Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
November 9, 2019
Dishwasher repeatedly displays e 24 error code, drain pump, hose, filter are all perfectly clear, error occurs at beginning of dry cycle. Drain pump and control board were previously replaced under warranty. This problem has occurred intermittently over the years but now occurs every time. If i run the machine four times it will finally finish the cycle. I don't want to just throw parts at it, Bosch will not sell me a service manual so i can test it. I would appreciate advice.
For model number SHX68E15UC
Hello Peter, thank you for your question. The issue with the e24 is usually related to the drain, or drain hoses, or control board. Since the issue is persistent, we would recommend testing/replacing the sensors, PartSelect Number PS8727345 and PartSelect Number PS8727445. If those are tested/replaced and are not the issue, the drain pump or board may have failed again. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.