Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mine S - March 23, 2021
Verified Purchase
Easy repair
The part was in great condition, came fast, fit the dishwasher perfect. The video made the replacement very easy! Thanks
★★★★★
★★★★★
Kelsey S - January 29, 2021
Verified Purchase
Worked perfectly!
We accidentally broke the latch on our dishwasher and had no idea where to start to find a replacement. When googling it, this site came up and when I looked, the part description said it fit my dishwasher. I was still nervous it was wrong somehow but ultimately I took the risk. We got it and the video for how to do the repair was so helpful and it was SUPER easy to fix. $32 for a part was well worth the price for how to install it and also not needing to buy a new dishwasher. Our dishwasher runs great now!
★★★★★
★★★★★
William R Glover L - July 18, 2020
Verified Purchase
easy repair
Your site helped me trouble shoot my dishwasher and then made installation of the door latch easy
★★★★★
★★★★★
Antoinette O - May 13, 2020
Verified Purchase
Easy repair
Shipping very fast. Very happy with purchase.
★★★★★
★★★★★
Lourdes A - April 24, 2020
Verified Purchase
Latch for dishwasher door broken.
We received new latch part for dishwasher door in a few days. The new part was metal and much stronger. It replaced a plastic part. It was easy to install and the door closes properly. We're very happy with this purchase.
★★★★★
★★★★★
Kenneth S - March 26, 2020
Verified Purchase
Easy fix.
Arrived early. Just what was needed. Easy to install.
★★★★★
★★★★★
Kayleen J - November 9, 2019
Verified Purchase
Part works great but took longer than 1.8 days to receive
The part was perfect. The promised shipping date, less than desirable. A problem when I'm trying to schedule the work done. Can live with a later date, not so happy about an inaccurate ship date.
★★★★★
★★★★★
Randal P - October 29, 2019
Verified Purchase
Dishwasher door latch
This part was exactly what I needed, went in without any trouble and worked perfectly right out of the gate, will look to use this company for future needs.
★★★★★
★★★★★
Paul W - August 17, 2019
Verified Purchase
Nice install
The part was a definite upgrade to the old latch. It came on time, and I’m happy with it. The install instructions were a bit lacking, especially for the novice do it yourselfer. Otherwise I’m very happy with the delivery time and the ease of ordering.
★★★★★
★★★★★
Alan K - March 14, 2019
Verified Purchase
After a couple of failures its an easy fix
At first I thought it was a board failure and then a console failure, but finally figured out the door switch was intermittently not always making contact when the door was closed.
Changed the latch assembly to the new version and have not had a problem since.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 10 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
door would not latch
We followed the video instructions, at times running to the computer to check the video.. The hardest part was getting the door to slide back on.. Thank heavens for the video.
Keith from ALBANY, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not lock
Followed the u tube video. No problems. Will use them again.
Best recommendation I can give.
Robert from STATEN ISLAND, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door latch failure.
Prepared by watching the video. Great instructions. Great.
Disassembled easily as per video. Removed the old latch and installed the new.
Began the reassembly and learned that after ten or more years the small plastic parts used to keep the dishwasher steady had slowly deteriorated to the point that I was break
... Read moreing these necessary items faster than I was putting the appliance back together.
What was a half hour task became over two hours and the end result was for me to put my tools away and buy a new dishwasher the next day. I learned that if your appliance is over ten years old BUY A NEW ONE!
Great job by the people who make and sell the latch parts for you who own a dishwasher that is only a few years old.
Thank you Part Select.
Read less
David from FLORENCE, OR
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack adjusters fell apart and would not slide back and forth.
I followed the Partselect video for the new installation. Very easy to follow which made new part installation extremely easy. Works perfect now!!!
Joseph from DREXEL HILL, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwaster would not reliably start. Just blue flashing light
Removing the door was straightforward. However, when the door panel was removed, I grabbed the door and my finger touched and pressed on something on the right side. This is an optical collector which focuses 3 lights (red, blue, green) into a visible slot. After I reinstalled the door, the lights were not visible. I had to disassembl
... Read moree the door a few times and bend this optical collector into the right position. Basically, I bent the collector into the door, so I needed to bend the collector away from the door. And now, everything is fine.
Read less
Michael from SANDY, UT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would no longer latch
cut power to dishwasher. removed screws all around door panel to get front panel off, leaving top two screws for last. unplugged latch set, removed it. set new one in. screwed top 2 screws in. fit door panel back on. pulled out latch hook from stationary top piece and clicked new on in place.
Abby from SACO, ME
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not turn on
Watched a video and read through written directions. Did not need to pull out the dishwasher from the cabinet.
Lucille from MODESTO, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not turn on and door did not latch properly.
New latch assembly improved door closure. However, door latch did not solve problem. There appears to be another problem.
Robert from BOULDER, CO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
15 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inoperative door latch replaced by a redesigned latch
1. Disconnect power at the breaker, 2. remove two wood screws fastening the dishwasher to the cabinet and slide the unit out approximately 2 inches. 3. Remove old latch strike and replace with redesigned strike. 4. Slide unit in and reattached to cabinet. 5. Remove 11 screws holding inner panel of door assembly and one screw holding
... Read more user interface unit to door. 6. Disconnect snap cable to latch assembly and replace the latch unit. 7. Reassemble.
Read less
Arthur from NEWNAN, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
34 of 41 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When the door was in the closed position there was no power to the unit. The control panel buttons would not put the dishwasher in any cycle. the panel lights did not work.her
I first verified that there was 120 volt line voltage getting to the unit. I removed the outer door panel by removing the 10 torx screws located around the panel on the tub side of the door. Two of the screws are longer so note there location for reassembly. The door handle can now be removed. Pull the outer door panel away from the inner
... Read more panel and remove the connector to the control board. Set the outer door aside. Remove the connector to the door latch.The latch is snapped in position at the top side. Pry using a screw driver to release. Snap new latch in position. Snap on connector, Reassemble door by first reconnecting the control panel connector. install plastic door handle. Mate door to inner panel. Note interlock tabs between outer door and inner panel near the bottom area. Install the 10 screws. The two longer screws are at the top holding the latch and handle.
Read less
ROBERT from WOODBURY, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
20 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leo
October 17, 2017
I have no power to the unit, there is power at the connection to the washer,none of the lights will come on,it appears the unit is dead,is there a fuse somewhere? Or failed door latch?
For model number kude70fxpa5
Hi Leo, Thank you for the question. If there is no power in the controls it sounds like the control board needs to be replaced, PartSelect Number PS11726163. If the door latch was defective you will still have lights and power but the dishwasher would not start.Hope this helps!
The cancel is stuck on and none of the other control buttons work.
For model number MDB6769PAS1
Hello Max, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: door latch, control panel and control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Darrell
February 8, 2018
Kitchen aid dishwasher 6 yrs old...replaced thermal fuse 3 weeks ago which seemed to fix my problem (no lights no power on inside door panel)...but now same thing happening again (no lights no power on inside door panel)...have not removed door panel to inspect thermal fuse, but will do so today). if the thermal fuse is out again, what other problem may be occurring to cause this ripple effect? i do not want to keep replacing thermal fuses every 3 weeks. thank you for your input.
For model number KUDC10FXSS4
Hello Darrell, thank you for your question. If the thermal fuse is still good, the problem is probably the electronic control board that is the issue. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Anand
November 6, 2017
Hello: I have a KitchenAid dishwasher with model no: Kudc10ixss1. If the buttons do not respond, i shut off the power and turn it back on after 10 to 15 minutes.. then it works. lately, it no longer works and the cancel/drain light indicator is always on with a blue dim/low light. there was also a time that when i press the normal wash, heated dry and start buttons, it blinks and lights shuts off and after a few seconds, the washer will start running. please advise what parts shall i need to replace. thanks!
For model number KUDC10IXSS1
Hi Anand, Thank you for the question. This would indicate there is an issue with the Electronic Control Board, Part Number: PS11753985 and it will need to be replaced. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
September 28, 2017
I have no power and no lights on the control panel.
For model number KUDE70FXSS4
Hi Larry, Thank you for the question. If the control board is not powering on, it will need to be replaced,PartSelect Number PS3651408. Hope this helps!
Can a faulty door latch kill power to the dishwasher
For model number KUDE20IXSS9
Hi Joyce, thank you for your question. Yes, if the micro switches are not working then it will not allow power to go to your control board as it believes that the door is open. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Russell
December 2, 2019
My dishwasher will not start, it will fill with water and the soap door opens it will drain but will not run.
Hello Russell, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
November 8, 2018
My door opens during cleaning . The unit is level , all lights work heat cycle works. I have to reset power switch after each use to reset the unit . Do i need control panel and a door switch or just control panel
For model number Wd1710paym0
Hi David, thank you for your question. I would suggest first checking your door switch for an issue. It sounds like that part is not locking correctly. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chris
June 3, 2019
My 2012 jenn air dishwasher jdb8200aws0 will stop after having been on for 15 seconds. 1/. I have shut the power off for 2 minutes (tripped the circuit breaker at the house panel) to reset/reboot the control module. 2/. Re-engaged the house panel cb, power is then restored to the dishwasher control panel as the lights come on. 3/. I select a programme, the dishwasher starts, then stops in 15 seconds. I have repeated this several times. I am fairly certain this is not the micro switch in the latch mechanism but probably the control module circuit board. Q1/. Does this sound correct to you? Q2/. What is the the part number for the control module for a 2012 jenn air jdb8200aws0. Any other advice or troubleshooting tips would be greatly appreciated. Thank you.
For model number JDB8200AWS0
Hi Chris,
Thank you for your question. If the dishwasher is shutting off after a few seconds, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door latch, the door balance link kit, the turbidity sensor, the electronic control board, the drain pump, the overfill control switch, the thermostat and the wiring. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Wayne
July 25, 2019
My Whirlpool dishwasher works fine but when finished washing the door sticks at the top and needs to be pried open with a screwdriver. The door seems to latch fine for washing. Is the problem the latch or something else?
For model number WDF530PAYW2
Hello Wayne, Thank you for the question. If it latched normally when closed and it can be pried open, the latch sounds like it is ok. I suggest checking to see if the hinges are bent and the door is sitting level. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
