GE/GE_Thumb/00139262i01.gif
See part 416 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Handle Support - White

★★★★★
★★★★★
14 Reviews
$ 42.50   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS8753758
Manufacturer Part Number WB06X10943
Manufactured by GE
Product Description

Handle Support - White Specifications

This part is a replacement handle support for your microwave door. The handle support is the part that connects the handle to the microwave door. Occasionally the handle supports can become loose and damaged, and need to be replaced. This part is white in color and is sold individually. This is an OEM part sourced directly from the manufacturer.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB06X10943 replaces these:
AP5790057
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

10 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Darrin
    November 26, 2017
    How do i remove the doors inside panel to get to the handles hardware, i'm trying to replace one of the door supports.
    For model number JVM3160DF2WW
    Hi Darrin, Thank you for your inquiry. In order to remove the door lining so you can gain access to the screws holding the door handle in place, you will need to use a putty knife. Start at one side along the inside of the lining around the window edge and gently put the putty knife between the door lining and the door to release the tabs holding it place. The side where the door is hinged, you will need to pry the lining lose from the back side. Once this is complete you can remove the inner lining. With the lining removed you should see the screws holding the door in place. Sometimes the door handle may be held with 4 screws and you may not see the other 2 screws. If you remove the 2 screws and the handle does not come off you will need to remove the inner door frame with a putty knife using the same procedure as with the door lining so you can release the other screws. I hope this helps. Thank you and have a great day!

    10 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Kim
    February 2, 2018
    I need to replace the plastic handle that broke. It looks like i need part# : Ps8753758, but when i click on this, there are many part#'s listed for various parts of the handle. Does this part# include all of them?
    For model number JVM3160DF2WW
    Hello Kim, Thank you for your inquiry. This part number is the supports which the handle attaches to on the door, you would need two. Part# PS8754173 is the handle itself, and part# PS8753375 is the screws which attach the handle to the supports and door. Hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Christine
    March 1, 2019
    I need two of the 416 parts for the handle replacement. When i order this for $33, does it come in a set of 2 or do i need to order 2?
    For model number JVM3160DF2WW
    Hi Christine, Thank you for your question. This part is sold individually. You will need to order 2 of them. I hope this helps. Thank you and have a great day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Kevin
    April 15, 2019
    Does the handle supports come in pairs?
    For model number JVM3160DF2WW
    Hello Kevin, Thank you for the question. According to the description. This part is sold individually. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Bob
    April 24, 2019
    Does door handle come with part 416 that attach door handle to the door
    For model number JVM3160DF1WW
    Hello Bob, Thank you for the question. The support Part #: PS8753758 is sold separate from the handle Part #: PS8754174. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Bill
    July 9, 2019
    Handle supports broke and have ordered 2. What are the steps to access screws from the inside of the door? Seems like a panel has to be removed. Please advise. Thanks.
    For model number JVM3160DF1WW
    Hello Bill, thank you for your question. The inner door frame has a seam around it where it snaps into the door. Using a putty knife slowly go around the inner door panel frame to release the tabs that hold it into place. The inner frame will pull away from the door and the screws for the handle will be accessible. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Brian
    October 5, 2017
    Is this for both brackets or per bracket?
    Hi Brian, Thank you for the question. The Handle Supports are sold individually. Good luck with the repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Kevin
    February 8, 2019
    The handle broke off. Don’t have any more. I know I need the handle. Do the handle supports come as a pair or do i have to order 2 of them. Please advise.
    For model number Jvm3160df3ww
    Hello Kevin, Thank you for the question. This part is white in color and is sold individually.Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Bill
    September 5, 2017
    Handle brackets on GE microwave broke. I was able to remove plastic bezel. Cannot see how to remove inner bracket to get to screws.
    For model number JNM3161DF2WW
    Hi Bill, Thank you for your inquiry. This is the correct part for your appliance. I believe that there will be screws that are holding that inner bracket in. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Tim
    March 17, 2018
    I read your instructions on separating the door from the door panel using a putty knife to get to the screw to replace the handle, but once I replace the handle, does the door and door panel just snap back together?
    For model number JVM3160DF2WW
    Hello Tim, Thanks for your question. We would actually advise having a licensed technician install this part, as the microwave door contains shielding components that must be tested for any leaks in the microwave shield prior to safely using the microwave. That said, the door and door panel would just snap together. I hope this helps.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.0 / 5.0, 2 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Tray and Handle were broken.
        Removed the outer frame on the inside of the door. Then I removed the metal frame to get to the handle screws. Removed the handle screws and replaced the broken handle with the new one. Then put everything else back together. For the tray. I just put the new one on the rotating wheel.
        • Cheryl from AURORA, IL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        4 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Part of door handle broke
        Deliver of part took the longest. Part order on 9/8/20 and delivered on 9/19/20. Remove the door from microwave. Then remove door part took about 30 minute, was difficult.
        Part fit perfect. Put everthing back together was easy.
        • Tuan from ALBUQUERQUE, NM
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Screw drivers
        • Parts Used:
          WB06X10943
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          14 Reviews
          4.0
          Filter By Rating:
          • 5 Stars
            8
          • 4 Stars
            2
          • 3 Stars
            1
          • 2 Stars
            2
          • 1 Star
            1
          Sort by:
          Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS8753758
          Manufacturer Part Number: WB06X10943
          Brand
          Model Number
          Description
          General Electric
          JNM3161DF1WW
          Microwave
          General Electric
          JNM3161DF2WW
          Microwave - MICROWAVE
          General Electric
          JNM3161DF3WW
          Microwave - GE Microwave Model JNM3161DF3WW Parts
          General Electric
          JNM3161DF4WW
          General Electric
          JVM3160DF1WW
          Microwave
          General Electric
          JVM3160DF2WW
          Microwave - MICROWAVE/HOOD COMBO
          General Electric
          JVM3160DF3WW
          Range - General Electric Microwave
          General Electric
          JVM3160DF4WW
          Microwave
          General Electric
          JVM3160DF5WW
          Microwave

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service