Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Franco G - November 19, 2023
Verified Purchase
Exactly what the problem was, easy repair.
The part was an exact match, I’ve used Parts select a few times before for all of my appliances and it’s always on point. Glad that a site like this exists for DIY’rs like me.
★★★★★
★★★★★
Daymian B - October 13, 2019
Verified Purchase
Worked as expected!!!
It was a new part, almost exact replacement and my dishwasher is back in working condition.
★★★★★
★★★★★
Robert D - April 21, 2019
Verified Purchase
Worked just fine
Part arrived quickly. WAS easily installed. Solved the no start problem and saved hundreds of dollars. Thank you PartSelect.
★★★★★
★★★★★
Ronald C - July 18, 2018
Verified Purchase
Did not Resolve the Problem - See Explanation
Dishwasher problem - Upon pressing the Start button, water would fill but the wash cycle would not begin. Suspected the door switch(es) and so ordered this part. Part fit perfectly, But the problem was not resolved. Left this new switch installed and ordered the control module. Another perfect fit, and, bingo, it resolved the problem. Though I had an unneeded part, the money spent (about $180) was far less than buying a new dishwasher. Nice work, PartSelect.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher was stopping mid-cycle and beeping every 15 seconds (as if the door had been opened)
I watched this video: https://www.youtube.com/watch?v=-k0iZGwMOGc And then I did exactly what it said! It was easy. Plus, when I opened the panel I could see the old switch interlock assembly was melted on one side, so I knew I had gotten the right part!
Anna from BRIDGEPORT, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was not starting
Replaced interlock assembly as one of the possible causes. The replacement was easy, but this was not the final fix. I also replaced the water inlet valve, flood switch and finally found that there was large calcification within the drain tube assembly (not visible, but was blocking water). Got a new flexible tubing and new drain hose,
... Read more plugged everything together and the dishwasher runs like new now. Watching for a potential leak from the drain tube to drain hose connection and mya need to tape it up, but so far so good...
Read less
Prasad from LEAWOOD, KS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
January 24, 2018
I have identified the part (i think) i need. It is the switch interlock assembly. It looks like it is hard wired in the dishwasher or does it have wire plugs? Thanks!
For model number PDW8280JO3SS
Hi Wayne,
Thank you for your question. Before you begin any repair please turn the power supply off to your dishwasher. To replace the interlock switch assembly, your first step is to remove the screws securing the inner and outer door panels together. Once the screws have been removed separate the 2 panels. Now close the inner panel and secure it with the latch. Remove the mounting screws securing the old door switch assembly and release it. Unsnap the cover and remove the 2 switches. Disconnect the wires and set the old switches and housing aside. Install the new door switch assembly by first unsnapping the cover and removing the door switches. Connect the wires to the new switches and position the switches in the housing and then snap the cover closed. Position the new assembly on the outer door panel and secure it with the screws. Realign the inner and outer door panels and secure them with the screws. Restore power to the dishwasher and the dishwasher should now work for you. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Joey
April 4, 2018
I just replaced the float switch because it was malfunctioning(no continuity when activated). Now when i close the door and try to start a cycle the breaker trips. Any suggestions please on where to start trouble shooting? Thanks
For model number GE Profile PDW7880G00SS
Hi Joey,
Thank you for your question. If the dishwasher is tripping the breaker, it could be caused by a number of things. If the dishwasher is plugged into a ground fault circuit interrupter (GFCI) and the outlet senses a circuit overload, it will cause the circuit to trip. Always make sure it is plugged into a regular outlet. If water is leaking from the dishwasher or there is excess humidity coming from the dishwasher will cause the breaker to trip. There may be an issue with the dishwasher power cord. If there is a short in the power cord or any exposed wires, then the breaker will trip. Faulty wiring in the dishwasher will cause the breaker to trip. Also, check the circuit breaker itself, to see if there are any issues with it. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joey
April 5, 2018
Hi again, i have no power reading at two-terminal harness at pump. I do have continuity between terminals on pump and the harness. I do get a power reading(120v) between one terminal on harness and dishwasher metal body. Could this be a control board issue or possibly the door switch? Unit not tripping breaker now, but dishwasher will not run a full cycle, lights/timer go off on led screen. Still not getting water, so maybe something is heating up and shutting unit down. Suggestions? Thanks
For model number PDW7880G00SS
Hi Joey,
Thank you for your question. If the other parts are working correctly, then you should test the door switch and the electronic control board to see if these parts are causing the issue. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jay
September 12, 2019
Do you have an instruction video for replacement of my dishwasher switch interlock assembly (ps783632)?
For model number PDW77000
Hi Jay, Thank you for your question. Unfortunately we do not, but in a previous Q&A we did provide instructions: Before you begin any repair please turn the power supply off to your dishwasher. To replace the interlock switch assembly, your first step is to remove the screws securing the inner and outer door panels together. Once the screws have been removed separate the 2 panels. Now close the inner panel and secure it with the latch. Remove the mounting screws securing the old door switch assembly and release it. Unsnap the cover and remove the 2 switches. Disconnect the wires and set the old switches and housing aside. Install the new door switch assembly by first unsnapping the cover and removing the door switches. Connect the wires to the new switches and position the switches in the housing and then snap the cover closed. Position the new assembly on the outer door panel and secure it with the screws. Realign the inner and outer door panels and secure them with the screws. Restore power to the dishwasher and the dishwasher should now work for you. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
October 19, 2023
The front display does not turn on when door is closed, and washer does not turn on. BUT i do hear the beep when door is closed. Can the interlock switch still be the problem?
For model number Pdw7880g0ss
Hello Frank, thank you for reaching out. Yes, the issue could be due to a faulty door switch, part number PS783632. Good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
