BOARD FAN SENSOR WB27T11463

Replaced both the blower fan assembly and the sensor circuit board. Easy repair. 30 minutes start to finish. Oven working again.......

My GE Wall oven was throwing a F96 error code, which indicates the upper cooling fan was not working. This fault disabled both halves of our dual oven wall unit. Because I was digging into the unit and that was a bit of work, I also bought the temperature sensor module as well to avoid having to pull the unit out twice if the fan was not the actual problem. Part select had the part(s) I needed and I did pay a few dollars to expedite the shipping. I ordered on a Sunday and the parts arrived on Tuesday. The wall oven is a heavy beast but with help from a friend it was removed and the rest of the repair was easy. You have to remove a number of panels on the back to get to the part, but it was not too hard to figure out. The old fan motor was indeed bad, I could feel it not spinning freely as it should. The new parts were a perfect fit and the repair was quickly accomplished. Hefting the beast back in the whole and connecting the wring up was all the rest of the work needed to complete the job. This job is easy if you have someone to help you lift the unit in and out. Other than that it just took a nut driver to disassemble/reassemble the oven and replace the parts. The cost of the parts were way cheaper than calling someone out on a service call. I have used PartsSelect on two repairs now and I will use them again should I have another problem. I really like that they confirm you are ordering the right part for your appliance, show you the detailed diagrams and there is also a community of users that comment on the the problems and parts. Thanks!

easy to install, fast shipping.

The part I received was great. It was exactly the same GE part that was in the system.