This is a genuine OEM replacement timer (60Hz) for your dryer. To complete this repair you will need a #2 Phillips screwdriver. To access the timer, you will need to remove the top of the back panel. Disconnect the wires to the timer terminals, remove the timer knob, and unclip the timer from its metal tab. Replace with the new timer and reassemble the wires and remaining parts. Make sure to disconnect power to the dryer before beginning this repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Dryer Dryer Timer
Troubleshooting
This part fixes the following symptoms:
Timer Not Working
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE4M533 replaces these:
AP5780508, WE4M364
Customer Reviews
Average Rating:
★★★★★
★★★★★
50 Reviews
4.6
Filter By Rating:
5 Stars
41
4 Stars
3
3 Stars
2
2 Stars
3
1 Star
1
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
RICARDO P - August 25, 2023
Verified Purchase
Part works okay
part work okay, although it feels very cheap.
★★★★★
★★★★★
Mary I - December 29, 2022
Verified Purchase
Dryer Timer - Easy Install
So thankful that I was able to order this and it came really quickly. The video link that accompanied the purchase was great! I was able to install this with no issues. Thank you!
★★★★★
★★★★★
Tony M - July 28, 2022
Verified Purchase
Easy replacement part.
Loved the video that was included.
★★★★★
★★★★★
Stuart W - April 27, 2022
Verified Purchase
Finally on time
great product for a good price and easy installation instructions.
★★★★★
★★★★★
Ehrich T - November 3, 2021
Verified Purchase
Dryer timer
Works great. Went in fast and easy
★★★★★
★★★★★
TIM N - August 4, 2021
Verified Purchase
I like to buy parts from Part Select for my dryer and washing machine.
I like this item. It fixed my dryer, I like to buy parts from Part Select.
Thanks
★★★★★
★★★★★
Chris W - March 26, 2021
Verified Purchase
A+
Part came quick and worked great
★★★★★
★★★★★
Diane L - March 9, 2021
Verified Purchase
Great part
Great part. Fast shipping.
★★★★★
★★★★★
DANNY P - August 12, 2020
Verified Purchase
Dryer Timer Review and Replacement
Dryer Timer Review: Part was received quickly Very easy to install. Simply remove rear cover of control panel and disconnect wires Twist old timer slightly until the tabs release. Simply align new timer with tabs and twist into position, Attach wires and install control panel cover and attach knob. All works and back in operation.
★★★★★
★★★★★
Diana K - June 23, 2020
Verified Purchase
Easy to install. Did it myself.
My part came really quickly and in perfect condition
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 23 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer timer had gone out, and would not start.
I remove the know, slid the old timer out, leaving the wires connected. Placed the new timer into position and secured it, then unplugged wiring one at a time, placing them onto the new timer. All went great.
JESSIE from NATCHEZ, MS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knob for the timer was broken and the shaft on the timer was distorted.
Using a battery drill and screwdriver bits along with star bit. I had to search for my star bits or the time would have been less than 10 minutes. Removed the top panel, removed the timer which required a star bit, and installed timer, Reassembled the top panel and the knob to the timer. The machine has worked perfectly since the repai
... Read morer.
So easy - couple screws in the back, move the wires from the old dryer timer to the new one, snap it in place, and put the screws back in. Done in no time.
the dial was hard to turn and the timer quit working
YouTube showed me just what to do. I unplugged the dryer and took the back off. Then I took a picture of the timer with my phone since there were about 6 different colored wires that had to be unhooked and put back in the right place. It was not difficult. Last I turned the timer in the bracket so it was secure. I also had to order a new
... Read moredial since the old one was split from years of use. A repairman would have charged for the call out plus the parts so I saved money by doing it myself. P.S. I'm a 71 year old woman.
Read less
Kathleen from HASTINGS, NE
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer in Timed Dry cycle stopped at 50 minutes.
Unplugged dryer from wall.Removed 3 screws from the back that held the front face plate on. Pulled face plate away and to the right to release it from the dryer. Lifted the locking tab slightly and turned the old timer counter clockwise to remove. One at a time I removed a wire and connected it to the new timer. Installed new timer to th
... Read moree back of the face plate. Pushed on timer knob so I could hold the back of the timer to get it all the way on to the shaft. Lined up the three tabs at the bottom of the face place and slid it to the left , pushed the face face into place and secured it with the 3 screws. Plug Dryer back in. Done in less than 10 minutes. Dryer now works properly again. I know I saved myself a lot of money doing the repair my self.
Read less
Chris from KATY, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The control knob broke off the timer
Unscrewed the top back of dryer. Than took off wires to timer and twisted out of tab. Remember to unplug dryer before you start. Than assembled new timer the same way you unassembled it.
TIMER STOPPED MATCHING UP WITH WHAT IT WAS SET ON AT THE DIAL
JUST FOLLOWED THE VIDEO PROVIDED ON THIS SITE. VERY EASY TO DO WITH BASIC TOOLS, AND A FEW MINUTES.
bryon from ZEPHYRHILLS, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The timer on the dryer would not set or run properly
We were able to do the repair easily by following the video instructions. Be sure to record where the different wires attach. You may need a square tipped screw driver, we had to buy one.There was one extra screw holding in the timer that I don't think was in the video. Before ordering the timer, take off the timer knob and check to
... Read moresee if it is cracked inside. You may need to order the timer knob in addition to (or instead of) the timer itself. You can test this by taking off another knob and putting it on the timer. Make sure the metal clip is inside the shaft of the knob. The main difference between the knobs seems to be the position of the arrow. We are now using the knob from the signal buzzer while waiting for the timer knob to arrive.
Read less
Joan from BERKELEY, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer timer quit working
Watched the video they sent when they shipped my order. Started they repair and was done in less than 20 mins. Very easy to complete.
Jessica from CONNEAUTVILLE, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
38 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Keri
August 23, 2017
Dryer timer - when turning the knob to select a timed setting the knob turns with no effort almost spins and the dryer will not turn on. A few days before, the dryer would only turn on at certain timed settings and shutting off before drying time was finished.
For model number GTDP300EM1WS
Hi Keri,
Thank you for your inquiry. If the timer knob is turning with no effort you may need a d-shaped knob insert clip to keep it in place. The part number for it is PS267091. If this does not fix the issue you may have to look at the timer. I hope this helps. Thank you and have a great day!
49 people found this helpful.
Was this helpful?
Thank you for voting!
Al
September 16, 2017
The timer for my GE dryer (#we4m533) on you site looks different than the one in my dryer. It seems that there are less wire post, and when i transfer wires from my dryer to the new timer they are not in the same order. And i have no way of knowing where to place them.
For model number Gtdp180edoww
Hello Al, thank you for contacting us. We have a how to video that shows how to install this part. You can follow the link below, hope this helps!
https://www.partselect.com/PS8690648-GE-WE4M533-Timer-60Hz.htm#RepairVideo
14 people found this helpful.
Was this helpful?
Thank you for voting!
Jake
January 31, 2019
I need the d shaped shaft that goes into the timer. Thats the only part that is broken, i don't need the full timer.
For model number WE4M533
Hello Jake, thank you for inquiring! Unfortunately, the shaft is only sold as part of the timer, so you would need to purchase the timer to replace the shaft. Good luck with your repair!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Casey
September 12, 2017
Does the timer have the d stem already attached?
Hello Casey, thank you for contacting us. Yes, the timer has the D shaped shaft on it. Good luck with the repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
July 31, 2017
If this part is broken, does it effect basically everything, e.G. Starting, interior light, et al?
For model number GTDX200GM1WW
Hello Ed,
Thank you for the great question. The timer would not effect the interior lights from coming on. It can effect the appliance from starting. If you are getting no power at all to the appliance I suggest checking the Power cord to make sure it is in a working socket and it is plugged all the way in, they can come loses over time from the appliance moving with uneven loads. I would also check to make sure there is no damage to the terminal block where the cord is attached.
Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
December 5, 2018
Should i use we4m532 or we4m533 timer for above model dryer to replace timer?
For model number HTDX100EM0WW
Hello Susan, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS8746223, Manufacturer Part Number WE4M532. Thank you for your inquiry, good luck with this repair!
Good Day Wanda. Thank you for your question in regards to your unit (Model Number GTDP180ED0WW). Based on our research the part you are looking for is the Control Knob and Clip - White (PartSelect Number PS9493075). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Al
September 15, 2017
The part i see on the screen dose not look like the one that's in my dryer now
For model number GDTP180EDOWW
Hi Al,
Thank you for your inquiry. The timer is coming up under the model number you provided so it should it should work on your appliance. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Florence
November 6, 2018
I need a new timer, which i found. I also need the knob for the timer that goes on the front. The threads are broken on mine. What is the part number for the timer front knob?
For model number GTDX180ED3WW
Hello Florence, thank you for your question. The timer knob for your unit is part number PS8769912. I hope this helps!
The dryer will not shut off. Doesn't matter where the knob is set. Is timer bad?
For model number DHDSR46EG1WW
Hi Pauline , Thank you for the question. Yes I suggest replacing the Timer Switch.To complete this repair you will need a #2 Phillips screwdriver. To access the timer, you will need to remove the top of the back panel. Disconnect the wires to the timer terminals, remove the timer knob, and unclip the timer from its metal tab. Replace with the new timer and reassemble the wires and remaining parts. Make sure to disconnect power to the dryer before beginning this repair.Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
