This door hinge is designed for use with dryers. The door hinge supports the door and allows the door to swing open and closed with ease. The hinge is made of metal, and it is easy to install, you will need a screwdriver. While holding the door, remove the four screws found on the cover plate of the door, this will allow you to remove the door from your appliance and access the hinge. Once the door is removed make sure you save the plastic bushings from the original hinge. You will then remove the two larger screws on the hinge, then slide the hinge straight up, and pull it out of the appliance. Place the plastic bushings on the new hinge, attach the hinge to the dryer, and reinstall the door.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Dryer.
This part works with the following products:
Bosch.
Part# 00491647 replaces these:
AP3765653, 491647
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Katharina
January 8, 2018
Can you tell me the dimensions of this part?
For model number WTMC3521UC
Hi Katharina, Thank you for the question. According to the 1 Inch grid, the hinge is approximately 9" long. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
December 10, 2018
Where do i find the model number
Hello Greg, Thank you for the question. Here is a link to help locate the model number on a dryer. Hope this helps!
https://www.partselect.com/Model-Number-Locator+5+repair.htm
Was this helpful?
Thank you for voting!
Joseph
July 24, 2019
The door of this dryer fell off. The hinges broke. The dryer wa bought in 2007. Is there a replacement without buying a new door. The door is fine, the hinge just broke.Thanks.
joe
For model number wtmc352suc
Hello Joseph, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8722560. Hope this helps!
Hi the hinge door il broken for my dryer (serial no.857090084477009486) is it fit for my model?
For model number WTMC3321CN
Hello Annie, thank you for your question. Yes, the door hinge PartSelect Number: PS8722560 is the compatible replacement for your unit. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 4 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top of door hinge arm broke.
Remove 4 screws on plastic cover of hinge that connects to the door. An assistant will come in handy at this point to hold the door. Then remove 2 screws holding hinge. Push up on hinge and pull out to remove hinge bracket. Hinge pins has plastic covers that need to be in place before attaching to the door. A small amount of vaseline will hold them in place.
Philip from MOCKSVILLE, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top part of door hinge broke
For this dryer a ratcheting screwdriver set was a must. Follow the directions from previous posts and you're done. Easy 5 minutes!
Mark from SHERIDAN, MT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The pot metal door hinge broke so I ordered on from this company.
The delivery date blew past and at day 11 of waiting, I fabricated a new hinge in my shop out of steel. The crappy pot metal replacement showed up two days later=13 days late. Now i have this $40 piece of pot metal garbage laying around that I'll never use because I made a hinge out of steel LIKE THE FACTORY SHOULD HAVE DONE IN THE FIRST PLACE. You people could have put the part in a $7 mailer envelope from the post office instead of shipping with the worst delivery agent in the free world (FedX). I hope I never need anything from your store again.
David from FLINTVILLE, TN
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door hinge broke
Removed old hinge and replaced with new.... Door works great! Thanks
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout