Frigidaire/Frigidaire_Thumb/JXNRPXYO.gif
See part 37 in the diagram
Replacing your Frigidaire Range Temperature Sensor play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Temperature Sensor

★★★★★
★★★★★
14 Reviews

Rated by 11 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your EW30EW5CGS5!
 Fits your EW30EW5CGS5!
PartSelect Number PS820208
Manufacturer Part Number 316217002
Manufactured by Frigidaire
Product Description

Temperature Sensor Specifications

The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit you will have to cut off the quick connect, and then wire together with porcelain wire nuts. The function of the oven temperature sensor is to measure the temperature in the oven and signal the other heating components. Before you begin this repair make sure to disconnect the power to the range. The tools required for this installation include a number two Phillips screwdriver or a number two square head screwdriver, and maybe a pair of wire strippers and crimpers.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Oven is too hot | Oven not heating evenly | Will Not Start
This part works with the following products:
Range, Wall Oven, Microwave, Microwave Oven Combo.
This part works with the following products:
Frigidaire, Kenmore, Electrolux, Crosley.
Part# 316217002 replaces these:
AP3363354, 1015027, 08017097, 316111201, 316111203, 318087600, 318198500, 318198510, 318198520, 5303208888, 7316217002
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

77 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Debra
September 29, 2017
My oven won't heat up. The broiler will get hot but the bottom element won't. I replaced the bottom element but it still won't heat up? Help debra
For model number PLEB30S8CCD
Hi Debra, Thank you for your inquiry. If the bake element is not coming on then you will likely need to replace the temperature sensor. I hope this helps. Thank you and have a great day!

37 people found this helpful.

Was this helpful?
Thank you for voting!
LEWIS
March 4, 2019
Oven and broiler elements will not heat up. I thank everything else works ok. What do i need to replace?
For model number GLED388DSA
Hello Lewis, thank you for your question. It sounds like it might be the sensor probe or the control board. The oven is controlled by the electronic control board, and thermostat or sensor probe. The I suggest testing the sensor with a Ohm Meter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. You can also test the elements for continuity to be sure they are both functioning. If the sensor and elements are tested and are functioning correctly the electronic control board would be the issue. Good luck with your repair!

29 people found this helpful.

Was this helpful?
Thank you for voting!
Rob
August 22, 2017
Turn the oven on to pre-heat and after a short time (10 mins?), i get an f10 error code on the control panel and oven is very hot! Temp sensor or control panel issue? Thanks! -rob
For model number FGES3045KFA
Hello Rob, thank you for contacting us. The sensor is a common part to cause that code. You can test the sensor with a multi-meter to determine if it is at fault. If the readings are good then the next part would be the electronic control board PS2368652. Hope this helps!

24 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Herman
October 10, 2017
When we turn on oven it displays code DR
Hi Herman, Thank you for your question. The DR error code just indicates that there is a miscommunication between your control board and the rest of your appliance. I would suggest unplugging your appliance for about 5 minutes. That may reset the board and fix your issue. Good luck with your repair.

12 people found this helpful.

