Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dennis B - November 9, 2023
Verified Purchase
Door handle
the part arrived and installed just fine ,however it has been in use for about a week now and has already broken, i am very disappointed in the quality of this part, thanks Dennis
November 15, 2023
Thank you for your review. We’re sorry to hear that happened, we will be in touch soon to help fix this issue.
★★★★★
★★★★★
Richard D - February 12, 2022
Verified Purchase
Exactly what I needed.
The part and the instructions where great. Made my repair easy and only took my wife and I thirty minutes to fix our microwave We highly recommend partselect to our friends
★★★★★
★★★★★
Josh M - October 16, 2021
Verified Purchase
Excellent
Shipping was fast and part was high quality! Thank you!
★★★★★
★★★★★
John F - September 18, 2021
Verified Purchase
Just like original
Same as original
★★★★★
★★★★★
Deborah H - September 12, 2021
Verified Purchase
Exact replacement
The part was received in great condition. Have no qualms on this company.However, very disappointed that it was all plastic, when it was described as metal ( it was plastic wrapped in metal foil) I know I will be replacing it again, unfortunately. $80 for plastic. - wish GE took greater pride in their products, and actually built a microwave that was worth $1300!
★★★★★
★★★★★
Michael R - August 6, 2021
Verified Purchase
Works fine but still plastic
Exact match with oem part. Uses plastic in parts where screws engage. Likely to fail again in future.
★★★★★
★★★★★
Robert J - August 5, 2021
Verified Purchase
replacing micro door handle
the part was fine only i dropped the door and bent the stainless steel outer covering that part to replace was 179
★★★★★
★★★★★
Jorge R - December 22, 2020
Verified Purchase
Saved
The part that you sent was awesome. Had a friend install and took 10 minutes
★★★★★
★★★★★
Mike B - November 22, 2020
Verified Purchase
Exact perfect fit
It was exactly the same and was not difficult to install.
★★★★★
★★★★★
Ekatia S - November 16, 2020
Verified Purchase
Arrived well packed
The part arrived faster than expected. It was exactly what the picture shows. I wish The instructions to replace was included.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door handle broken
1. Removed the cowling/deflector above the door. Push to the left then lift off. 2. Lift the door off and lay it face down. 3. With a screwdriver pry off the retainer ring around the outside edge of the glass. It is about 2.5 inches wide. 4. Remove the 4 set screws in each corner. Use a magnetic tip screwdriver as the s
... Read morecrews are small. 5. With a screwdriver pry off the inner retaining ring. 6. You will then be able access the two screws holding on the old handle and replace with the new. Reassamble in reverse order.
Read less
James from GRAIN VALLEY, MO
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
13 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
22 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shailendra
January 19, 2018
The handle is broken, is diagram position 1801 the integrated part for the door or does the door come with the handle and how do I install it?
For model number JVM3162RJ1SS
Hello Shailendra,
Thanks for your question. The door handle assembled with the door is part number PS11762747 whereas the part number of the handle on its own is part number PS8754188. Before replacing the door handle, unplug the microwave from the power source. Use a screwdriver and plastic putty knife to remove the lining from the inside of the door. Remove retaining clips holding the frame in place to access the screws for the door. Remove the screws and set them aside. Remove the inside door panel, then remove the door handle and install the new handle. Use the screws to secure the door. Reinstall the inside door panel and back lining. We hope this helps!
Does this part fit my microwave with the model PVM9179SF2SS?
For model number PVM9179SF2SS
Hello MaryAnn, thank you for contacting us. Yes, that is the correct handle for your model. Good luck with the repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ross
October 22, 2017
Ordered door handle removed out covering (choke) on inside of door but still do not have access to the phillips head screws holding the door handle on, how do i proceed from here ?
For model number PVM9179SF1SS
Hi Ross,
Thank you for your question. It is likely that you would also have to remove the choke to be able to see the screws that are just behind the front panel of your microwave door. You would also remove that the same way you removed your choke cover, with a putty knife and gently prying it away from the front of the door. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Teresa
November 2, 2017
I took off the skinny, plastic piece that has small clips holding it in, unfortunately the screws aren't still in my view. Do i need to take another layer off to expose the screws?
Hi Teresa,
Thank you for your question. Yes you would. You would have to gently pry away your middle choke piece as well to reveal your screws. You should be able to do that the same way that you pulled off your choke cover piece. I hope this helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Sara
October 5, 2017
What is the finish/color of this handle?
For model number PVM9179SF1SS
Hi Sara,
Thank you for your question. This part is Stainless Steel. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Alex
April 12, 2018
Hello - double checking fitment on jvm3160rf2ss. Can't seem to find confirmation on the handle for that model number. This looks about right, however if this is not correct, could you please provide information on what is the correct replacement handle? Thank you.
For model number JVM3160RF2SS
Hello Alex, thank you for your question. The door handle for your appliance model # jvm3160rf2ss is part number WB15X10278. This is the recommended handle for your unit, per the manufacturer. The other handle will not fit the unit. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stacy
February 6, 2019
Does this stainless steel door handle come with the screws attached to the top and bottom for easy change over?
For model number JNM3163RJ1SS
Hello Stacy, Thank you for contacting us. After reviewing the model number I show that the installation hardware is PS1017680 and needs to be ordered separately from the door. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
December 11, 2019
Ordered door handle removed out covering (choke) on inside of door but still do not have access to the phillips head screws holding the door handle on, how do i proceed from here ?For model number pvm9179sf2ss the part# is wb15x21101
For model number PVM9179SF2SS
Hello Bill, thank you for your question. The inner frame may need to be removed. There should be one screw on either side that holds that onto the outer door frame. With that removed the handle screws should be visible. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
February 10, 2018
My door handle broke off. Where are instructions to get at the screws from the back?
For model number PSA9120SF2SS
Hello Frank, Thanks for your question. Before replacing the door handle, unplug the microwave from the power source. Use a screwdriver and plastic putty knife to remove the lining from the inside of the door. Remove retaining clips holding the frame in place to access the screws for the door. Remove the screws and set them aside. Remove the inside door panel, then remove the door handle and install the new handle. Use the screws to secure the door. Reinstall the inside door panel and back lining. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Margie
February 11, 2018
Does this handle fit my microwave?
For model number PSA9120SF1SS
Hello Margie,
Thanks for your question. Yes, this part is compatible with your model.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
