This display module is also known as an oven control board. This part is the brain of your appliance. It monitors and displays the internal temperature of your range oven. The control board allows you to control the heating functions of the appliance. You can set the desired cooking temperature, select if you want the bake, broil, or warm function, and set a timer. This digital display will also function as a clock when the oven is not in use. Before you replace this part you should check it with a multi-meter to ensure it is faulty. Problems with the control board are often misdiagnosed. This replacement display module also included the filter.
Ask our experts a question about this part and we'll get back to you as soon as possible!
28 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
C
January 14, 2018
Range error 160 reset board by programming model and works then try next day error 160 have to reset breaker to reprogram board to model and works
For model number Hei7282u/03
Hi C, Thank you for the question. Error 160 means that the board is not configured to your oven. If resetting the board does not fix the issue then the board will need to be replaced. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
April 12, 2018
The display illumination does not light up no digital display, do i replace the display module?
For model number HD17282U
Hello Susan, thank you for your question. The Electronic Control Board 00653424 can be replaced by removing the back panel that is behind the control panel. We recommend you take a picture of the board and the wiring so that you know where they connect into the new board. The wires are then removed and the board taken out, then the new on installed in reverse order. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nate
December 18, 2017
The off button does not work. I can turn the oven on and the buttons on the right side of the clock/temperature display work. But, the buttons on the left side including "off" does not work. Should i replace the electronic control board?
For model number HDS7052U-01
Hello Nate, Thank you for your inquiry. The other issue could be with the control panel. You can test both parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Al
August 5, 2018
The oven and cook tops do not work. The clock is working. There is power to the unit.
For model number HES5062U
Hi Al,
Thank you for your question. If the oven and cooktop are not working, then the electronic control board may need to be replaced. You will to check the part with a multimeter to verify if it is working correctly. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brian
November 8, 2018
I can use the knob and the buttons to turn the oven on but the display is completely blank. I don’t have a multimeter to check the board. thoughts?
Hi Brian, thank you for your question. You would likely have to replace your board. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Adolfo
October 12, 2017
The control panel is off and a red flashing light is on all the time, the oven is not working at all. What is the red flashing light mean in the control panel?
For model number HEI7152U/01
Hi Adolfo,
Thank you for your inquiry. If you are getting a flashing red light from the control panel, then there was probably a power surge or the power going out. To reset the stove you will need to press the clear button and this should resolve the issue. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rusty
October 23, 2017
Yesterday I asked about my range not holding temp. You said the oven sensor, I have already changed the oven sensor. Do you have any other ideas or suggestions?
For model number HGS7052UC01
Hi Rusty, Thank you for the question.If your oven is not heating properly the most commonly problem is a faulty igniter.Hope this helps!
Was this helpful?
Thank you for voting!
Harold
December 12, 2017
The oven display became dim and is totally off. I just replaced the power control board in the back of the range but it did not fix the problem. Could it be the oven control board?How do I test it with a multi meter?
For model number HDI7282U/09
Hi Harold, Thank you for the question. Yes, I would recommend replacing the Electronic Control Board. You can test to see if power is getting to the board. If power is going to the board but the display is not on, then the board will need to be replaced. Hope this helps!
Was this helpful?
Thank you for voting!
John
November 23, 2019
Is this control board what I need to replace if the fan is running continuously and does not shut off or are there other options with this particular oven. Thanks, john
For model number Bosch HGS7258UC
Hello John, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with this information. Hope this helps!
Was this helpful?
Thank you for voting!
Alison
May 6, 2019
The control panel on my stove started flashing and beeping. The only way to stop it is to unplug it. When i replug it in, it is still doing the same thing. Its 14 years old, electric oven and gas stove top.
Hi Alison, thank you for your question. It sounds like you may need to replace that part then. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
