783533-1-M-GE-WB16K10043 -Burner Bake Tube
Part Location Diagram of WB16K10043 GE Burner Bake Tube
See part 217 in the diagram
783533-1-S-GE-WB16K10043 -Burner Bake Tube 360 view
( Grid squares measure 1x1 inch )
783533-1-S-GE-WB16K10043 -Burner Bake Tube 783533-2-S-GE-WB16K10043 -Burner Bake Tube 783533-1-S-GE-WB16K10043 -Burner Bake Tube 360 view
Part Location Diagram of WB16K10043 GE Burner Bake Tube
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Burner Bake Tube WB16K10043

★★★★★
★★★★★
3 Reviews

Rated by 4 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 41.49
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS783533
Manufacturer Part Number WB16K10043
Manufactured by GE
Product Description

Burner Bake Tube Specifications

This item no longer comes with the igniter.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Will Not Start | Little to no heat when baking
This part works with the following products:
Range.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB16K10043 replaces these:
AP3418777, 1021635, WB16K10043, WB16K0027, WB16K27
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Shawn B - August 21, 2021
  Verified Purchase
Was close but different
Got this to replace mine since it burned a hole thru the side of it, but it's slightly different the mounting bracket for the ignitor on mine comes up from the bottom and this one from the top. Serial numbers matched for the oven but they must have changed it.. I'll have to get a new ignitor for this one to work...other than that it fit well
★★★★★
★★★★★
Jesse R - February 5, 2019
  Verified Purchase
Simple fix but get the right parts.
This part fit as advertised but be aware that if you are installing this in an older oven that the igniter that you have may not fit this burner tube. I suggest replacing both at the same time so that you have the correct parts.
★★★★★
★★★★★
Enita W - January 30, 2019
  Verified Purchase
Easy to replace in a short about of time.
The part was in good condition.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner was bad and gas pressure valve stuck open.
Shut off gas, bled excess and simply removed old defective parts and replaced with new exact replacement parts. Made final air adjustments after first checking for gas leaks. No problems at all. A good rainy day job!
Other Parts Used:
Single Gas Pressure Regulator and Safety Valve Assembly Burner Bake Tube Flat Style Oven Igniter Kit
  • Chuck from WESLEY, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old burner bake tube was burned out in 1 spot.
New bake tube fit perfectly.
  • Barry from NORTH BANGOR, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not light.
I had to pull the drawer to get to the burner, then remove the heat shield to get to the connections. I took out the screw at the end of the burner tube, then the two screws holding the tube to the back wall. I had to pull the connections through the back wall of the oven, and disconnect them. I then removed the two screws holding the igniter to the old tube, and used them to connect the new igniter to the new tube. At that time, I also had to cut the old connections off of the old ignighter, and put them on the new one. I also had to redo the connection to the gas valve at the bottom of the tube. I then put all the wire and connections back through the hole in the back of the oven, connect the tube back to the rear of the oven, and the single screw to hold the end of the tube. I replaced the the heat shield, and tested. Everything worked fine.
Read less
  • D.W. from Jasper, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
26 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven was popping house breaker on ignition.
Removed oven racks, oven floor tray and shield to access burner. Initially began to replace only electric igniter (just two screws) and burner break valve but noticed burner tube was corroded and had large hole near igniter. Ordered a new burner pipe. Hardest part of this repair was the burner valve. It has a compression fitting to the aluminum supply tube that needs to be seated well without bending the tube. The electrical connectors (2) have plastic shields on them that are somewhat brittle, perhaps because the oven is about ten years old. Had to be very gentle with them when swapping them from old valve to new so as not to crack the plastic.
The real trick was figuring out that the valve break needed to be adjusted for LP supply. It shipped configured for natural gas. Upon initial install the flame level in the oven was much to high. After asking around I discovered that the brass nozzle needs to be tightened down clockwise with a wrench until flush with the base in order to set it for LP.
Read less
Other Parts Used:
Burner Bake Tube TUBE Valve SUP
  • DAVID from SOUTHAMPTON, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
15 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Flat Style Oven Igniter Kit
$62.23
$62.23
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS783533
Manufacturer Part Number: WB16K10043
Brand
Model Number
Description
Kenmore
36261111699
Range
Kenmore
36261118699
Range
Kenmore
36261120101
Range
Kenmore
36261120102
Range
Kenmore
36261120103
Range
Kenmore
36261120104
Range
Kenmore
36261121890
Range
Kenmore
36261121891
Range
Kenmore
36261121892
Range
Kenmore
36261121893
Range
Kenmore
36261121894
Range
Kenmore
36261121895
Range
Kenmore
36261121896
Range
Kenmore
36261128890
Range
Kenmore
36261128891
Range
Kenmore
36261128892
Range
Kenmore
36261128893
Range
Kenmore
36261128894
Range
Kenmore
36261128895
Range
Kenmore
36271112000
Range
Kenmore
36271112001
Range
Kenmore
36271117000
Range
Kenmore
36271117001
Range
Kenmore
36271161691
Range
Kenmore
36271168691
Range
Kenmore
36271171890
Range
Kenmore
36271171891
Range
Kenmore
36271178890
Range
Kenmore
36271178891
Range
Kenmore
36271330200
Range
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Burner Bake Tube
$ 41.49
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.