This gas conversion kit is used to convert natural gas burners to liquid propane in dryers. If your dryer will not start, heat, or there is an unusual smell, replacing this part can be a solution to the problem. The tools needed for this repair project are: a putty knife, 5/16 inch nut driver, small flathead screwdriver, pliers, and a 3/8 inch wrench. As a safety precaution remember to unplug your dryer from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions and a detailed diagram.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sheila
August 2, 2018
Will the lp conversion kit # w10606694a work on my Amana dryer, when the dryer says to use kit#w10466574b ?
For model number NGD4655EW
Hello Sheila, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect #: PS8691743 / Manufacturer #: W10606694A. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Stephanie
July 25, 2019
What is the correct lp conversion kit for this dryer?
For model number MGDB765FW
Hello Stephanie, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8691743. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ted
May 20, 2022
IS THERE A VIDEO OR INSTRUCTIONS ON HOW TO INSTALL THE NEW ORFICE?
For model number MGDB800V0
Hello Ted, Thank you for the question. Very sorry we do not have a video at this time. Here is repair story from a previous customer. "First I removed the front panel which allowed access to the burner assembly. Then I removed the gas connector and elbow from the back of the dryer. Then I removed 2 screws that hold burner assembly in place and 2 screws that hold an angle brace for the burner assembly. Had to loosen the screw that clamps around the gas pipe holding it in place clear in the back inside dryer housing. Unplugged all wiring connectors, then I removed the burner assembly and removed the 2 screws holding the burner tube to the valve. Remove the orifice and replaced with the proper size for LP gas. Then removed the blocking pin and replaced with one for LP gas. Then reassembled in reverse order. Actually pretty easy." If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ted
May 20, 2022
Is this the correct kit for my Maytag Bravo MGDB800VQo Gas dryer? I need to convert it to Propane.
For model number MGDB800VQ0
Hello Ted, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8691743. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brett
June 26, 2021
My dryer was converted from natural gas to liquid propane, I think the original orifices and parts were lost, which parts will I need to convert it back to natural gas?
For model number MGDC400BW2
Hello Brett, Thank you for the question. The parts that would be needed for converting back to Natural gas will be the orifice PartSelect Number PS11740485. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jessica
October 15, 2019
Hi I need the conversion kit for my dryer Whirlpool wgd9620hc1 is this the right kit?
For model number WGD9620HC1
Hello Jessica, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8691743. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lorie
November 18, 2019
I am looking for the conversion kit so we can use natural gas with this dryer
For model number GGW9250PW3
Hello Lorie, thank you for your question. To change this back to Natural gas the gas valve would have to be ordered. That is PartSelect Number PS334359. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Bobbi
February 9, 2020
I am looking for a conversation kit from natural gas to propane. I have order the suggestive manufacture part but it will not fit. I have an older model Kenmore dryer.I have ordered the wrong part twice now. need help. thank you!
bobbi
For model number W10293913
Hello Bobbi,
Thank you for your question. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Please resubmit your question with your model number, and we can help you out. We hope to hear from your soon.
Was this helpful?
Thank you for voting!
Rich
June 17, 2019
Need conversation kit from gas to lp
For model number WGD7500GCO
Hello Rich, thank you for inquiring. This is the correct Liquid Propane Conversion Kit for your model.
Was this helpful?
Thank you for voting!
Don
June 27, 2019
Do this part work with my Amana range ags760w
For model number AGS760W
Hello Don, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the manufacture number of the unit. It will start with a P11. Once you have located the number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
converting to LP gas
First I removed the front panel which allowed access to the burner assembly. Then I removed the gas connector and elbow from the back of the dryer. Then I removed 2 screws that hold burner assembly in place and 2 screws that hold an angle brace for the burner assembly. Had to loosen the screw that clamps around the gas pipe holding it in place clear in the back inside dryer housing. Unplugged all wiring connectors, then I removed the burner assembly and removed the 2 screws holding the burner tube to the valve. Remove the orifice and replaced with the proper size for LP gas. Then removed the blocking pin and replaced with one for LP gas. Then reassembled in reverse order. Actually pretty easy.
Robert from Tenino, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench (Adjustable)
29 of 35 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Convert New Dryer to Propane from Natural Gas
1.Unplugged the connections to dryer door 2. Removed dryer door, front cabinet,popped off the drum belt (this is done by feel),unplugged the drum from cabinet, removed drum, all to get to the gas element inside at the bottom of dryer. 3. Unplugged the connection to the element, then removed unit to get to the burner parts. 4. Replaced the natural gas burner element with the LP gas element. 5. Re assembled dryer and tested. *Note: Actually my son did the work while I read the very easy to follow directions. Since neither of us has disassembled a dryer before, the thought of taking a brand new dryer all apart was more daunting than the actual task.
Teri from Bakersfield, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
8 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LP conversion kit
The design of the dryer did not make the conversion easy, I had to disassemble the entire front end, top and remove the drum. The kit included a new spud that's it (22.00?). Anyway the gas valve is convertible from NAT to LP only requires turning a portion of the valve about 25 degrees. I managed with a screwdriver as I could not locate my snap ring pliers(just moved). The directions were spot on, read them through once before you start.
Steve from Brunswick, VT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
7 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lowes gave me the wrong kit
Lowes gave a conversion kit for 29" wide dryer, not by model number. Could not find the right kit. Called PartSelect , in 2 minutes they had the right kit, by model number. Sent overnight mail, followed direction and boda bing it was done.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mike R - December 22, 2022
Verified Purchase
Easy conversion. Worked perfectly.
Part was as described and worked perfectly . Converted natural gas to LP gas as we moved to the country where there is no natural gas.
★★★★★
★★★★★
Shelli N - August 16, 2022
Verified Purchase
Easy repair
Part came fast, easy to install.
★★★★★
★★★★★
MICHAEL R - October 17, 2021
Verified Purchase
Correct part, but unclear
The part took over a week to arrive instead of the 2 days promised, but that seems to be the fault of FedEx. There was no explanation for why there were two slightly different orifices or which one I was to use, so I guessed???? Otherwise, the parts were good, and the clothes dryer is working with them.
★★★★★
★★★★★
Ron D - January 30, 2021
Verified Purchase
Extra parts
Kinda a waste of money to make you buy all of these parts just for 1 of them.
★★★★★
★★★★★
AGRIPINA B - March 14, 2020
Verified Purchase
Product is what it is described and best price available
Very Good costumer service! Fast delivery and hassle free buying from this store.
I forgot the name of the gentlemen who assisted us who by the way was very patient, courteous and knowledgeable in his field.
Our washer was already old and product that we need was discontinued, But this guy was able to give as a replacement that will work on our old unit.
Whoever you are please email me so i can re edit this review and put your name on this review, for you deserve a good word.
Thank You very much and May the Only True Living God JESUS CHRIST Blesses you all.
★★★★★
★★★★★
Paula H - December 12, 2019
Verified Purchase
Gas converter
Call was super easy, part delivered when said, brand new part. In sales and working terrific. Thank you all
★★★★★
★★★★★
Jarath S - March 13, 2019
Verified Purchase
Very easy
My part came in three days very fast and full detailed instructions made it very easy
★★★★★
★★★★★
Benjamin K - May 31, 2018
Verified Purchase
LP conversion kit
Ordered the kit 2 times and both times came missing the propane orfice. I ordered it through somewhere else. Not happy at all.
★★★★★
★★★★★
Terry P - April 20, 2018
Verified Purchase
Received wrong part
We ended up calling a service repair guy as it was much harder than we were led to believe. The parts we received were for butane not propane per the certified repairman. Need to return product
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff