Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James W - January 6, 2023
Verified Purchase
Part fit perfect
They had the part , shipped it quick and I had dishwasher working soon after I received it.
★★★★★
★★★★★
PAUL B - April 21, 2020
Verified Purchase
Buttons should come with this part
Part was in good condition and easy to install
★★★★★
★★★★★
Richard G - April 2, 2019
Verified Purchase
like new
beautiful part, the trick seems to be that the buttons have to go in a particular order.
★★★★★
★★★★★
Scott K - August 3, 2018
Verified Purchase
Good experience. Thanks.
Part looked and fit correctly. Good experience.
★★★★★
★★★★★
Rick E G - April 3, 2018
Verified Purchase
Exact fit, perfect part
Great price and easy to change out this part.
★★★★★
★★★★★
Scott B - March 8, 2018
Verified Purchase
Dishwasher repair
The part came really fast and took only about 20 minutes to install.
★★★★★
★★★★★
Michael I - February 11, 2018
Verified Purchase
Part was in great condition
Everything was fine . I expected buttons for different wash cycles would have been included. My only beef
★★★★★
★★★★★
Jean E - January 27, 2018
Verified Purchase
Easy repair
Part was as expected and arrived on a timely basis. No instructions were included but none were needed.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top Fascia panel brackets cracked
Remove lower front panel 6 screws, remove screws from top fascia panel , prey front edge of top panel taking clips out of mounting holes in door, panel will slide then push 2 lower clips on panel to pop panel off. When re-installing cycle buttons numbers are lettered have to go back same location or buttons will not let panel to fit corre
... Read morectly, when panel is snapped in install 2 screws in bracket clips and reinstall front panel. Shut off power before starting.
Read less
Donald from SCRANTON, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The facia panel broke and needed to be replaced.
There are three screws on the left and right side each that secure the lower outside cover to the inner panel. They need to be removed to provide access to the two screws that hold the facia panel to the inside panel. Remove the three screws on each side. The lower panel is now separated from the inner panel. Then remove the two screws th
... Read moreat secure the facia panel (the one you are replacing) and lift the facia out. The new facia panel does not come with buttons. So transfer the buttons from the old to the new panel, click it in place - needs a little TLC to align the tabs at the top and the screw holes with those in the inner panel. Make sure all buttons can be operated before tightening the screws that hold the facia panel onto the inner panel. Then align the lower panel's screw holes (3 on each side) with the holes in the inner panel (you might need someone to help you hold the two panels in alignment while you secure the location with at least one screw each on the left and right sides). Then put the remaining screws and tighten them. You are done replacing the facia panel.
Read less
Nitin from MASON, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door handle cracked near the control buttons - making the appliance use inconsistant
I used clamps to clamp the door together while I unscrewed the front panel from the back. Once the screws were out, I carefully released the clamps holding the two together with my other hand. Once the door was off, I release the control cover - it was a bit tricky b/c I didn't want to break any other pieces. Once that was off, I remov
... Read moreed the control button covers from the old control cover and installed them on the new one. I then carefully removed the small silver door handle cover from the old one and installed it on the new one. This piece was a bit tricky b/c it could bend and break easily if wrenched too hard. Once that piece was on, I snapped the control cover onto the front door panel - which snapped on very easily. I then re-clamped the front panel to the metal door carefully aligning the screw holes and inserted all the screws. Once they were lightly tightened, I released the clamps and tried the buttons. All worked well and the control panel was fixed.
Read less
Lon from LAWRENCE, KS
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
20 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
October 3, 2019
The control panel facia snapped off where the plastic is screwed onto dishwasher. When i open the door the panel comes off. How do i order a new one. Thanks
For model number SHE43P06UC/64
Hello Ron, thank you for inquiring. The correct replacement for your model is part number PS8734594. To place an order, please feel free to contact customer service by phone or you may do so online. Thank you!