This door seal, also known as a door gasket, is an authentic manufacturer replacement part for your dishwasher. It is responsible for creating a watertight seal between the tub and dishwasher door and preventing water from leaking out while the dishwasher is running. Therefore, if you notice water leaking from the front of your dishwasher and difficulties closing the door, then it is likely that the seal is either worn down, torn, or has a buildup of mold. Carefully pull the defective seal from the perimeter of the tub and clean the area thoroughly. Place the new seal in the grooves around the tub and close the dishwasher door to press it into place.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
Part# 00432490 replaces these:
AP3194023, 00500038, 432490, 500038
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
4.5
Filter By Rating:
5 Stars
1
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jose G - June 26, 2018
Verified Purchase
Good Seal
The part works great.easy to replace
★★★★★
★★★★★
John B - February 10, 2018
Verified Purchase
Generic part replacement
Received the lower door seal for the dishwasher but was unable to find any installation instructions on your website. However I’m fortunate to have the ability to figure out that the new part was an improved design and after carefully removing the damaged old seal I was able to install the “new” but different part in its place. I was pleased with the result. I still would have benefited seeing your instructions but wasn’t able to find it. Thank you
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lower door seal leaking.
Vice grip door hinges. No need to disconnect, un hook hing springs. Works slick. Small vice grips. On hinges. Remove tore screws. Remove seal , and replace seal, reconnect door screws. Boom done.
Raymond from WARSAW, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking lower door seal
To perform the repair, the door panel must be removed (8 Torx screws) and the door removed from the hinges in order to access the lower door seal. For this model Bosch and other similar models, the hinge springs must then be disengaged (safer) or kept from retracting. To disengage the springs requires removing the entire unit, disconnecti
... Read moreng the water supply, and flipping it on its side to disengage the springs. I chose the latter, keeping the unit in place, holding the hinges with vice-grips on either side, then removing the door. This was not easy and caution is required. Either method is risky with a 20-year dishwasher. The replacement part does not fit as well as the original (much sturdier) part, but appears to seal well for now. Repair videos on the internet are for different, newer models where disabling the hinges as described here is not required, making the repair much easier. Recommend looking carefully at your model/manual to determine if the difficulty of the repair is easy or hard.
Read less
Clifford from BOALSBURG, PA
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
6 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower door seal was leaking
There are two ways to do this repair: the "right" way and the hard way. I chose the hard way, as the right way involves disconnecting the dishwasher plumbing, removing the dishwasher from under the counter, taking all the outer panels off, and disabling the door springs. There are good YouTube videos on this. The hard way doesn't invol
... Read moreve that -- but is not all that easy and I'm not sure I'd recommend it. The problem, in essence, is that to install the new seal there is now way to do it without taking the door off the machine and taking the door apart -- which requires that the springs be locked out, if not disabled.
I accomplished that part of it by opening the door, partially, undoing the two screws on each side which hold the hinges, taking the front panel off (piece of cake, with a Torx driver),slipping the door partly off the hinges, and then locking the hinges open with the pry bars.
There are an assortment of ways one could seriously damage either the door or one's self doing it that way -- the hinge springs are very powerful -- so I don't recommend my approach.
Read less
James from NEW HARTFORD, CT
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
7 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 1, 2018
Just bought lower door seal ps8714648 and need instructions and/or schematic to install. Putting this in my sister's dishwasher. Thank you.
Hi John,
Thank you for your question. There is a video on our website that you can reference on how to install the lower door seal. The dishwasher and the seal in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS9495545. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jamie
June 20, 2019
Bosch part. Need the seal (or gasket) between the body and the door goes around up one side around the top and down the other side. Appears to be rubber or neoprene or somesuch. Appears to slip between the tub and side of the appliance?
For model number SHX46A06UC/14
Hello Jamie, thank you for inquiring. You are looking for the Sealing part PS8701890 for your model. It goes up the sides and top between the door and body like you described.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dan
June 21, 2019
I am looking for parts number's for (1) the door seal gasket and (2) the lower door seal gasket for the above model.
For model number SHU33A06UC/46
Hi Dan,
Thank you for your question. The part number listed under your model number for the door gasket is PS8723143 and the part number listed for the lower door seal is PS8714648. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Karen
November 14, 2019
Hi, will your parts ps8723143 (door seal) and ps8714648 work with my Bosch dishwasher? Thank you!
For model number SHE53L02UC/53
Hello Karen, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8723143 for the Door Seal and PartSelect Number PS8714648 for the Lower Door Seal. Hope this helps!
The top piece of the black rubber molding that the dishwasher door closes against fell off. Is there a replacement for this piece?
For model number 5HX68T55UC/02
Hi Susan, thank you for your question. We have researched and found a lock clamp, part number PS10060737, for your model. We hope this is what you were looking for!
DOES THE SEAL AT THE BOTTOM OF THE FRONT PANEL TUCK BEHIND THE PANEL OR RIDE OUT FRONT AND VISIBLE?...THANK YOU. I DIDN'T TAKE NOTE OF ITS POSITION
For model number SHE55M15UC/64
Hi Victor, thank you for your inquiry. We have researched and found that the lower door seal for your model goes behind the front panel. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Karen
September 26, 2019
Hi there. Will part #00432490 (door seal) fit the above Bosch dishwasher?
For model number SHE33T55UC/02
Good Day Karen. Thank you for your question in regards to your unit (Model Number SHE33T55UC/02). Based on our research the part number for the part that is compatible with your unit is 00432490. You can order this part either online at our website www.PartSelect.ca or by calling us by phone at 877-910-4611. Best Regards.