Was this helpful?
Thank you for voting!
Damion
April 25, 2018
Oven and broiler doesn't come on. I replaced the heating element and it still doesn't work. What could I be missing here?
For model number FFEF3010LBD
Hi Damion, Thank you for the question. If both the top broil and bottom bake element is not heating, I suggest replacing the Electronic Clock/Timer, PartSelect Number: PS1146103. This part acts as a oven controller. Hope this helps!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Betty
November 6, 2017
About a month ago my oven over-heated and burned things to a crisp. I ordered a new probe for it and it worked again, but seemed to run on the hot side. It just over-heated again and burned my food. What is causing this and what part do you recommend? I think it read error f10 before i disconnected the electricity.
For model number LGEF3045KFH
Hi Betty, Thank you for your question. If the oven is over heating the part that fixes the issue the majority of the time is the oven temperature probe. If the new part is malfunctioning, I would use a multimeter to check the continuity of the probe as well as the wiring between the probe and the electronic control board and the electronic control board to verify which of these parts is causing the issue. I hope this helps. Thank you and have a great day!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Mickey
August 28, 2017
Oven and broiler will not heat up.
For model number FEF450BWC
Hi Mickey, Thank you for the question. If both the bake and broil element are not turn on at all, we suggest you replace the Electronic Clock with Overlay - White. Hope this helps!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
S
November 22, 2019
After 30-40 minutes of cooking my oven beeps and displays f3. It takes 20-30 minutes before i can reset and continue cooking.
For model number 911.41065
Hi S, thank you for your question. There are a couple parts that could cause this issue in your appliance. First you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
DON
September 21, 2017
Hi, I have a 2004 Frigidaire pro series double oven that the upper broiler element won't heat up on. If I turn on just the upper oven itself the lower burner heats up but not the top element (lower broiler and oven work fine). The upper oven portion heats up just not the broiler part element. I just replaced the element with a new one from you guys (thanks for the quick shipping) and the broiler still wont heat up. Could it now be the oven temperature probe (part number 316217002) that needs to be replaced? Thanks don
For model number PLEB27T8CCB
Hi Don, Thank you for the question. It sounds like it might be the probe sensor or the control board. I suggest testing the sensor with a Ohm Meter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Stephanie
October 30, 2017
I have a 40", duel fuel, 2 oven range. Using an oven thermometer, each oven is about 50 degrees off. To bake at 350 degrees, i must set the ovens to 400 degrees. What do i need to fix this problem?
For model number FPDF4085KFA
Hi Stephanie, Thank you for your question. I would suggest testing your oven thermostat. It could be that it is reading the wrong temperature inside of your oven. I hope that helps. Good luck with your repair.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Frigidaire Range Temperature Sensor

Replacing your Frigidaire Range Temperature Sensor play video
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 11 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Oven not heating to desired temperature
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
  • Dan from Bellevue, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
145 of 218 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not maintain correct set temperature.
Removed electrical connector and two screws. Attached the electrical connector to the new probe and attached with the two screws.
  • Barbara from RAINBOW CITY, AL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
15 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn’t get up to temperature
I removed the sensor from inside the oven with a 1/4” nut driver, pulled the sensor out slowly and then took the connection apart and found out that the connector was different, I cut the connector off of the oven side and then cut the connector off of the new sensor and wired it together. I am still trying to find the ceramic nuts. My oven is working for now. Very easy fix, just wish there were ceramic wire nuts with the new sensor
  • Al from THORNTOWN, IN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thermostat. Didn’t cut off at set temp
Phillips screwdriver used to remove 2 screws at top left in oven. Pulled thermostat out until I could get to the connector. Used pliers to hold wire, reconnected new plug , threaded it back into back of oven and reattached the two screws.
Saved $150 on a service repair call.
  • Everette from HARRISBURG, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would start to heat then quit,checked the temperature sensor with ohm meter after cool down reading about 1100 ohms. I cleaned connection tried it again seemed to work well but quit again in just few days.
Pulled range out from cabinet, removed back plate, two screws inside oven attaching the temp sensor. Then pulled the sensor and wire through from back. Reverse to replace about Ten minutes
OEM parts plug in same, works great
  • Ronald from FOREST HILLS, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Error Code F1
I usually try the cheapest part to replace when I come to a fork In the road but I wasn't home at the time and my other half called in the "expert". He said it was the clock timer and it would be $450 to replace it. She sent him away and I bought one online for $200 and put it in only to find out that it didn't solve the problem. Did some reading and found out that it could be the sensor. Put an ohm meter on it and found that to be the problem. Left the new clock timer in it anyway so now we're good for another 100,000 cookies or 1000 pizzas, which ever comes first
  • Jon from Little Silver, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would overheat and not control properly
Simply took oven out of wall, removed back plate, unplugged old sensor, went in the front and unscrewed old sensor, put in new sensor, went in back and plugged in new sensor, put on back plate, push oven in wall. Turn on power
  • Mason from WESTVILLE, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Temperature in the oven was not consistent
1. Turn off power to the electric oven
2. Removed the two screws in the top side of the oven that hold it into the cabinet.
3. Made a support to set the oven on once you remove it from the wall. Or set it on the floor. You will need help this is not a one person job.
4. Used a Philips head screw drive removed the back of the oven panel. I did not have to remove the whole thing just took out half the screws and the electrical plug for the temperature sensor is right on the edge.
5. Unplugged sensor
6. Took out the two screw on the inside of the oven that holds the thermal sensor in place. Pulled it out the front.
7. Side the new thermal sensor in place replace the screws.
8. Pull the plug out and plug it back in. Check and push the insulation back in place where the thermal sensor.
9. Replace the back and replace the screws.
10. Slide oven back into the wall.
11. Replace the two screws that hold the oven in place in the frame.
12. Turn power back on
Check the temperature
  • Cheryl from PRAIRIEVILLE, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When oven was set at 400, actual temp would run about 285.
1 Turned off the oven breaker.

