Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Katrina S - August 27, 2019
Verified Purchase
Easy repair
Great Customer service and fast shipping. Part was easy to install (water tube for refrigerator) I no longer have a leaking fridge!!!!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water Leak
The inlet valve on my Frig had compression fittings, very easy to use. The part I recieved was threaded, very difficult to find the correct fitting for water line hose 3/8 on inlet side 5/8 on hose side. In the end, I cleaned up old valve, bought a new braided line for house service to frig and the leak has stopped. Not sure if cleaning v
... Read morealve or new line fixed issue but no leaks. Company shipped part as directed with no issues. Thanks, Dave
water lines to ice maker and door dispenser replacement
replacing the lines was easy, problem was the drawing on line and the parts list did not show two different size tubing used. had to run out for the 5/16 inche tubing for the water dispenser in the door. got the 1/4 inch tube done in 5 minutes.
Disregard previous. 1. Turn off water supply. 2. Unplug power cord. 3. Remove bottom Panel to access the Solenoid valve. 4. Remove the water lines from the Valve. 5. Remove the Valve from the refrigerator. 6. Remove the electrical connectors from the valve. (make sure the new valve has the connector adap
... Read moretors included) you will need them during installation. 7.Bend the new valve bracket inward about 45 degrees to clear the compressor coolant line. 8.Use a pair of pliers to braek away the plastic on the new valve for clearance. 9.If needed remove the compression fitings from the old water line installation as the new valve comes with the push and lock feature. 10.Install the bottom 2 water lines they are different sizes 11.Mount the new valve to refrigerator and tighten. 12.Install the ice maker water line to the top fitting on the valve. 13.Plug the power cord in & turn on the water supply,check for leaks and proper operation on the valve.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
August 19, 2019
Water is leaking from tube to the ice maker. Have new tube, how do you disconnect old tube from the single outlet valve and connect the new hose?
For model number GTS18WCMDRCC
Hello John, Thank you for the question. You should be able to pull the tube from the valve coupler. Hope this helps!
Was this helpful?
Thank you for voting!
Alistair
August 10, 2021
I am not able to pull the old tube out of the connector at the back of the freezer. Do I buy a connector for this pet and cut the old tube a bit below the connector to attach? Do I need to also replace the connector that goes in the back of the freezer?
For model number PTS22SHSARSS
Hello Alistair, Thank you for the question. The connector and the tube are sold as one piece and need to be replaced together, PartSelect Number PS895283. We hope this helps!
Does this hose supply water to the ice maker? The one on my frig is clear/ white/ opaque...the one in this picture looks black. mine is 1/4 in...seems like it should do the trick, right?
For model number TPS24BPD-BS
Hello Jen, thank you for your question. Even though the color of the tube is different this is the OEM replacement part for the Ice Maker Water Line part number WR17X11349 . This is the water line that takes water from the valve to the icemaker itself. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
