The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Crosley.
Part# 154465901 replaces these:
AP3220131, 1014441
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher would not cycle off
removed the screws holding the access panel from the front of the dishwasher and then repoved the control knob to get to the two screws holding the timer in placem removed wiring harness from timer , removed old timer and install the replacement timer in reverse order.
Frank from Florissant, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was stuck in cycle
I had to replace the dishwasher timer...Open dishwasher door and removed screws that hold front panel on to access control panel. Remove timer knob from from front of dishwasher (Just pulls off) and unscrew two screw that hold timer on. Unplug timer, replace with new time and everything goes back the same way it was taken apart.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Earl
February 2, 2018
Heat cycle won't cut off. Is this the timer?
For model number FD8510LCS3
Hi Earl, Thank you for the question. If the appliance continues to run, the time is not advancing. The timer will need to be replaced. hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
April 28, 2018
Water will enter in all 3 (heavy, normal, light) but it will not wash. It will drain, and the heating element comes on. Two days ago it stayed in heating/drying cycle until i realized that and manually turned control knob to off. Question: Is this probably the timer needing to be replaced?
For model number fdv510lcb0
Hello Larry, thank you for your question. The issue could be the timer, not advancing, or the Pump/Motor Kit with Harness Manufacturer Part Number 154859101 .The pump/motor kit is the part that circulates the water through the unit to wash the dishes. I would recommend testing the motor and timer to determine which part is faulty. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jay
January 14, 2018
Does this part (timer) control how long drain pump runs.
For model number Ps815994
Hello Jay, Thank you for your inquiry. It controls the length of the cycles, it's usually the main control board taking information from the pressure sensor and other input that will control how long the drain pump runs. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
