Control Assembly 154852501

Hi Conrad, Thank you for the question. If you have power going to the appliance but the panel will not power on, I suggest replacing the Control Assembly. Hope this helps!

Hi Bill, Thank you for your inquiry. If you dishwasher is not turning off after a cycle is complete, then your dishwasher could be stuck in flood mode. What that means is that water has worked it's way down into the base pan below the dishwasher tub causing the unit to do nothing but drain. This is normally caused by the drain being clogged or too many suds in the tub causing the tub to overflow a bit. You will need to uninstall the dishwasher and then tip it forward at a 45 degree angle to drain the water out of the base pan. Once you have done this and reinstalled the dishwasher pour a gallon of water in the dishwasher and see if it drains out and does not wash or refill. If it does you still have water left in the base pan. I hope this helps. Thank you and have a great day!

Hello Ken, Thank you for your inquiry. This part 154852501 is the controls for the buttons and part# 154776601 is the main control board which controls all the functions. Hope this helps!

Hello Peter, thank you for reaching out. We recommend looking into the water inlet valve, part number PS8760080, spray arm, part number PS972316, and dishwasher filter, part number PS11759673. Check for any clogging or blockage, and replace the damaged parts. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.

Hi James, Thank you for your question. If your dishwasher does not start right away, you may have pressed the delayed start button. The dishwasher can be delayed for 2, 4 or 6 hours. If you did not press the delayed start button, you will need to check the control assembly and the door latch with switches. It is normal for a small amount of water to remain in the bottom of the dishwater. This keeps the seals and gaskets lubricated. Usually, about 1 cup of water. If it is more than that, you will need to check the drain pump to see if it is clogged or damaged. We hope this helps with the repair!

Hi Mike, thank you for reaching out. We have concluded that the issue is with the electronic control board, part number PS12365196, which may need to be replaced. We hope this solves your problem!

Hello Richie, thank you for writing. This could be due to a faulty Pump Motor, part number PS3497737 for your model. You may also want to consider this Control Assembly, part number PS8689162 as the cause. Good luck with your repair!

Hi Renhong, thank you for your question. That would be this part: PS12365196. Unfortunately we do not have a video for installation on your model. However we have a lot of videos that may actually help you with figuring out this installation. It is fairly similar between most models and brands of dishwashers. You can view all of the videos that we have on our YouTube channel: https://www.youtube.com/user/partselect/search?query=dishwasher+board. Good luck with your repair.