Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stan B - May 12, 2021
Verified Purchase
Right part. Perfect fit
Worked perfect. Fixed the problem.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Adam
September 5, 2021
The dishwasher does not dry dishes. The unit cycles through the "dry" cycle very quickly. The heating element does not get hot. Resistance across the heating element measured 15 ohms and the high limit thermostat measured 0.0 ohms. Could the computer be at fault?
For model number FGBD2531KF1
Hello Adam, Thank you for the question. This could indicate the Control Board is not cycling properly and needs to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Guy
November 11, 2021
Dishwasher wont dry dishes. Element and high limit test good. Any suggestions, please and thank you.
For model number FGBD2435NW0A
Hello Guy, Thank you for the question. If you are using Rinse Aid, we suggest checking the Dispenser to make sure the cap is opening and allowing it to dispense. We hope this helps!
This dishwasher just stoped working. No lights no noise. I replaced the latch because it was easy but that did not work. I belive it may be the computer board is that a high posibility. Thanks dan
For model number FGBD2435NW0A
Hello Daniel, thank you for your question. If you're not getting any power to the unit at all, no lights or sounds and the latch has already been replaced the most likely issue is the main control board for the unit. I would recommend replacing the Electronic Control Board 807024501. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
