Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RON
June 21, 2019
Dishwasher fills, drain and filters are free of food, circulation pump works, sprayers are unclogged, but it seems water is not being sprayed through the machinein wash cycle. Would the problem be the control module? Part w10539781
For model number WDF750SAYM3
Hello Ron, thank you for writing. You will want to consider either the Turbidity Sensor part PS11757214, the Electronic Control part PS8260225, or the Water Inlet Valve part PS11752927 for your model. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
February 14, 2018
How do I reset the control panel, I think the power flickered and now the heater is not working.
For model number Kdfe104dsso
Hi Ken, Thank you for the question. The board can not be reset. At times during a power surge it can cause the board to malfunction and it will need to be replaced. Hope this helps!
Was this helpful?
Thank you for voting!
Cassie
February 5, 2023
My dishwasher stops washing right after the soap dispenser opens. I am trying to figure out what part needs to be fixed. Dishwasher starts fine, I can hear it fill and spray the dishes. Then it gets quiet, the soap dispenser pops open with a thud, then silence. Front of machine looks like it is running (nothing is blinking). Eventually it the light goes from washing to drying to clean. I open it up, dishes are dirty and soap detergent is on the silverware holder and bottom.
Is it the main control board? What part is it? And can I do it myself? I was able to follow a video a replace the motor pump myself. Please help. Thank you.
For model number WDF750SAYM3
Hello Cassie, thank you for your question. The issue may be the Turbidity Sensor PS12070543. The turbidity sensor measures the amount of transmitted light to determine the turbidity of the wash water. These turbidity measurements are supplied to the dishwasher controller, which makes decisions on how long to wash in all the cycles. If this sensor does not correct the issue then try the Board PS8260225. We do not have a video of this exact main board but our site has many that at similar. Good luck with your repair.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
