Install videos!
832644-1-M-Frigidaire-5303937182 -Front Upper Felt Seal with Adhesive
Part Location Diagram of 5303937182 Frigidaire Front Upper Felt Seal with Adhesive
See part 20 in the diagram
Replacing your Frigidaire Washer Dryer Combo Front Upper Felt Seal with Adhesive
832644-1-S-Frigidaire-5303937182 -Front Upper Felt Seal with Adhesive 360 view
( Grid squares measure 1x1 inch )
832644-1-S-Frigidaire-5303937182 -Front Upper Felt Seal with Adhesive 832644-2-S-Frigidaire-5303937182 -Front Upper Felt Seal with Adhesive 832644-1-S-Frigidaire-5303937182 -Front Upper Felt Seal with Adhesive 360 view
Part Location Diagram of 5303937182 Frigidaire Front Upper Felt Seal with Adhesive Replacing your Frigidaire Washer Dryer Combo Front Upper Felt Seal with Adhesive
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Front Upper Felt Seal with Adhesive 5303937182

 Fits your 41771733811!
★★★★★
★★★★★
3 Reviews

Rated by 13 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 19.64
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 41771733811!
PartSelect Number PS832644
Manufacturer Part Number 5303937182
Manufactured by Frigidaire
Product Description

Front Upper Felt Seal with Adhesive Specifications

The upper felt seal for your dryer is attached to the top edge of the drum support area, and is held there by a high temperature adhesive. It creates a seal where the dryer door opens and closes, so that heat remains in the dryer while it tumbles. If your old upper felt seal is coming apart, you notice that hot air is leaking out the dryer door, or your clothes are taking too long to dry, you may need to replace the seal. When you order this part, it comes with the upper felt seal, as well as the required high-temperature adhesive.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Washer Dryer Combo Front Upper Felt Seal with Adhesive

