This spark switch is also commonly referred to as an igniter switch, or a burner ignition switch. This part is used on ranges and cooktops, this part makes the spark required to ignite the burners in your appliance when the burner knob is in the lite position. If the burner on your range or cooktop will not ignite you will need to check and possibly replace the burner ignition switch. You will need a screwdriver to successfully install this replacement part. Before you begin any repair work on your appliance make sure it is unplugged, and ensure the gas supply has been shutoff. This spark switch is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Bosch, Thermador.
Part# 00189008 replaces these:
AP2821597, 00411414, 14-33-936, 189008, 411414
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
January 17, 2019
When using the cook top burners: Many times to light the burners we have to use a lighter. Some burners ignite and work, while others do not. Today all burners ignite and work. When turning the burner knob it will click always, but not always burn. Any thoughts what to check ??
For model number prg486glus
Hello Mike, thank you for your question. If you're always hearing a click when the burners are attempted to be lit, the issue is most likely the spark module PartSelect Number PS8737287. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Jay
August 7, 2019
As soon as you plug the cookbook in, all knitters start clicking. When you light the back right burner the whole thing functions properly. Turn the back right burner off and they all start clicking again. Could it be i have one bad igniter switch (back right control knob)?
For model number Ngt935uc
Hello Jay, thank you for your question. The issue is probably a bad spark module PartSelect Number PS8737287. We would recommend replacing that part first. I hope this helps!
Was this helpful?
Thank you for voting!
Gil
November 6, 2019
One burner will spark continuously anytime it is not lit. Sometimes a burner on the opposite side will spontaneously turn off. Should i start by replacing the module? Do i get access to the faulty part by lifting the hob from the cabinet?
For model number SGSX304CS
Hi Gil, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your spark module being the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Sammy A
January 4, 2023
when turning the knob for the top right burner, igniter doesn't spark. when using other knobs the igniter sparks and the burner lits up. any suggestions what needs to be replaced?
For model number SGS305FS/02
Hello Sammy, Thank you for your inquiry. Researching the model number that you have provided, it could be an issue with the spark igniter on the burner, or the spark igniter switch. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
