Part Location Diagram of WH23X10030 GE Drain Pump and Motor Assembly
See part 655 in the diagram
Replacing your General Electric Washer Drain Pump and Motor Assembly
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Drain Pump and Motor Assembly WH23X10030

 Fits your VBXR1090DBWW!
★★★★★
★★★★★
35 Reviews

Rated by 83 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 72.39
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your VBXR1090DBWW!
PartSelect Number PS8768445
Manufacturer Part Number WH23X10030
Manufactured by GE for General Electric, Hotpoint
Product Description

Drain Pump and Motor Assembly Specifications

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If you notice that your washing machine will not drain, there is a good chance that you will have to replace the drain pump. The drain pump is located inside the washing machine, near the bottom. To access the drain pump for this repair, you will need to remove the front panel. Before you begin this repair, be sure that the power source is disconnected and the water source is shut off.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Washer Drain Pump and Motor Assembly

Replacing your General Electric Washer Drain Pump and Motor Assembly
Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking
This part works with the following products:
Washer.
Part# WH23X10030 replaces these:
AP5803461, J27-769, TRUCK, TRUCK-1, WH16X0521, WH23X0081, WH23X0091, WH23X0092, WH23X10003, WH23X10013, WH23X8081, WH23X81, WH23X91, WH23X92, WX05X0129, WX5X129
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
35 Reviews
4.4
Filter By Rating:
  • 5 Stars
    24
  • 4 Stars
    7
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    2
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 83 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not drain / Agitator noisey
Disconnect electrical cord from outlet . Removed Front panel of cabinet , removed water from tub with my shop vac , disconnected hoses and electrical connections to pump , removed the two 3/8 bolts that secure pump to bottom of cabinet and removed the pump . Replacement of pump was exactly everything in reverse only hoses went on first. Agitator only required a small tug which exposed the 7/16 bolt that secures the agitator coupling . A simple remove and replace operation paying attention to the ribs which align to the channels inside the agitator . A small push locks it into place . Finish with replacement of front panel of cabinet.
Other Parts Used:
Drain Pump and Motor Assembly Agitator Coupling Kit Fabric Softener Dispenser
  • John from PRINCETON, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not pump out of the unit or spin
If you follow the video that part select provides you will be just fine.
  • Charles from SHIRLEY, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not draining out of the washing machine
The front panel has to be taken off to access the washing machine pump. To do this I used a putty knife I inserted the putty knife in the slot at the top of the front panel where it meets the top of the machine to release the clip that holds the panel in place. Once the panel is off the pump is mounted to the bottom of the machine with two screws. There are also two hoses attached to the pump that need to be taken off. Before you do this you have to get as much water out of the machine as you can to minimize the amount of water that will come out when you disconnect the hoses. My recommendation is to replace the spring type hose clamps the manufacturer uses with a screw type hose clamp. These are much easier to put back on once the hoses are in place. You are not fighting the spring clamp while trying to put the hose on in a confined space. Then put the front panel back on. This may take about a half hour if you do not have too much clean up because you didn’t get enough water out of the machine.
  • David from SAINT CLAIR, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was stalling in rinse cycle and not draining
Removed the front of the washer, screwdriver used. Disconnected the electrical wires from the pump. Removed the two bolts from the water pump bracket, socket wrench used. Disconnected the pump to exterior drain hose, plumbers wrench used to loosen tension clips. Drained all the water out of the washer tub, not easy not very neat. Disconnected the washer tub to water pump drain hose. Removed debris that was in the hose. Then connect the hoses to the new pump, bolted the bracket back in place, put the front of the washer back on.
  • Stephen from RIDGE, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not drain
Watched the video, good video. But instead of taking the bolts out first, it's easier to remove bolts last, to give support to remove the hoses.
  • Terry O. from Pie Town, NM
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water wasn't being pumped out.
The pump would stick and not pump the water out from time to time. I have removed the pump before and cleaned it so to replace it wasn't much different for me. The instructions on the web site were pretty straight and easy to follow.
  • Richard from Ridgeland, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Clothes were still Wet after Spin Cycle and I could smell something burning like Electrical type smell.
Unfortunately this did not solve my problem. After further inspection I still have the burning smell and the washer cuts off after it Agitates for a few seconds then in a minute or so it will Agitate a few more seconds and then cut off again. I also replaced the control panel still have the same problem. I would say it is the motor but the motor works fine in Spin Cycle. As for the Pump replacement it is very simple just follow the instruction Video on this site and 15 minutes later your new pump is installed. I will keep the pump since my new Washer uses the same part. P.S. The burning smell is not coming from the belt. It's almost like some kind of circuit protector is tripping and then a few minutes later it lets the washer start again.
  • Mark from Keithville, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing Machine Pump
The website was tremendous. Everything was right there, easy to understand. The 'repair' video was outstanding; made it sooooo much easier. Would use this site over and over again (but hope I don't have to use it that much! lol).
Other Parts Used:
Drain Pump and Motor Assembly V-Style Drive Belt
  • Bob from Sun City West, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't pump water
Removed the old pump put in the new one
  • Robert from Nampa, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was not draining from washer
My wife calls me and says that the washer is not draining water so I was like "great"...here goes more money. After I tried draining, cleaning, checking for leaks, I looked up possible causes and came across the water pump. I have bought from parts select and I love this website so I jumped on here, found the causes, diagram, installation videos, and cheap parts. Added to cart, paid, and was here in about two days. I disconnected the electricity, opened the front lid, took off the two hoses, unscrewed the pump, swapped in the new one and hooked it back up. The washer works like new, took me about 10 minutes. Thanks Partselect!!!!
  • Jesus from Casa Grande, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

35 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
September 19, 2017
Water drains as it tries to fill. Turn off the switch, the draining stops. Turn on the switch and the water drains as it tries to fill again.
For model number GLWP2000M0WW
PartSelect logo
Hi Dennis, Thank you for the question. The first thing to check is your washing machine drain hose,it might be pushed too far into the stand pipe in the wall. There needs to be an air gap and if the drain hose is pushed too far in there is no air gap. This creates a vacuum or siphoning and the water is siphoned out of the tub as it fills with water. There needs to be a bend at the apex of the drain hose. It needs to be above the height of the wash tub. Hope this helps!

24 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
October 1, 2017
When it comes to the spin cycle, the washer will not spin to help eliminate the excess water out of the clothes, it drains but will not go into the spin cycle.
For model number WJRR4170G1WW
PartSelect logo
Hello Michael, thank you for contacting us. You will want to test the door switch/latch as a faulty one can prevent the washer from spinning. Also it could be the drain pump and motor assembly. Good luck with the repair!

14 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
September 21, 2017
Twice the washer wouldn't drain. I would come back later and try the drain cycle and it would drain. My wife thought she smelled something like it was burning. I heard it yesterday and when it came to the drain cycle it didn't sound right. Looked inside it was not draining. Took all the clothes out and tried multiple times to drain with no luck. Tried this morning and it drained but was slow on getting started. I'm thinking of replacing the pump.
For model number GTWN4000MWS
PartSelect logo
Hi Tom, Thank you for your question. It does indeed sound like you would have to replace your drain pump and motor assembly. Good luck with your repair.

11 people found this helpful.

