Compressor Start Device and Capacitor Specifications
This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Amana Refrigerator Compressor Start Device and Capacitor
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Fridge too warm | Fridge and Freezer are too warm | Freezer section too warm
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ronald S - November 24, 2023
Verified Purchase
My Maytag refrigerator fan and light work except don’t here the compressor kicks in and run.
We ordered the compressor relay with capacitor replaced the parts. Plug it in everything runs good back to normal. Save tons of money.
★★★★★
★★★★★
Carl T - May 11, 2023
Verified Purchase
Rescued My Frig From the Appliance Graveyard
The part worked great. Partselect nailed the part for the symptoms, provided a great product, installed quick and easy, and the video was super helpful.
★★★★★
★★★★★
Jessica R - October 5, 2022
Verified Purchase
Quick replacement
Part came in quick wad exactly what was needed .
★★★★★
★★★★★
Brad B - August 26, 2022
Verified Purchase
Didn’t work
It didn’t work.
October 25, 2022
Thank you for your review. We're sorry to hear that happened, we will be in touch soon to help fix this issue.
★★★★★
★★★★★
C D B - April 30, 2022
Verified Purchase
Worked as expected, but not real easy to replace due to location of part
When I received the part I was worried it wouldn't work, as the start relay was configured differently than the one that came out of the fridge. But, I figured all I could do was try & if i failed then I could always call a repair person. When the fridge stopped working, I went to YTube and watched several videos on what could be wrong. Went ahead & removed the compressor start device and knew right away it was broken. Received the new one & put it in. Because of where the part was located and the cramped quarters in the fridge, it did take some effort to put the new one in. The most difficult part was putting the wire that holds the part in place back. I finally installed it backwards, hooked it on the top first then pushed the bottom portion into place. The fridge started up after I plugged it back in & It got cold within 24 hours.. AS I write this, it turned out this was part 1 of fixing this fridge. It did get cold but it actually got too cold. I ended up also replacing the damper, and now the fridge works great. Finally, the hardest part for me on this repair is: I am 66 yrs old woman & have a bad knee, getting down on the floor, I cushioned myself with an exercise mat, was not comfortable, but I did it and saved myself some $$$ by doing it myself. PartSelect was quick in getting both of the parts I needed out to me in a timely manner.
★★★★★
★★★★★
Linda T - March 6, 2022
Verified Purchase
Installed the part, but frig is still not working.
The part I'm sure is fine. And you delivered it in a timely fashion.
★★★★★
★★★★★
ROBERT T - September 12, 2021
Verified Purchase
Part functions but..
The part was simple to install up to a point, it's geometry was different from the original making the retention clip worthless. I'm holding it in place with a series of zip ties. Given the high heat environment and the vibration I'm not sure I have a long term solution. At least I'll know where to look first if I once again wake up to a warm fridge and melted ice cream.
★★★★★
★★★★★
Andy R - November 3, 2020
Verified Purchase
Easy repair
The instructional video made the repair quick & without difficulty. Unfortunately this didn’t fix my issue. My refrigerator & freezer still doesn’t get cold.
★★★★★
★★★★★
Brian D - November 2, 2020
Verified Purchase
Easy repair
Thought we were going to have to buy a new refrigerator. Watched some You Tube videos on diagnosing issues. It led me to suspect the starter and capacitor so I ordered from Parts Select and the refrigerator works great!
★★★★★
★★★★★
Sheila D - October 8, 2020
Verified Purchase
Fantastic!
Our repair was successful. We appreciated the “how to” video.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 21 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Refrigerator compressor not run
Replaced the relay and capacitor it runs.
ronald from San Diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Power surge cause compressor to stop functioning
Followed the YouTube video linked to the Compressor Start Device and Capacitor I purchased. The repair was just as easy as the technician in the video said it would be. Removed the back panel, remove the clamp, worked the Compressor Start Device and Capacitor off the electrical prongs and replace it with the new one. After I reassemble
... Read more the refrigerator, it was fully operational. Very easy to do and only required a few tools.
Read less
Alvin from ORANGE PARK, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both compartments of the refrigerator were warm.
We came home from a long vacation to discover a warm refrigerator with its contents in various stages of decay.
Turning the freezer thermostat to its warmest setting then back to cold generated clicks, and after a few tries the compressor started and cooled the refrigerator to its normal cold temperatures. But… later the co
... Read morempressor again failed to start, and everything warmed back up again. With persistence and turning the thermostat up and down several times a day, we could keep the fridge cold.
It was time to order parts. We needed a new start relay and capacitor for the compressor. For our Amana ARB2214CW a start relay (WP12555902) and capacitor (WP65889-4) were listed on the first page of the Partselect parts list for my refrigerator. I ordered them, received them, removed the old capacitor and start relay (which rattled when shaken). and prepared to install my new parts. The new start relay did not match the old. The old start relay fit my wiring which had a single plug with two small female spade connectors in the plug. The new start relay required wiring with two separate female spade connectors; one the normal size and one larger. Phone calls to Partselect and to Westinghouse shed no light on the discrepancy. On the second page of the Partselect parts list was a combination of a start relay and a capacitor (W10613606) that matched my electrical connector. I could see the connection in the photograph. I ordered it and it fit. Easy peazy. That fixed the compressor start problem. Every time the freezer thermostat clicked on, the compressor started. Success.
