Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Sal S - September 11, 2022
Verified Purchase
No more freezer frost.
Selecting the part was very easy using the website navigation.
Soaked the gasket in warm water and and pressed it into place.
No more freezer frost.
Thank you.
★★★★★
★★★★★
Stella B - August 6, 2022
Verified Purchase
Good quality and easy to install
The old part was relatively easy to replace. The new one from you folks worked well. It was equal to the original. Thanks!
★★★★★
★★★★★
JOSHUA P H - May 24, 2021
Verified Purchase
OK
All worked well.
★★★★★
★★★★★
Ellen S - May 13, 2020
Verified Purchase
Refrigerator gaskets
Came well boxed in great condition. Easy job to replace the gaskets. Highly recommend.
★★★★★
★★★★★
Joseph N - December 28, 2018
Verified Purchase
Easy repair
Part in excellent condition and easiely installed.
★★★★★
★★★★★
Thaddeus S - December 21, 2018
Verified Purchase
Freezer door Gasket
Install was very easy, install video was on your web site
★★★★★
★★★★★
Lorraine S - November 13, 2018
Verified Purchase
Perfect Part, Easy Installation
Love how quick the part came and it was easy to install
★★★★★
★★★★★
Claudia W - June 7, 2018
Verified Purchase
Refrigerator repair
The part is for a refrigerator at our condo. We will not be there til October thus I can give no review at this time.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gasket on the freezer door was worn out causing "snow" to form on the inside of the freezer.
I pulled off the old gasket and placed the new gasket in the existing groove, shut the door; problem solved!
Judith from WEST CHESTER, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer Compartment Gasket Replacement
My freezer compartment gasket was torn and needed replacement. This was on a bottom freezer Kenmore refrigerator. I couldn't find directions for how to take the freezer compartment door off, and figuring out how was the hardest part. Here are the instructions: 1. At least 24 hours prior to starting, remove the gasket from the pack
... Read moreaging and lay it out in a warm area, to allow the creases to come out. 2. Unplug the refrigerator. 3. You will have to take BOTH doors off, so put at least the freezer compartment contents in a cooler so they don't thaw. Also remove all items from the refrigerator and freezer door. 4. Remove the refrigerator door first - remove the plastic cover from the top hinge, then remove the 3 metal screws holding the hinge in place. Lift the door up, and it will come right off. Set it aside. 5. Now remove the freezer door - there is one bolt head, for the top hinge pin. Remove it, and lift the door up and put it down on a table. 6. Towards the center, pull up on the old gasket, and use a pair of diagonal cutters to cut it in half. It will take a few cuts, but eventually you will get it out and cut in half. Then remove the old gasket. 7. The new gasket simply presses in. Start at two diagonal corners, then press the other two corners in, then do the straight sections. 8. Now replace the freezer door, then the refrigerator door, plug in the refrigerator, and put the contents back in.
Read less
John from ATLANTIC BCH, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace freezer door gasket
Removed door from slide bars with small nutdriver, pulled old gasket out of retaining slot, cleaned slot & area around it, pressed new gasket into place with fingers, relatively easy. Used hair dryer to make sure gasket was formed properly and contacted fridge unit eavenly.
Thaddeus from PHILA, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sam
December 19, 2018
My freezer door will not seal shut. I get alot of frost in upper left corner. Will a new seal fix my problem
For model number wrb322dmbw
Hello Sam, thank you for your question. Yes, replacing the door gasket should fix that problem. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
July 2, 2021
Does this freezer gasket have measurements available? Your part # w10443315
For model number PBF2255HEW
Hello Susan, Thank you for the question. Very sorry, the manufacture has not provided Measurements of this gasket. However, checking the model number provided we can guarantee this is the correct Freezer Door Gasket for your mode. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Chieko
July 5, 2021
We are looking for the freezer gasket for the above model refrigerator.
For model number ABB2222FEW
Hello Chieko, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3651281. We hope this helps!
