Heating Element

Hi Rick, Thank you for your question. This installation is an intermediate level installation. You will have to shut the water and the power off to your appliance. You will have to remove the kickplate/access panel at the bottom of your appliance. Then the outer door panel. After that you will have to remove the bracket that would be just behind the kickplate. Once you have all that removed, you will have to remove your lower rack, and your filter and manifold from inside of the dishwasher. Once you have those parts uninstalled, remove the mounting brackets of your appliance and remove the appliance from underneath the counter. You will then gently place it on it's back. This will give you access to the bottom of the appliance. Remove the hose going to the water inlet valve. After that remove your drain pump and sump assembly from underneath your dishwasher. This is where your heater assembly is located. Unplug it from the wiring harness and then reinstall the new part by following these steps backwards. If you are uncomfortable with this installation, I would suggest contacting a certified technician to help you out. Good luck with your repair.

Hi Cody, Thank you for the question. Yes, if the water is not heating and the dishes do not come clean or dry, I suggest replacing the Instantaneous Water heater. Good luck with the repair!

Hello Marilyn, thank you for writing. Replacing this Heating Element part PS8717889 for your model should fix the issue.

Hi Nellie, Thank you for the question. The Element is located under the tub on the back side of the sump assembly. Hope this helps!

Hi Bob, Thank you for your question. Based on what you described it may be a heating issue in the dishwasher and you will need to check the heating element. I hope this helps. Thank you and have a great day!

Hi Rita, Thank you for the question. The most common issue woudl be the heating Element, PartSelect Number: PS8717889. Hope this helps!

hello Mathieu, Thank you for the question. We suggest testing the Heater with as multimeter to check for continuity. The most common issue is a defective Heater. We hope this helps!

Hello Bill, Thank you for contacting us. You will need test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. I suggest checking PS8717889 Heating Element, and PS8733807. Have a great day!

Hello Casey, thank you for your question. Based on the description that you have provided, we would recommend checking the following parts to fix the issue: the hi-limit thermostat, part number PS8697055, and the heating element, part number PS8717889. We hope this helps!

Hello Jen, thank you for the question. According to our research, the E09 error code indicates that your heating element is defective. The mentioned part is not compatible with your model. Your model contains a heat pump, part number PS11724988. We hope this helps!