Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tim M - February 2, 2024
Verified Purchase
Just what I needed
No problem installing, but my SWAG was wrong !!
★★★★★
★★★★★
Dick C - January 23, 2023
Verified Purchase
repair was straightforward, no problem
part was nearly identical to the part it replaced, easy installation
★★★★★
★★★★★
Mark L - November 25, 2022
Verified Purchase
Part was good. Customer representative very helpful in identifying the Part that was needed to effect the repair
Very good
★★★★★
★★★★★
Gregory E - January 26, 2022
Verified Purchase
Straightforward repair
Replacement part works perfectly well.
Needed to replace controller to fix the problem.
★★★★★
★★★★★
Frederic W - September 6, 2021
Verified Purchase
Very easy repair, worked great
The part was easy too find on the part select web site,the part came in a very short time and fit and worked. I was very happy ordering this part. This is not the first time I ordered a part from partselect, my other purchase was exact manufactures replacement part for my refrigerator. This place is great!
★★★★★
★★★★★
Joseph A - May 1, 2020
Verified Purchase
Five star
Great company have ordered previously from them you cannot go wrong
★★★★★
★★★★★
Charles G - April 14, 2020
Verified Purchase
Original replacement valve
Ordered an original replacement valve for my Bosch dishwasher. Came well wrapped, brand new and fixed the problem.
★★★★★
★★★★★
Jerry C - February 5, 2019
Verified Purchase
Easy do it yourself repair.
Long delivery time is an issue!
★★★★★
★★★★★
Brandon B - June 2, 2018
Verified Purchase
Easy fix
Worked great
★★★★★
★★★★★
George R - March 13, 2018
Verified Purchase
Great part - worked as expected
New part. Works great.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water was leaking into the dishwasher when it was not running and leaking onto the floor
Disconnected the water and power, pulled dishwasher out from under the counter, unscrewed the old inlet valve, disconnected hose from exit of inlet valve, noted the placement of the wires and disconnected them. Installed new inlet valve in reverse order and reinstalled dishwasher.
Turn off power to unit! -Remove kick panel,2 screws. -remove water valve, 2 screws, 3 electrical connections, 1 hose clamp. -Remove elbow from old valve and install on the new valve ( use teflon pipe tape) -replace valve, hose & hose clamp, electrical connectors and water supply line. Scew unit in place ,2 screws
... Read more. Check for leaks then replace kick panel, 2 screws.
Read less
William from WOODINVILLE, WA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
18 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
July 3, 2019
Our dishwasher fills with water after the cycle is over, and continues to fill with water while it is off. I either have to turn off the water valve to the dishwasher, or run a drain cycle every 24 hours, or water will run onto the floor. Your help would be much appreciated.
For model number SHU53E02UC14
Hi David,
Thank you for your question. If the dishwasher is filling with water when it is not in use, then a component in the water inlet valve has failed and you will need to replace it. I hope this helps. Thank you and have a great day!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
November 15, 2019
The dishwasher will finish its cycle and there will be no water in the bottom of the dishwasher. However, over the course of a few hours, the tub fills and eventually, we have had leaks from the amount in the tub. I heard this might be the water inlet valve.
For model number Bosch SHX99A15UC / 19
Hello Doug, thank you for your question. Yes, this would be a water valve issue. The water valve is sticking open and allowing water to enter the tub after the cycle is finished. We would recommend replacing the valve PartSelect Number PS8713989. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Edward
December 8, 2019
Dishwasher is 12 years old and fills with water on and off and then will hum and not complete cycle, will this part fix this issue?Thank you.
For model number shu43c05uc
Hello Edward, Thank you for the question. In most cases the valve will need to be replaced. Here is a link on how to test a water valve. Hope this helps!
https://www.partselect.com/Refrigerator+test-water-valve+repair.htm
4 people found this helpful.
Was this helpful?
Thank you for voting!
William
October 14, 2019
Dw makes chattering noise when filling
For model number SHU 43C02UC/17
Hello William, Thank you for the question. This sounds like a defective Inlet Water valve. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
September 18, 2023
My Bosch dishwasher pump will not stop running. I have cleaned all screens and checked for obstruction in the sump. There is a small amount of water in the leak pan. Please advise on areas to inspect for failure. Thank you.
For model number SHU3302UC
Hi Ron, thank you for reaching out. The issue is with the main control board. You may need to replace the control board to fix the issue. The compatible control board for your model is PS8730627. We hope this sorts out your problem!
Is this water inlet valve compatible with my dishwasher (Bosch shu5305uc/u12) partselect number ps8713989
Manufacturer part number 00425458
Thanks
For model number SHU5305UC-12
Good Day Chris. Thank you for your question in regards to your unit (Model Number SHU5305UC-12). Based on our research the PartSelect Number for the Water Inlet Valve that is compatible with your unit is PS8713989. You can order this part either online at our website www.PartSelect.ca or by calling us by phone at 877-910-4613. Best Regards.
Was this helpful?
Thank you for voting!
Monika
December 9, 2019
Our diswasher will not fill with water. You can hear it cycle but there is no water in the tub. I followed the trouble shooting here on your website and replaced the inlet valve. It did not change anything. What do i do? Is there a way to test the pump?
For model number SHE56C06UC / 22
Hello Monika and thanks for writing.
Have you checked the waterlines that attach to your unit for possible kinks and or debris? In rare cases, the house water pressure is just not enough to operate the units. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Rebecca
February 18, 2020
Will this fit my dishwasher? The plastic on my valve is cracked
For model number Bosch Silence plus 50dba
Hi Rebecca,
Thank you for your question. Before we can assist you further, we would need the model number from your dishwasher. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Dishwasher-Model-Number.aspx. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
John
September 11, 2019
Couple issues with our dishwasher. 1. Recently when you start a new cycle the display starts at 13 (normally 98) and runs longer than normal so we have to turn off manually. 2. Water accumulates on the bottom of dishwasher after previous cycle runs and completely drains; we’ve actually found water on the floor in kitchen dripping from unit. Just a couple days ago I turned off the supply line inlet from the house and no more water accumulating on dishwasher bottom so am thinking it might be the dishwasher water supply valve. Any ideas?
For model number SHU5315UC/11
Hi John,
Thank you for your question. If the dishwasher is running longer than normal, the water supply to your dishwasher is not hot enough. According to your manual it should be 140 degrees F. Let the hot water run in the kitchen sink for a few minutes until the the water is nice and hot. Once it is hot, turn your dishwater on. If it is still not hot enough, adjust the water supply according to local codes. If your dishwasher was leaking, the issue is likely the water inlet valve. A component in the valve may have failed and it will need to be replaced. You will need to test the valve with a multimeter. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Donald
December 5, 2018
Looking at the inlet switch mine have a 90 elbow with a male hose fitting, what part is the elbow and is it transferable from my switch?
For model number SHU44C05UC/20
Hi Donald, thank you for your question. Yes, it should be transferable to the new switch. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