But… from our troubleshooting we now had a thermometer the freezer, and it was obvious that the temperature difference between the cold point where the thermostat turned the compressor off and the warm point where the thermostat restarted the compressor was much too wide. In addition, the knob was hard to turn and was sticky as it turned. Oiling it fixed the sticky knob problem but not the wide temperature difference problem. I ordered a new freezer thermostat (WP67003000), received it, installed it, and all is now fine with my refrigerator. The new thermostat was physically a little different from the original, but it fit and worked.
I returned the first compressor start relay and capacitor and received a refund including the shipping charge.
Read less
Bill from KINGSPORT, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator went out during blackout.
Installed the part, fan turned on, lights on, however, the freezer did not get cold and refrigerator is not working at all. Need advice!
June from ZUNI, NM
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Compressor Start Device and Capacitor
Followed Youtube video from Free Repair Help. Only problem was getting down low enough to see the pins on the Compressor to plug the replacement Compressor Start Device and Capacitor-could not replace the old clip to hold the unit to the Compressor like the old unit had. At 77 I just have a problem bending over.
JOHN from LOVELAND, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not freezing or keeping thing cold in fridge
Once I got the right part the repair was quick and easy. All I had to do is get the old part off with a screwdriver and curved needle nose pliers and the old part came right off. The new part went in just as easy. Quick and easy. Less than 15 minutes.
BRUCE from AMMON, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fridge and freezer quit working
noticed the fridge and frezzer were not cold one day.i got on google and typed in the problem and found out the the relay goes bad rather often. was an easy fix. found the parts here on partselect and recieved in with in 2 days of ordering. pulled the old part out put new part in and plugged fridge in and was back up and running with in m
... Read moreinutes..thank you partselect....
Read less
mike from galt, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
11 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator stopped cooling
Problem: My Maytag side by side door refrigerator just stopped cooling and has to discard all frozen items after I discovered being away for 3 days. First, I went to my computer and read some of the repair stories at Part Select “Need help with your repair?” and installation video guide. 1. I ordered the Refrigerator Adaptive Defrost
... Read more Board (ADP) - followed the procedures how to disconnect and installed the new part. Unfortunately, it did not correct the problem and only warm is coming out. 2. I ordered the Defrost Heater Thermostat Assembly - removed the old and replaced with new assembly. Again, warm air coming out. Meanwhile, I kept on hearing “clicking sound every few second” not knowing where this coming from. Again, at Part Select, I read the story about it and I ordered the Run Capacitor and the Overload/Relay with Capacitor. Soon as I opened the parts and tried to match it from the part at the back of the refrigerator and to the part from the compressor, I have discovered that they are not in compatible with the original parts from my Maytag Refrigerator and cannot be installed. And so I contacted (Email) Part Select customer service (Jeanette) if I could return the unused parts and had provided me the “Return address and the Reference Number”. This time, I gave Jeanette the Maytag Model and Serial numbers and asked where I could find this on my refrigerator and make the necessary repair and came back with the diagram and located #4 to the compressor. Ordered the correct part# PS2004058. 3. Upon receipt of the part above, I was puzzled, in the plastic container are four parts, included a plastic cover. I have not given up, I removed the original part encased in white plastic container pulled straight off the compressor and examined it closely. Before detaching all the wiring, I also noted before disconnecting from wire harness and read the Diagram/Instruction Sheet provided. 4. From the four new parts provided, installed the Overload Terminal, bottom part on Compressor with one terminal to the Blue wire. Connected White Jumper to the old harness. Lastly, I plugged the PTC Start Device (two terminals) above the Overload Terminal on the Compressor with the proper wiring as I previously noted and installed the electrical cover. “Plugged in the refrigerator to the power outlet”. To test the result, I left a glass of water inside the freezer and a bottle of wine into the refrigerator. The result - I checked after 2 hours, the water was frozen and a cool wine. “Little frustration included here, as I am not an electrician.” But now, I could say, I fixed it, and very proud of this accomplishment. Thank You, PartSelect and to a great Customer Support! Safety Note: Always make sure to unplugged the refrigerator (power off) prior doing the necessary repairs. Rodolfo Julao/S. San Francisco, CA
Overload relay accessible from back, by compressor unit. Very easy to change out. Diagram from your site placed defrost thermostat in same area.It wasn't. Found another diagram, showed it in refrigerator light area, took that apart, not there. Yet another diagram showed it in the duct work area at back of refrigerator cabinet. Not there.
