MOTOR,DC EAU59551204

Hello Steve, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS7791867. Hope this helps, good luck with this repair!

Hello Cassandra, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS7791867. Good luck with the repair!

Hello Joe, Thank you for contacting us. To remove the panel, you need a putty knife with masking tape on the end to prevent scratches. Use the putty knife to first remove the drip tray by lifting up on the tabs. Then use the putty knife around the edges of the panel (there are tabs around the edges that need to be released). You should then be able to pull the display cover off. Good luck with your repair.

Hello Rick, thank you for your inquiry. Before replacing the solenoid, we would recommend checking the dispenser door motor, part number PS7791867, to solve the problem. It opens and shuts the ice door on the ice dispenser chute. We hope that helps!

Hello Don, thank you for your question. If the compressor is running but not cooling we would recommend checking the temperature sensors, evaporator fan motor and damper to be sure the air is getting into the unit from the freezer. Also check the evaporator behind the back wall of the freezer to see if there is ice buildup on the coils. If there is ice there you should check the defrost heater and thermostat. I hope this helps.

Hello Jenna, Thank you for the question. This could be an indicator the Water Filter needs to be replaced. If the Filter is over 6 months old it should be replaced. If the Filter has been replaced, you may have a defective Water Inlet Valve. We hope this helps!

Hello Ronald, thank you for your inquiry. Ice that has sat around for a while will tend to fuse together into a great big clump due to its own weight. Or, it could be your refrigerator display has been locked, it will not dispense water or ice. Press and hold the lock key on your display for 3 seconds to unlock. Make sure there is ice in the ice bin. Make sure the refrigerator doors are completely closed when trying to dispense.

Hello Dino, Thank you for your inquiry. We have researched the model number that you have provided and would recommend testing the motor with a multimeter to see if it is causing the issue. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We also recommend checking the dispenser door cap and lever spring for any visible damage or debris. Good luck with your repair and if you need assistance with placing an order, please do not hesitate to call our customer service. We look forward to hearing from you.

Hi Jocelyn, thank you for the question. The CFE error code means the condenser fan motor is not turning. You want to check the condenser fan motor, part number PS16662422, to see if it is working correctly and to replace it if it is not working. We are sure this will help!

Hi Dale, Thank you for your question. You will have to gently pry off the dispenser housing to get to this motor. You can do that using a putty knife. Start at the bottom on your housing and then do the top and it should pop out. I could suggest putting a piece of masking tape over the knife, so you do not scratch your appliance. Good luck with your repair.