2. Removed the oven racks.

3. With a Phillips screwdriver, removed the mounting screws holding the temperature sensor and unplugged it.

4. New sensor plug did not match 20 year old connector. Had to cut and solder splice the connectors.

5. Installed the new sensor and now oven holds temperature steady.

Easy order, quick delivery and easy installation, happy wife.
  • James from MOBILE, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven not reheating after initial heat up
unscrew the sensor inside the oven; took off the back of range to access harness of sensor; the replacement part harness did not match up to the original, so we stripped the clip from the end of the part and also the end of the harness in should clip into. after joining the wires together with ceramic wire nuts we tested the oven to make sure all worked AND IT DID!
  • christine from addison, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
3.6
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    3
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS820208
Manufacturer Part Number: 316217002
Brand
Model Number
Description
Frigidaire
4281
Range - ELECTRIC RANGE
Tappan
57-2709-00-06
Microwave Oven Combo - Electric
Tappan
57-2709-00-07
Microwave Oven Combo - Electric
Tappan
57-2709-10-04
Microwave Oven Combo - Electric
Tappan
57-2709-10-05
Microwave Oven Combo - Electric
Tappan
57-2729-00-02
Microwave Oven Combo - Electric
Tappan
57-5709-10-03
Microwave Oven Combo - Electric, Wall
Tappan
57-6709-00-03
Microwave Oven Combo - Electric
Frigidaire
74403
Range - DUAL FUEL RANGE
Kenmore
79030172400
Wall Oven - GAS WALLOVEN
Kenmore
79030172401
Wall Oven - GAS WALLOVEN
Kenmore
79030179400
Wall Oven - GAS WALLOVEN
Kenmore
79030179401
Wall Oven - GAS WALLOVEN
Kenmore
79030472400
Wall Oven - GAS WALLOVEN
Kenmore
79030472401
Wall Oven - GAS WALLOVEN
Kenmore
79030472402
Wall Oven - GAS WALLOVEN
Kenmore
79030473400
Wall Oven - GAS WALLOVEN
Kenmore
79030473401
Wall Oven - GAS WALLOVEN
Kenmore
79030473402
Wall Oven - GAS WALLOVEN
Kenmore
79030473403
Wall Oven - GAS WALLOVEN
Kenmore
79030474400
Wall Oven - GAS WALLOVEN
Kenmore
79030474401
Wall Oven - GAS WALLOVEN
Kenmore
79030474402
Wall Oven - GAS WALLOVEN
Kenmore
79030479400
Wall Oven - GAS WALLOVEN
Kenmore
79030479401
Wall Oven - GAS WALLOVEN
Kenmore
79030479402
Wall Oven - GAS WALLOVEN
Kenmore
79030522800
Wall Oven - WALL OVEN
Kenmore
79030522801
Wall Oven - WALL OVEN
Kenmore
79030529800
Wall Oven - WALL OVEN
Kenmore
79030529801
Wall Oven - WALL OVEN

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service