... Read more Finally removed back of freezer compartment, found thermistor and thermostat with the fins. Clipped wires, wired in parts, quick fix. Longest amount of time was spent finding the old parts to replace them. Actual replacement took less than 15 minutes. Refrigerator holding at 35 degrees set on 2 now, better than ever. Total cost, less than $120, doing iy ourselves....priceless.
Refrigerator was stored for about 2 years and we picked it up when the owner decided to move into an apartment and no longer needed to unit (lost home to foreclosure). Brought the unit home and it worked great for about 3 days. On the third day my wife noticed a slight electrical burning smell. I did also and quickly emptied the unit a
... Read morend hoped for the best. The unit did indeed stop working. I fancy myself a do it myselfer but I would normally not go near electricity but thought what the heck it was free if i ruin it I would give it away. After a little research i found Partselect and they had a great design and a few stories that sounded similar so i pulled the relay capacitor for the compressor and sure enough the unit showed burn marks where the unit had shorted out. Maybe a bug got in there or water, dirt but I ordered the part. I arrived in two days which was great. I installed the part and plug the unit in and crossed my fingers. Very happily the unit clicked on and has been running great ever since. thanks Partselect, while I may not be one of your big customers I will refer anyone with appliance issues to your site first.
Read less
chad from stockton, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
15 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
27 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bret
December 7, 2017
How do you test run start relay
Hi Bret,
Thank you for your question. You would test that part with a multi meter. The start relay should read any where between 10 - 100 ohms of resistance. Good luck with your repair.
20 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
August 26, 2017
Can this part be bad and the freezer still maintain a constant temp while the fridge is to warm? I have replaced the thermistor and the control damper and fridge still will not maintain a constant temp. When i unplug and plug it back in the fridge will cool back down for a short period of time. But its like when the temp rises and it calls for it to start cooling again it doesn't. Any help greatly appreciated.
For model number JFC2089HPR10
Hello Dave, thank you for contacting us. If the freezer is staying at its proper temp but the fridge is not, that could be the an issue with the evaporator fan or motor. That is what blows the cool air into the fridge. Hope this helps!
Fridge+freezer warm both fans running replaced capacitor and start device. Still compressor not kicking on
For model number mbf1956keb2
Hi Russ, Thank you for the question. I recommend replacing the Electronic Control Board,PartSelect Number PS11755733.The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem.Hope this helps!
Is there an internal fuse or power board -have power to frige but nothing works
For model number pbf1951hew
Hello Gary, Thank you for the question. There is no fuse or board, but I suggest testing the Compressor Start Device and Capacitor PartSelect Number PS8746522 with a multi meter. This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Donna Suchan
March 8, 2018
My refrigerator makes large ticking noises like a clock, then starts making loud popping sounds, the lights start to blink on the front and then goes out. The noise continues and then stops, the lights come back on the refrigerator returns to normal running. I have turned the ice maker off thinking that was maybe hanging up but it is not the problem. At first this happened once in awhile but now it does it somedays more than once a day.
For model number ME12568AEW
Hi Donna,
Thank you for your question. If your are hearing a ticking or clicking noise from your appliance, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the compressor start device and capacitor and the high voltage board. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chloe
August 1, 2018
I am not getting power to the compressor how can i test the run cap. And start relay? Where the cap plugs into the compressor it's got a little heat damage melted a little.
For model number MSD2652KGB
Hi Chloe, Thank you for your question. You would test those parts with a multi meter to determine whether or not they are working. When testing, if either part is not reading 0 ohms, that means they would have to be replaced. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
David
November 15, 2018
The power on the house was turned off when power came back on the refrigerator comes on, blows ,but doesn't cool lol what do i check first please
For model number Aff2534few11
Hello David, Thank you for the question. The first part to check would be the Thermistor, PartSelect Number PS2003772. You can test the Thermistor to see if it is defective.The resistance of the thermistor in the unit should be 2.7K ohms at 77 degrees.Hope this helps, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robert Merchinson
December 17, 2018
My refrigerator is not getting cold lsd
For model number Lsd2615heb
Hello Robert, thank you for your question. If the freezer is working but the fridge is getting too warm, you will want to check to see if the evaporator fan motor is working to push cold air to the fridge from the freezer, as well as the damper is opening and closing to allow more or less air in. You may also want to check that the coils behind the freezer wall are not frosting over, if they are you may need the defrost control board. If the freezer is also too warm and not cooling enough, the start device and capacitor on the compressor. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ronald
March 21, 2019
Frig, making groaning noises, when it is running! Just cleaned the compressor fan and back bottom section of frig! Front bottom section is next! The groaning is coming from inside of frig! Evap fan? Or something else? Any que?
For model number MF12568AEB
Hello Ronald, thank you for your question. If the noise is coming from inside the fridge when its running we would recommend checking the evaporator fan motor and blade first. If that isn't the issue you may want to check the damper assembly. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Colleen
August 5, 2019
I am looking for the capacitor relay combo for this model. Thanks
For model number 596.65932401
Hello Colleen, thank you for inquiring. This Compressor Start Device and Capacitor part number PS8746522 is the replacement you are looking for on your model. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
