This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of security in keeping the door closed. This part may become damaged if the door has been opened during a wash cycle. It can also wear out over time. It is fairly easy to replace, simply pop out the old door strike using a screwdriver for leverage, and insert the new one.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Haier.
Part# WD13X10071 replaces these:
AP5781915
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
August 8, 2017
Does this part just snap in place and how do you remove the broken one? Thanks
Hi Steve,
Thank you for your inquiry. This part should just be able to be popped off your appliance and then popped back into place. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
January 27, 2022
Hello,
The dishwasher intermittently beeps every hour or so and the light go on. It's closed and I've reset the breaker. Waiting to see if it resolves the problem but I saw something that mentioned it might suspect the door being opened and if so, a new door latch would be needed. Can this be done by a layman and would you be able to direct me to the specific part as I didn't see it on the model inventory. Thank you.
For model number GE GDT635HSJ2SS Dishwasher Model
Hi Mark,
Thank you for your question. The part number listed under your model number for the door latch is PS6447681. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Replacing the door latch is a repair that you can do yourself. We have included a link to one of our YouTube videos that you may reference on how to install the door latch. The dishwasher in the video may appear different from yours, but it will give you a general idea on how to install the part. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Doesn't complete dry cycle, no clean light, random noises as if door was closing
Removed toe kick. Removed door counter weights and placed door on soft surface. Removed two bolts(I was able to leave hinges in place) slid door panel down and off. Removed plastic snap fit cover and 4 bolts from UI board. Two of the stand-offs where broken, glued them back into place. Ensured jumpers were set to my model, snapped cover back in place and remounted door. The dishwasher now runs through the cycle and clean light but did not dry. That turned out to be a bad flood switch.
Nightmare!!! The Striker latch did not pop out with a screwdriver as it was supposed to. The whole dishwasher needs to be disconnected and pulled out, then front door removed and totally disassembled to remove the screw to replace the striker latch. lots of work to replace a striker latch. Bad design!
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken latch
My son did the repair, I ordered both latch and striker, only needed the latch...only took him a few minutes to remove the old and install the new and works just fine
My Dishwasher goit damages from broken glass jam pump and clogged drain
Work done" used wet vacuum to remove all water and debris from inside out side dishwasher, used we vacuum to unclog drain, Disconnected drain hose, unplug power cord, water supply line, removed dishwasher, swap all new parts, reconnected everything and done in a zap,
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James M - October 17, 2020
Verified Purchase
was a good try but dishwasher still didnt work the main brain is shot
the parts came in great time very satified
★★★★★
★★★★★
George B - August 9, 2019
Verified Purchase
Easy repair
The part was well packaged with no damages
★★★★★
★★★★★
Terence L - June 26, 2019
Verified Purchase
Success
It was the correct part and YouTube explained well what to do. Worked well and I am now going to fix the fridge. ( another pretty stright forward repair). art came quickly and in great condition. A+ experience.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8690622
Manufacturer Part Number: WD13X10071
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout