( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Detergent and Rinse Aid Dispenser 00490467

 Fits your SGS43A12GB!
★★★★★
★★★★★
3 Reviews

Rated by 3 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 148.09
  Special Order
 Fits your SGS43A12GB!
PartSelect Number PS8722285
Manufacturer Part Number 00490467
Manufactured by Bosch for Bosch, Gaggenau, Thermador, Kenmore
Product Description

Detergent and Rinse Aid Dispenser Specifications

This detergent and rinse aid dispenser is an important part in your dishwasher. It is located on the inside of the door and it holds and releases the detergent during the wash cycle of your dishwasher. The cover of the dispenser has a latch mechanism which is controlled by the electronic board or the timer. The latch releases to open and dispense the detergent at the proper time during the cycle. Overtime the mechanism might wear out, or the latch might break. If your appliance will not dispense detergent you will need to check this part. Make sure the part it free of debris, and that the hinge can move freely. If there is nothing from preventing this latch from releasing and the dispenser door from opening, you may need to replace the dispenser.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure
This part works with the following products:
Dishwasher.
Part# 00490467 replaces these:
AP3844311, 00265837, 00416858, 00490472, 265837, 490467, 490472
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Door on the old rinse additive would not stay closed.
Ordered the complete soap /rinse additive unit.nturn power off. Take the peripherical screws to remove the front of the door. Slide the door down and off. Unplug wires 2 places. Use a screwdrive to pry the tabs allowing the unit to come out

Important. Add a little Vaseline to the seal on the new part. Press it in until the tabs engage. Reconnect wiring and replace door front. Turn power on Job complete.
  • Bob from COOKEVILLE, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
detergent dispenser on Bosch dishwasher was not staying closed
My husband spent minimal time and maybe just screwdriver for repair of replacement part.
Your company was great to work with.
Thank you!
  • RAYMOND from WOODHAVEN, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring assembly on detergent and rinse aid dispenser broke so the sliding lid would not operate
Here are the steps you need to take to do the job properly:

1. turn off electrical circuit breaker to the dishwasher
2. remove 8 total hex screws (3 on each side and 2 at the top) of the inside door panel. The door panel will slide off so be careful and it happens pretty quickly when the last hex screw is removed.
3. unplug the wiring harness to the detergent/rinse aid dispenser
4. you need to use a flat head screw driver to lift the metal flanges on the top and bottom of the detergent/rinse aid dispenser.
5. the unit will pop out toward the inside of the dishwasher
6. insert the new detergent rinse/aid dispenser and very important all metal flanges are pulled back over the plastic edge (top and bottom) of the dispenser unit. The screw driver needs to be used to assist in pushing the dispenser unit as tight to the frame of the door to ensure the metal flanges grab hold and lock in.
7. re-attach the wiring harness
8. re-install the dishwasher door with 8 hex screws. Doing this step alone is challenging as the door frame will want to keep going up to close. I used a small foot stool and placed it inside the dishwasher front area on top of the inside metal door area so the door would stay open roughly half way. I then used my knees to prop up the outer door cover while i got 2 screws started then was able to easily complete the job.
9. run the dishwasher with a detergent packet loaded into your new dispenser. I checked for 15-20 minutes during initially running to insure no issues or leaks.
10. One last note - my Bosch dishwasher had a custom wood door installed to the outer panel to blend in with our kitchen cabinets. The door itself was much heavier as a result. Some of you may not experience the slight difficulty i noted above in step 8. Good luck.
  • Steven from SUWANEE, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
15 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

11 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
March 12, 2019
The door to the rinse agent will no longer latch closed. Is there a door replacement or must i replace the whole detergent/rinse agent component?Thanks.
PartSelect logo
Hello Wayne, thank you for your question. The Dispenser Lid is sold separately as part PS8697157.

20 people found this helpful.

Was this helpful?
Thank you for voting!
Jennifer
January 28, 2019
My Bosch dishwasher goes through a lot of rinse aid. It seems like it is either a problem with the gasket inside the dispenser or it also seems that the door for the rinse aid does not close tightly. Can i just replace the door on the rinse aid dispenser or do i need to replace the entire soap/rinse aid dispenser?
For model number SHV46CI3UC/30
PartSelect logo
Hello Jennifer, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8697157 for the rise aid lid. Thank you for your inquiry, good luck with this repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
July 30, 2019
My dishwasher is one of the above models. This looks like the part that I require. Is it?
For model number Siemens Model SL34A, SL84A SL95A
PartSelect logo
Hi Tom, Thank you for your question. To verify that we provide you with the correct part information, we would require the model number from the dishwasher. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Model-Number-Locator+4+repair.htm. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Gerrit
January 9, 2020
Can I get just the rinse aid door for the Kenmore elite dishwasher? If so what is the part number?
For model number 63016309404
PartSelect logo
Hello Gerrit, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8697157. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Ruth
November 23, 2021
I NEED THE COVER FOR THE SOAP DISPENSER. DO I NEED TO BUY THE WHOLE UNIT OR JUST THE LID.
For model number SHU3322UC/12
PartSelect logo
Hello Ruth, Thank you for the question. Very sorry, the Lid is only sold as part of the Detergent and Rinse Aid Dispenser, it is not sold on its own. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
John & Leilani
January 17, 2022
When Rinse Aid is added and door is closed, Rinse Aid leaks from between door inner panel and Rinse Aid Dispenser. Can this be solved with a cover replacement or does entire detergent / rinse aid dispenser need replacing? (Detergent dispenses as needed on time.)
For model number SHX68T55UC/02
PartSelect logo
Hello John & Leilani, Thank you for your inquiry. We would recommend the lid part# PS8727395, or the seal-part# PS8730291. Good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
Tom
August 7, 2019
Will this item work for this model?
For model number SL84A302UC/21 FD850400093
PartSelect logo
Hello Tom, thank you for your question. The dispenser for your unit is actually PartSelect Number: PS8722047. Please enter the part number into the site for current price and availability. Good luck with your repair!

Was this helpful?
Thank you for voting!
Barbara
September 16, 2019
What part should i order to replace the seal on the rinse agent dispenser. It has deteriorated.
For model number Shu43c
PartSelect logo
Hello Barbara, thank you for your question. The rinse aid dispenser cap is Part Number: PS8697159. I hope this helps!

Was this helpful?
Thank you for voting!
Don
June 4, 2019
The spring that opens the door, is it sold separately? Or do i have to buy the whole assembly.
For model number 00490467
PartSelect logo
Hello Don, thank you for writing. We would be happy to look into this, but we will need the model number for your appliance to do so. We look forward to hearing back from you.

Was this helpful?
Thank you for voting!
Monica
June 13, 2019
My dishwasher keeps draining and won't continue on to fill no matter what setting i use. I had recently cleaned the drain and ran thru a cycle empty. Has not started normally since.
PartSelect logo
Hello Monica, thank you for inquiring. The issue may be with either the Water Inlet Valve or the Pressure Switch. We will need the model number for the dishwasher to locate the correct replacements.

Was this helpful?
Thank you for voting!
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8722285
Manufacturer Part Number: 00490467
Brand
Model Number
Description
Kenmore
63016302400
Dishwasher
Kenmore
63016302401
Dishwasher
Kenmore
63016302402
Dishwasher
Kenmore
63016302403
Dishwasher
Kenmore
63016302404
Dishwasher
Kenmore
63016302405
Dishwasher
Kenmore
63016302406
Dishwasher
Kenmore
63016303400
Dishwasher
Kenmore
63016303401
Dishwasher
Kenmore
63016303402
Dishwasher
Kenmore
63016303403
Dishwasher
Kenmore
63016303404
Dishwasher
Kenmore
63016303405
Dishwasher
Kenmore
63016303406
Dishwasher
Kenmore
63016304400
Dishwasher
Kenmore
63016304401
Dishwasher
Kenmore
63016304402
Dishwasher
Kenmore
63016304403
Dishwasher
Kenmore
63016304404
Dishwasher
Kenmore
63016304405
Dishwasher
Kenmore
63016304406
Dishwasher
Kenmore
63016309400
Dishwasher
Kenmore
63016309401
Dishwasher
Kenmore
63016309402
Dishwasher
Kenmore
63016309403
Dishwasher
Kenmore
63016309404
Dishwasher
Kenmore
63016309405
Dishwasher
Kenmore
63016309406
Dishwasher
Kenmore
63017303400
Dishwasher
Kenmore
63017303401
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service