Replacing your Frigidaire Washer Dryer Combo Front Upper Felt Seal with Adhesive
Back to Top
Troubleshooting
This part fixes the following symptoms:
Noisy | Marks left on clothes
This part works with the following products:
Washer Dryer Combo, Dryer, Washer.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Gibson.
Part# 5303937182 replaces these:
AP3579413, 1055093, 134036400, 5303937182
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Luis L - February 8, 2020
  Verified Purchase
Good quality parts
The Parts is OEM quality, seems to be well made, I expect to last long time. Thanks to the videos provided on the website is very easy to replace
★★★★★
★★★★★
Bryan U - February 23, 2018
  Verified Purchase
Upper front felt
Part arrived when expected. Video link in the email was spot on. The old felt came off a bit harder than what was depicted in the video otherwise it was spot on. The only thing missing was the time to dry for the glue. Iwaited a few hours before trying the dryer.
★★★★★
★★★★★
CANDY J - February 16, 2018
  Verified Purchase
upper and lower felt seal
Easy repair. I replaced the lower seal as well as long as I had it apart. The video was extremely helpful.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.9 / 5.0, 13 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisy dryer
Followed instructions for removal and installation.
Other Parts Used:
Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive
  • Timothy from OWINGS MILLS, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer had vibration after couple minutes of running
i read reviews and finally found a person that replace the motor, rear bearing, front top glides, and tension arm/pulley.. i had cleaned the fan motor with a tooth brush best i could the 1 time i had it apart. after the 4th time apart and reading a different review that said replace the fan motor housing/fan. i did and noise gone.
Other Parts Used:
Front Upper Felt Seal with Adhesive Drum Support Bearing
  • Troy from ROYALTON, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DRYER MADE A LOT OF NOISE
Took the top dryer cabinet apart to replace all the above parts plus the dryer belt. Because of its age decide to replace all the parts from the above list.
Three major problems: none of the video reviews showed this type of dryer. Some parts were practically impossible to get back together. Difficult getting the top square. The top of the cabinet picture did not indicate how the top was to be installed.
After 23 hours finally got it back together. Then it would not start. Discovered a wire had come loose. The dryer works fine now.
Read less
Other Parts Used:
Dryer Drum Bearing Bracket Drum Glide - White Heater Assembly Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive Drum Support Bearing
  • Jerry from ROCKWALL, TX
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
High pitched squeal from dryer during use...
Followed directions of another website...had to replace ball and socket joint that attached the drum to the back frame of the dryer...removed top outside metal cover of dryer to facilitate attaching ball/socket kit to the drum...this allowed us to secure the ball/socket kit to the drum without cross threading the screws...with the top of dryer removed this allows you to lift the drum to fit into the plastic bracket...dryer had been in use for over ten years before repair...extreme amount of lint debris throughout internal area of dryer...lint was everywhere...spent a large amount of time vacuuming lint...duct connection from lint trap to lint fan/impeller was very loose and over the years lint seeped out from connection...suggest using duct tape or wood/composite shims to hold the lint duct to the fan/impeller...make sure you remove lint from the back of drum crevice and around the area of the heating element for electric dryers...for sanity's sake this should be a two person job...for this repair we replaced the upper and lower drum felt strip, installed a complete and new ball/socket kit, replaced drum belt, and vacuumed and damp wiped the entire interior of the dryer...
Read less
Other Parts Used:
Multi-Rib Drum Belt Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive
  • Robert from OCEAN SPRINGS, MS
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers, Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer had a terrible squealing & thumping noise
Both my husband and I had watched the videos for the parts we ordered. While we had a small space to work in, the repair on our dryer went fine. We are very happy with the parts we ordered along with the short amount of time it took to arrive. Thank you very much for the videos. Purchasing these parts and having the videos really saved us money compared to having to purchase a new dryer.
Read less
Other Parts Used:
Drum Glide - White Drum Belt Front Upper Felt Seal with Adhesive Rear Drum Bearing Kit
  • Karen from GREENVILLE, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy and clothes getting caught
The repair requires the front panel to be removed. First remove the top by removing two screws in the back of the top panel. Once the top is removed, you have access to all of fasteners for the front panel. I removed the control panel to give myself more room. Simply remove the wire connectors on the panel and two connectors in the upper right of the cabinet. There are four screws that hold the front panel on, two on the inside about a third from the top and two more on the outside at the very bottom. Once the screws are removed, pry the front panel from the machine since there are spring clips holding the panel to the machine. Once the front panel is removed, you have access to the guides and the felts.
Read less
Other Parts Used:
Drum Glide - White Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive
  • John from CHAMPAIGN, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very loud squeaking
Opened top, removed front cover, removed belt, took out drum, replaced bearing on drum and bearing guide on back of dryer. Reinstalled drum and belt, then replaced drum glides and upper felt,let glue set with clamps over night.
Other Parts Used:
Front Upper Felt Seal with Adhesive Rear Drum Bearing Kit Drum Glide - White Drum Support Bearing
  • william from hackettstown, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Making a squiking noise and letting lint into the cavity of the dryer
pulled appliance away from wall and unplugged the electrical cord and then used putty knife to pop up the top. Then removed the screws that held the front in place. Disconnected the wire to the switch on the door and then front on a rug and used acetone and scraper to remove the old glue and felt. Cleaned the area thoroughly and apply the glue that come with the kit an give it a couple of seconds to get tacky and then applied the felt and used clothes pins to hold in place for about an hour and then put back together and let it set over night before using. Had good success and it solved my problem.
Read less
Other Parts Used:
Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive
  • Robert from Rice Lake, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement of broken dryer belt and other parts.
My wife was able to easily do the repair before I could get home from work to do it. She watched the PartSelect video on her iPad as she did the necessary steps to get the belt replaced. We only needed one glide replacement, as one was still attached and intact. We should have purchased both sets of felt seal replacements, though that wasn't as urgent.
My wife thought the repair was quite easy overall.
Read less
Other Parts Used:
Drum Belt Front Upper Felt Seal with Adhesive Drum Glide - White
  • David from Three Rivers, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
terrible shrieking noise and drum stopped moving when under a load
flipped up the top of dryer, turned it 180 so it sat on the washer. next I took out the two screws that held the front panel on. panel popped off and drum came up and then out of bearing assembly. two screws and the bearing assembly came off; it was melted and deformed. The metal on the back of drum was also deformed and worn oblong. then it was back together taking the old piece off watching how it was on the dryer and putting the new one on the same way.
Read less
Other Parts Used:
Drum Belt Front Upper Felt Seal with Adhesive Rear Drum Bearing Kit
  • andrew from Waukesha, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
18 of 356 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tyler
September 24, 2019
Will this work for my Frigidaire dryer? Model number FEQ1442CES0.
For model number FEQ1442CES0
PartSelect logo
Hi Tyler, Thank you for your question. No, this part is not listed under your model number. The part number listed under your model number for the upper front felt seal is PS975866. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Drum Support Bearing
$6.33
$6.33
  In Stock
Rear Drum Bearing Kit
$62.48
$62.48
  In Stock
Lower Front Felt Seal with Adhesive
$19.85
$19.85
  In Stock
Drum Belt
$17.66
$17.66
  In Stock
Drum Glide - White
$28.03
$28.03
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS832644
Manufacturer Part Number: 5303937182
Brand
Model Number
Description
Kenmore
41761712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761722511
Washer Dryer Combo - Laundry Center
Kenmore
41761723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761723511
Washer Dryer Combo - Laundry Center
Kenmore
41761732810
Washer Dryer Combo - Laundry Center
Kenmore
41761732811
Washer Dryer Combo - Laundry Center
Kenmore
41761733810
Washer Dryer Combo - Laundry Center
Kenmore
41764182300
Dryer
Kenmore
41771712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771712511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771712512
Washer Dryer Combo - Laundry Center
Kenmore
41771722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771722511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771722512
Washer Dryer Combo - Laundry Center
Kenmore
41771723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771723511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771723512
Washer Dryer Combo - Laundry Center
Kenmore
41771732810
Washer Dryer Combo - Laundry Center
Kenmore
41771733810
Washer Dryer Combo - Laundry Center
Kenmore
41771733811
Washer Dryer Combo - Laundry Center
Kenmore
41774182300
Dryer
Kenmore
41781042001
Dryer
Kenmore
41781052001
Dryer
Kenmore
41781142001
Dryer
Kenmore
41782042101
Dryer
Kenmore
41782042102
Dryer
Kenmore
41782052101
Dryer
Kenmore
41782052102
Dryer
Kenmore
41782052103
Dryer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Front Upper Felt Seal with Adhesive
$ 19.64
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.