VALVE W10599356 | Official Whirlpool Part | Fast Shipping | PartSelect
We’re open and continuing to ship packages, however we are experiencing shipping delays. Call volumes are high, please use our self-serve options to cancel or return your order. Learn about our response to COVID-19
https://partselectcom.azureedge.net/Schematics/Whirlpool/EHYXZ2SQ.gif

VALVE

PartSelect Number PS8689091

Manufacturer Part Number W10599356

Manufactured by Whirlpool

Troubleshooting

This part works with the following products:

Washer.

This part works with the following brands:

Whirlpool, Maytag, Amana, Crosley.

Part # W10599356 replaces these:

W10509710.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Jay from SAINT PAUL, MN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
Parts Used:
W10599356
The tub would fill with water from the detergent/softener/bleach dispenser
The repair was easier than the troubleshooting. Figured out the hot or cold water supply valve was failing which allowed water to enter the tub via the dispenser leaving several inches of water on clean clothes or the empty cylinder.

To replace the valve you need to first shut off the hot/cold water supply and remove the hoses. (I took this time to replace the several year old hot & cold water supply rubber hoses with metal braided hoses. I also took a wire brush to the threads of the copper spigot removing any built up corrosion or gunk.) Next you need to remove the 3 1/4" sheet metal screws which secure the top panel of the washing machine. I always take a few pictures of the old part, hose, and connectors just to make sure I replace them in the same locations.

After removing the cover you can use clamp removal/installation pliers, vice grips, or a similar tool to remove the clamps for the hot and cold water to the detergent/bleach/softener dispenser.

Then, remove the electrical connectors on the valve and if you want label them with their locations on the left or right facing the rear of the washer if you want but they are pretty much self-explanatory. They have little retention clips which need to be disengaged in order to be removed from the valve assembly.

Next, remove the hoses and then the three sheet metal screws attaching the valve to back panel of the washer. Install the new valve assembly and then attach the hot and cold water hoses using the clamps to the detergent/bleach/softener dispensers. Then, attach the electrical connectors to the new valve and listen for the clip to engage and gently pull back on the connector (not the wires) to ensure they are properly attached to the valve.

Reconnect the hot & cold water supply hoses from the building pipes and turn-on both spigots or ball valves. Check for leaks and then plug in the washing machine and run a load to test the normal operation. I would leave one piece of dry clothing in the tub after running a load and leave it for a few hours to ensure the new valve is working as advertised.

If there are no further leaks, you are done! Way to go!
1 person found this instruction helpful.
Was this instruction helpful to you?
Nicholette from Antioch, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Parts Used:
W10599356
Plastic had a hole in it
Replaced the whole valve.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS8689091
Manufacturer Part Number: W10599356
Brand
Model Number
Description
Whirlpool
7MWFW72HEDW0
Washer - WASHER
Whirlpool
7MWFW75HEFW0
Washer - WASHER
Whirlpool
7MWFW75HEFW1
Washer - RESIDENTIAL
Whirlpool
7MWFW80HEBW0
Washer - AUTOMATIC WASHER
Whirlpool
7MWFW81HEDW0
Washer - WASHER
Crosley
CFWH4084GW0
Washer - RESIDENTIAL
Maytag
MHW3000BG0
Washer - WASHER
Maytag
MHW3000BG1
Washer - WASHER
Maytag
MHW3000BG2
Washer - WASHER
Maytag
MHW3000BW0
Washer - WASHER
Maytag
MHW3000BW1
Washer - WASHER
Maytag
MHW3000BW2
Washer - WASHER
Maytag
MHW3100DW0
Washer - WASHER
Maytag
MHW3500FW1
Washer - WASHER
Maytag
MHW3505FW1
Washer - WASHER
Maytag
MHW4000BW1
Washer - AUTOMATIC WASHER
Maytag
MHW4000BW2
Washer - WASHER
Maytag
MHW4100DW0
Washer - WASHER
Maytag
MHW5100DC0
Washer - WASHER
Maytag
MHW5100DW0
Washer - WASHER
Maytag
MHW5500FC1
Washer - WASHER
Maytag
MHW5500FW1
Washer - WASHER
Amana
NFW5700BW0
Washer - AUTOMATIC WASHER
Amana
NFW5700BW1
Washer - WASHER
Amana
NFW5800DW0
Washer - WASHER
Whirlpool
WFW70HEBW0
Washer
Whirlpool
WFW70HEBW1
Washer - WASHER
Whirlpool
WFW70HEBW2
Washer - WASHER
Whirlpool
WFW72HEDW0
Washer - WASHER
Whirlpool
WFW7540FW0
Washer - RESIDENTIAL