This detergent and rinse aid dispenser is an important part in your dishwasher. It is located on the inside of the door and it holds and releases the detergent during the wash cycle of your dishwasher. The cover of the dispenser has a latch mechanism which is controlled by the electronic board or the timer. The latch releases to open and dispense the detergent at the proper time during the cycle. Overtime the mechanism might wear out, or the latch might break. If your appliance will not dispense detergent you will need to check this part. Make sure the part it free of debris, and that the hinge can move freely. If there is nothing from preventing this latch from releasing and the dispenser door from opening, you may need to replace the dispenser.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dennis H - November 4, 2021
Verified Purchase
Bosch detergent & rinse aid repair
The part arrived quickly & was an exact replacement. The repair took less than an hour & the dishwasher is back in operation.
★★★★★
★★★★★
Robert S - March 11, 2019
Verified Purchase
Easy repair
Part was a little difficult to get into place but did go in and seems to be working great
★★★★★
★★★★★
Theresa B - May 21, 2018
Verified Purchase
Exactly what I needed!
It was just what I needed and super easy to install.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door on the old rinse additive would not stay closed.
Ordered the complete soap /rinse additive unit.nturn power off. Take the peripherical screws to remove the front of the door. Slide the door down and off. Unplug wires 2 places. Use a screwdrive to pry the tabs allowing the unit to come out
Important. Add a little Vaseline to the seal on the new part. Press it in until the ta
... Read morebs engage. Reconnect wiring and replace door front. Turn power on Job complete.
Read less
Bob from COOKEVILLE, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
detergent dispenser on Bosch dishwasher was not staying closed
My husband spent minimal time and maybe just screwdriver for repair of replacement part. Your company was great to work with. Thank you!
RAYMOND from WOODHAVEN, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring assembly on detergent and rinse aid dispenser broke so the sliding lid would not operate
Here are the steps you need to take to do the job properly:
1. turn off electrical circuit breaker to the dishwasher 2. remove 8 total hex screws (3 on each side and 2 at the top) of the inside door panel. The door panel will slide off so be careful and it happens pretty quickly when the last hex screw is removed. 3
... Read more. unplug the wiring harness to the detergent/rinse aid dispenser 4. you need to use a flat head screw driver to lift the metal flanges on the top and bottom of the detergent/rinse aid dispenser. 5. the unit will pop out toward the inside of the dishwasher 6. insert the new detergent rinse/aid dispenser and very important all metal flanges are pulled back over the plastic edge (top and bottom) of the dispenser unit. The screw driver needs to be used to assist in pushing the dispenser unit as tight to the frame of the door to ensure the metal flanges grab hold and lock in. 7. re-attach the wiring harness 8. re-install the dishwasher door with 8 hex screws. Doing this step alone is challenging as the door frame will want to keep going up to close. I used a small foot stool and placed it inside the dishwasher front area on top of the inside metal door area so the door would stay open roughly half way. I then used my knees to prop up the outer door cover while i got 2 screws started then was able to easily complete the job. 9. run the dishwasher with a detergent packet loaded into your new dispenser. I checked for 15-20 minutes during initially running to insure no issues or leaks. 10. One last note - my Bosch dishwasher had a custom wood door installed to the outer panel to blend in with our kitchen cabinets. The door itself was much heavier as a result. Some of you may not experience the slight difficulty i noted above in step 8. Good luck.
Read less
Steven from SUWANEE, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
13 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
March 12, 2019
The door to the rinse agent will no longer latch closed. Is there a door replacement or must i replace the whole detergent/rinse agent component?Thanks.
Hello Wayne, thank you for your question. The Dispenser Lid is sold separately as part PS8697157.
20 people found this helpful.
Was this helpful?
Thank you for voting!
Jennifer
January 28, 2019
My Bosch dishwasher goes through a lot of rinse aid. It seems like it is either a problem with the gasket inside the dispenser or it also seems that the door for the rinse aid does not close tightly. Can i just replace the door on the rinse aid dispenser or do i need to replace the entire soap/rinse aid dispenser?
For model number SHV46CI3UC/30
Hello Jennifer, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8697157 for the rise aid lid. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
July 30, 2019
My dishwasher is one of the above models. This looks like the part that I require. Is it?
For model number Siemens Model SL34A, SL84A SL95A
Hi Tom,
Thank you for your question. To verify that we provide you with the correct part information, we would require the model number from the dishwasher. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Model-Number-Locator+4+repair.htm. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gerrit
January 9, 2020
Can I get just the rinse aid door for the Kenmore elite dishwasher? If so what is the part number?
For model number 63016309404
Hello Gerrit, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8697157. We hope this helps!
I NEED THE COVER FOR THE SOAP DISPENSER. DO I NEED TO BUY THE WHOLE UNIT OR JUST THE LID.
For model number SHU3322UC/12
Hello Ruth, Thank you for the question. Very sorry, the Lid is only sold as part of the Detergent and Rinse Aid Dispenser, it is not sold on its own. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
John & Leilani
January 17, 2022
When Rinse Aid is added and door is closed, Rinse Aid leaks from between door inner panel and Rinse Aid Dispenser.
Can this be solved with a cover replacement or does entire detergent / rinse aid dispenser need replacing? (Detergent dispenses as needed on time.)
For model number SHX68T55UC/02
Hello John & Leilani, Thank you for your inquiry. We would recommend the lid part# PS8727395, or the seal-part# PS8730291. Good luck with your repair.
Hello Tom, thank you for your question. The dispenser for your unit is actually PartSelect Number: PS8722047. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Barbara
September 16, 2019
What part should i order to replace the seal on the rinse agent dispenser. It has deteriorated.
For model number Shu43c
Hello Barbara, thank you for your question. The rinse aid dispenser cap is Part Number: PS8697159. I hope this helps!
Was this helpful?
Thank you for voting!
Don
June 4, 2019
The spring that opens the door, is it sold separately? Or do i have to buy the whole assembly.
For model number 00490467
Hello Don, thank you for writing. We would be happy to look into this, but we will need the model number for your appliance to do so. We look forward to hearing back from you.
Was this helpful?
Thank you for voting!
Monica
June 13, 2019
My dishwasher keeps draining and won't continue on to fill no matter what setting i use. I had recently cleaned the drain and ran thru a cycle empty. Has not started normally since.
Hello Monica, thank you for inquiring. The issue may be with either the Water Inlet Valve or the Pressure Switch. We will need the model number for the dishwasher to locate the correct replacements.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
