Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kent E - November 23, 2019
Verified Purchase
Poor quality control
The mounting screw hole were not threaded. I had purchase a thread tap to make the threads. Once threaded it works fine
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
January 20, 2018
How to remove the door to replace the hinge's ??
For model number GLEF378ASG
Hello Dan, Thank you for your inquiry. You will need to remove the door from the unit by opening to the first stopping point then lift the door straight off the hinges. Then remove the hinge opening cover by removing the screw and lifting off. You will then need to remove the 2 screws holding the hinge to the front frame. Collapse the hinge, push down and tip the bottom of the hinge toward the back of the range. When the top of the inner hinge goes below the opening in the frame then pull the hinge out. Hope this helps!
Was this helpful?
Thank you for voting!
Willie
November 21, 2018
I have a Kenmore elite oven and i need to replace the oven door hinges. How do i remove the oven door?
For model number 79079014102
Hello Willie, thank you for your question. Try the following steps. Open door to the BROIL POSITION, where you feel hinge catch slightly. Place your hands on both sides of the door near the handle.
Lift the door up and away from hinges. I hope this helps!