Was this helpful?
Thank you for voting!
Megan
October 7, 2017
Decided to wash a few pillows last night when my washer started making horrible sounds when i looked in i saw that one of the pillows had a tare and there was stuffing every where. I opened the washer up and i'm assuming the stuffing has gotten lodged into the motor because it is no longer moving now my washer will not drain or spin. My question is what other repercussions could this stuffing have what else could or probably has broken? Should i just but a new dryer or just buy the motor?
For model number WCSR2070TBWW
PartSelect logo
Hi Megan, Thank you for your inquiry. It is possible that the stuffing has gotten into the pump and the hoses and you will need to check them. I hope this helps. Thank you and have a great day!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Claudio
November 12, 2017
Hello, my washing machine is operational and nothing new has changed on how I do laundry (water temp., detergent, etc). The last couple loads the clothes smell bad, like stagnant water.The clothes drum is empty of water but I'm assuming some water is remaining in machine an thus the stagnant water smell ? Would a new pump take care of this ? Thank you for your time.
For model number WHDRR418E1WW
PartSelect logo
Hi Claudio, Thank you for the question. I would check to see if any small items (socks ect.) have got in between the basket and drum or under the agitator base.Also make sure the drain hose is not clogged.You can try to run your washing machine empty on the hot wash setting, with some baking soda and 2 cups of vinegar, to thoroughly flush out mildew and dirt residue between the basket and the tub. Again, running another quick rinse cycle afterwards, also at a high temperature will ensure no vinegar remains for your next load of laundry.If the smell stays I suggest replacing the pump. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Bob
December 17, 2018
Our washer fails to drain even though the pump seems to be running. Could there be an obstruction or blockage? Where would i look for blockage?
For model number Model GTWN4250MIWS
PartSelect logo
Hi Bob, Thank you for your question. If the washer is not draining, the majority of the time the issue is the drain pump. If it is clogged with debris, you will need to inspect it. There are some parts that you will need to check to see which ones are causing the issue. You will need to check the drain hose, the belt, the pump to cabinet drain hose, the lid switch and the pump to tub inlet drain hose. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Marc
July 11, 2019
Does part number wh23x10030(drain pump) fits on my model..if not would you give me the part number please..
For model number GJSR2080T2WW
PartSelect logo
Hello Marc, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8768445. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Joe
August 13, 2019
Resubmitted with model number Washer doesn't drain. door switch works. correct volts from wall to pump leads. 11 ohms on pump. impeller spins and clear. in take and outflow lines are clear. some burning smell. humming. any idea, this being so electronic, where to read fault codes?
For model number WJSE4150B2WW
PartSelect logo
Hello Joe, thank you for writing. We have information for GE fault codes at the following link: https://www.partselect.com/JustForFun/GE-Appliance-Fault-Codes.aspx. When testing the Drain Pump with a multi meter, it should read at about 16 ohms, and 120 volts to be working correctly. You may have a faulty Drain Pump. This part number PS8768445 is the correct replacement for your model. I hope this helps and good luck with your repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Gary
October 18, 2017
Is this the correct pump for my appliance?
For model number WPSE4200A0WW
PartSelect logo
Hi Gary, Thank you for your question. This is the correct part for your model information. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Lisa
November 21, 2017
What color goes on what side when putting on the pump. Plugging it back up? On the top of those plugs how are they arranged also they are both yellow?
For model number WBSR3140D5WW
PartSelect logo
Hi Lisa, Thank you for the question. I suggest watching the video on how to install this part,you should find it helpful. Good luck with the repair! https://www.youtube.com/watch?v=L3V8a6NCxns

3 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8768445
Manufacturer Part Number: WH23X10030
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
52120TAWB
Washer
General Electric
56021A0WW
Washer
General Electric
56031A0WW
Washer
General Electric
56041A0WW
Washer
General Electric
56051A0WW
Washer
General Electric
56121T2WW
Washer
General Electric
56121T3WW
Washer
General Electric
56121T4WW
Washer
General Electric
56121T5WW
Washer
General Electric
56121T8WW
Washer
General Electric
56121TAWW
Washer
General Electric
56121TBWW
Washer
General Electric
56200T2WB
Washer
General Electric
56200T3WB
Washer
General Electric
56200T5WB
Washer
General Electric
56220T6WW
Washer
General Electric
56220T8WW
Washer
General Electric
56220TAWW
Washer
General Electric
56220TBWW
Washer
General Electric
56221B0WW
Washer
General Electric
56221B1WW
Washer
General Electric
56221B2WW
Washer
General Electric
56221B3WW
Washer
General Electric
56221T6WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service