If your gas oven is not heating at all, or not heating properly the most commonly problem is a faulty igniter. The bake igniter is used in gas overs and ranges, the element in the igniter gets hot enough to ignite the gas that lights the oven burner. This bake igniter assembly features a wire harness and push-on wire terminal ends for easy installation. Handle this replacement part with care, do not touch the element inside the igniter as it is very fragile. Before you replace this part make sure you have unplugged your oven and shutoff the gas supply.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Little to no heat when baking | Gas igniter glows | but will not light
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Anne W - December 1, 2023
Verified Purchase
Simple fix
This was very easy to replace on my Bosch oven!
★★★★★
★★★★★
Nicholas K - July 2, 2023
Verified Purchase
Saved a lot of money!!!
The part was exactly what I needed and the stove was pushing 15 years old. What a find!! Installed it myself with no prior experience.
★★★★★
★★★★★
Wayne C - September 13, 2022
Verified Purchase
Replaced oven igniter
Fast delivery, easy to understand instructions, great product and service!
★★★★★
★★★★★
David K - April 25, 2022
Verified Purchase
Money saving repair
The OEM replacement igniter works perfectly. I saved an expensive service call that would have taken days to schedule and possibly a return trip with the proper part once he diagnosed the problem.
★★★★★
★★★★★
Barry G - February 2, 2019
Verified Purchase
replaced this myself
Easy repair IF you have at least some repair skills. A dozen or so small screws or bolts. You have to pull stove out and remove oven door. Somewhat of a fight to get door rehung back on stove. That was the hardest part of repair. Instructions on YouTube get you close but not perfect for every model. You must use some mechanical common sense. Part works well and as advertised.
★★★★★
★★★★★
Andy P - October 26, 2018
Verified Purchase
Solved my oven problem
The part was exactly what I needed and was fairly easy to install (In my case , had to remove cover plate at rear of oven). Local repair service wanted 3 times the cost of part to repair oven!
★★★★★
★★★★★
Ronald M - April 11, 2018
Verified Purchase
Ignighter replacement
Part delivered as scheduled. Installation was easy. Took about 10 -15 minutes. I removed the heat shield. Removed the old igniter by removing 2 small bolts. Threaded the two wire leads through the opening to the back of the stove. connected the press-on wire connectors. Tested the oven and replaced the heat shield.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dragana
July 8, 2021
Will this oven igniter (for bottom of oven) work in a hgs7282uc/02 ? Thank you - d.
For model number HGS7282UC/02
Hello Dragana, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8722793. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
George
October 5, 2017
A friend of mine has a new ignitor which is for a Thermador brand. He says it will work in my oven. It looks the same but i am just not sure
For model number HGS436UC-01
Hi George,
Thank you for your question. Unfortunately I would not be able to tell you that other igniter would work for your appliance. I do know though that this igniter is the correct one for your appliance and would definitely work. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ronald
December 4, 2019
Oven will turn on but after 1 or 2 minutes gas stops and oven turns off regardless of temperature setting.
For model number prg366eg/06
Hello Ronald and thanks for writing.
It sounds like a faulty bake ignitor check and replace it if needed. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Matthew
December 3, 2018
How to install
For model number Bake igniter thermador PRl667 over
Hello Matthew, Thank you for the question. This bake igniter assembly features a wire harness and push-on wire terminal ends for easy installation. You just need to pull the old ones off and push the new ones in its place. The igniter is held in by a screw on the bracket. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Darcy
September 29, 2021
What range ignitor will work for this model? Thank you.
For model number HBL5351UC/04
Hello Darcy, thank you for your question. Your model HBL5351UC/04 is an electric Stover and has no igniter. Could you please verify the number you provided us with? If it is correct, I recommend
contacting the manufacturer and seeing if they could provide you with a part number, and then you are
always welcome to check back to see if we carry the part. We hope this helps.
Was this helpful?
Thank you for voting!
Ray
December 17, 2022
My gas igniter glows but the oven will not open the valve. is there a Thermocouple for this stove? I can't locate one?
For model number HGS7052UC/08
Hello Ray, thank you for contacting us. The most probable cause of the issue is a fault in igniters, part number PS8722793, and part number PS8722791. You can test the igniter with a multimeter for functionality. If this does not help, the issue is probably related to the regulator, part number PS8726046. It limits the incoming gas pressure to a safe and constant level for the burners. There is a temperature sensor in the oven, part number PS8728515. We would recommend testing it for continuity. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Will this burner igniter also work for the broiler? I'm not able to find a broiler-specific item.
For model number PRG304GH
Hi Todd, thank you for contacting us. The bake igniter, part number PS8722793, is only for the oven. The spark electrode, part number PS8728077, ignites the surface burners of your range. We hope this helps!
Before I order this part will it work with the model I listed, Same with the broiler igniter? Model HGS445UC/02
For model number HGS445UC/02
Hi Nancy, Thank you for the question. The Bake Igniter is listed as PartSelect #: PS8722793 and the Broil Igniter is PartSelect #: PS8722791. We hope this helps!