Have you ever purchased from PartSelect.com before?

885545-1-S-Whirlpool-8185234           -Exterior Door Panel with Glass - Black
885545-1-S-Whirlpool-8185234           -Exterior Door Panel with Glass - Black 885545-2-S-Whirlpool-8185234           -Exterior Door Panel with Glass - Black https://www.partselect.com/Schematics/Whirlpool/6VDYOOPA.gif

Exterior Door Panel with Glass - Black

Your Price

$131.88
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS885545
Manufacturer Part Number 8185234
Manufactured by Whirlpool

This is NOT the complete door.

This part works with the following brands: Whirlpool.

This part works with the following products: Microwave.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Dale from South Woodstock, VT

The handle and lower right corner of the plastic door cover had broken

repair was very straight forward and can be done by anyone with reasonable mechanical ability. I read in a couple places where appliance repair people had said it was best to replace micro wave unit as it was near impossible to do repair. Pure rubbish; only problem I had was when the door and glass u it arrived the glass wasn't glued in completely and I had to clue it myself. I removed the three screws on the right end of the door and took my large pocket knife and ran it down the joint where the outer cover meets the metal door. first the top and then the bottom and the old door popped right off. removed the old handle from old door for the screws needed to reattach the new handle to new cover. I started the screws on the counter to get threads started in plastic made attaching to cover easier. hen started by pushing the new cover onto the left end of door the continued squeezing the cover on along to the right first top and then the bottom a little at a time and it snapped right in for me with a fair amount of pressure, replaced the three screws and it works great looks like new. I did remove the upper vent to clean and that helped some with installing. Very easy and beat the heck out of trying to replace the entire unit. I think the so called appliance repair people only wanted to sell and install a new one for $$$$.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: MILES from ALAMOGORDO, NM

Microwave door exterior panel was cracked and the handle was broken

I disassembled the door by removing three screws from the side opposite the hinges and pried (lifted) that edge up and rotated the panel away from the metal portion of the door towards the hinges. I assembled the new door panel by attaching the handle (2 screws). I attached the new door panel by starting at the hinge side of the door and working towards the opposite end of the door. The last little bit was tough to get it to snap over the metal sub-door. I reinstalled the 3 screws to snug, not tight because I did not want to crack the plastic.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 37 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Elijah from Killeen, TX

I had several broken appilances broken with parts to be replaced.

I had ordered the parts from Part Select and came with in a week. I ahd a Whrilpool microwave that had a door panel and vent grille that needed to be replaced and that was rplced with ease took less that five minutes to do. My Maytag refridgerator had it kickplate grille replace along with the pivot block that took all of about two minutes. The longest job that took about 5 minutes was my Whirlpool glass oven door that needed to be replaced, but that was pretty ease to replace also with an extra hand from my son. I just didn't want to break another glass door or I would have done it myself plus I was teaching him how to do self reparts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS885545
Manufacturer Part Number: 8185234
Brand Model Number Description
WhirlpoolMH1140XMB0Microwave - Hood Combo
WhirlpoolMH1140XMQ0Microwave - Hood Combo
WhirlpoolMH1141XMB0Microwave - Hood Combo
WhirlpoolMH1141XMQ0Microwave - Hood Combo
WhirlpoolMH1150XMB0Microwave - Hood Combo
WhirlpoolMH1150XMQ0Microwave - Hood Combo
WhirlpoolMH1150XMS0Microwave - Hood Combo
WhirlpoolMH1150XMT0Microwave - Hood Combo
WhirlpoolMH2155XPB0Microwave - Hood Combo
WhirlpoolMH2155XPB1Microwave - Hood Combo
WhirlpoolMH2155XPB2Microwave - Hood Combo
WhirlpoolMH2155XPB3Microwave - Hood Combo
WhirlpoolMH2155XPQ0Microwave - Hood Combo
WhirlpoolMH2155XPQ1Microwave - Hood Combo
WhirlpoolMH2155XPQ2Microwave - Hood Combo
WhirlpoolMH2155XPQ3Microwave - Hood Combo
WhirlpoolMH2155XPT0Microwave - Hood Combo
WhirlpoolMH2155XPT1Microwave - Hood Combo
WhirlpoolMH2155XPT2Microwave - Hood Combo
WhirlpoolMH2155XPT3Microwave - Hood Combo