If the magnetron overheats, this thermostat will stop the microwave from heating.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave, Microwave Oven Combo.
Part# W10598693 replaces these:
AP5737091, 8206342
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Pompeyo A - July 8, 2021
Verified Purchase
Magnetron Thermostat
The Magnetron Thermostat is the exact same product that I needed for my microwave.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
November 30, 2023
Hello! The microwave works fine unless we use it too much and you can hear a relay click and it will still run but it's definitely not heating. We shut it off and wait for the click and then it's good to go again. Could you tell me what part I need to replace please is it the magnetron thermostat or? Thank you!
For model number WMH1162XVD-2
Hello Brian, thank you for the question. Based on the description that you have provided, we would recommend checking the magnetron. If it is not faulty, then replace the magnetron thermostat, part number PS8691721, to solve the problem. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brian
December 1, 2023
How do I test the magnetron?
Thank you!
For model number WMH1162XVD-2
Hi Brian, Thank you for asking. The magnetron can be tested with an multi meter set on the highest scale. Across the terminals, you should read 0 ohms (or .5 ohms). Test both terminals to ground with one lead and make sure it is not shorted. We hope this helps with the repair!
Was this helpful?
Thank you for voting!
Michael
October 16, 2022
Hi microwave is working other than no heat. ?
For model number Wmh73521cs-3
Hi Michael, thank you for reaching out. According to our research on the model, the diode appears to be faulty and you may need to replace it with part number PS12584264. You will also need to check the thermal fuse, part number PS1960938, to see if it's working properly. We hope this information helps.
will this part cause the 20 amp. fuse to blow? or would it be the High voltage capac.itor.
For model number amv6502res1
Hello Richard, thank you for a very interesting question. The magnetron thermostat stops the microwave from heating when the magnetron overheats. The high-voltage capacitor, part number PS11731152, can cause the fuse to blow. We hope this information helps!
