Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Arloah
March 1, 2018
I need to replace the timer and knob for this model, can you tell me the correct model number for each part. Thank you.
For model number GTDP220EF4WW
Hello Arloah, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS8690648 for the timer and Part Number: PS8769912 for the knob. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
December 25, 2017
2 of my control knobs on the left are strip: (signal knob) and (fabric care, knob). On the right, the (cotton, permanent press, time dry knob). Please help me select the correct knobs to order. I noticed the clip is not in the time dryer knob. Could this have even the reason for stripping. The knobs split on both side. Thank you and i expect to hear from you soon. Patricia
For model number GTDP220EF4WW
Hi Patricia,
Thank you for your question. This is the correct timer knob for your appliance. I have listed the information for your other knob that you would need two of down below. Yes, that could be the reason for the stripping. I hope that helps. Good luck with your repair.
Do you have a stock of the dryer knob for this model?
For model number GTMX180ED0WW
Hi Joseph,
Thank you for your question. The part number listed under your model number for the timer knob is PS8769912. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
EG
June 5, 2019
The knob that the timer dial fits on broke off. What part do we need to order to replace it?
For model number GTDP220GF3WW
Hello EG, thank you for inquiring. This Timer Knob for your model slips onto the Timer itself, which is part PS9491767 for your model. We hope this answers your question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
ALAN
June 19, 2019
Need dryer timer knob, what is the model number
For model number GTDX180ED2WW
Hello Alan, thank you for inquiring. For your model the replacement is part number PS9493075. The D-Shaped Knob Insert Clip for it is part number PS267091.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marc
July 16, 2019
The white timer knob is broken on dryer. What part # should i purchase to replace this? Thanks in advance for your help.
For model number GTDP180EDOWW
Hello Marc, thank you for inquiring. The replacement for your model is Control Knob and Clip part PS9493075. Good luck with your repair!
Was this helpful?
Thank you for voting!
Helly
August 13, 2019
The timer knob broke and I was able to find it. The d shape shaft also broke and I can’t find the part number. Could you please provide it? Thanks
For model number GTDX180EDWW3
Hello Helly, Thank you for the question. The Shaft is only sold as part of the Timer switch, PartSelect Number PS8690648. Hope this helps!
The timer knob on my dryer broke and i've been using plyers to turn it on and off for months, but now the little d-shaped shaft is broke. What parts do i need to fix this?
For model number GTDP280GDOWW
Hi Coletta, you will need the timer PS9493080 and knob, PS8769912. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Cecil
September 2, 2019
What is the part number of the timer knob?
For model number ge gtdp280gd0ww ...dryer
Hello Cecil, thank you for your question. The timer knob for this unit is PartSelect Number PS8769912. I hope this helps!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
replace timer
took back off dryer, removed one screw with Torx wrench securing timer, removed one wire at a time from old timer placing on new timer to ensure correct wiring, put timer back in place tightening the one screw to secure. Took less than 10 min. Works perfectly and I saved myself $200 repair bill from Sears, the total for buying my parts at this site about $80. Well worth doing it yourself.
The timer knob was cracked and wouldn’t turn properly
Replaced the knob
Susan from MURFREESBORO, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken timer knob
removed old broken knob just pulled it off,replaced with new one took about five seconds.
Arthur from VICTORVILLE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer would not turn
UN PLUG DRYER used screwdriver to remove 3 screws on back panel took control pannel and slid to the left to sepreat boyh panels used paper and pen to make picture of wires . push down on 2 side tabs turned timer and removed took off wires.to install just reverced process when done install knob and test,
paul from ABERDEEN, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob stopped working
I took the new knob and stuck it on the shaft. That’s all
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
