This part is the replacement ice funnel for your refrigerator. It is made of white plastic and is sold individually. The funnel is approximately 7 inches wide and 8 inches long. The ice funnel has a paddle that, when pushed by your glass, activates the dispenser and releases ice or water through the funnel. If your refrigerator is not dispensing water or ice, you may have a damaged ice funnel. This is an authentic OEM part sourced directly from the manufacturer.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joseph L - February 24, 2022
Verified Purchase
Simple and easy PERFECT PART too.
Part was in perfect condition. Packaging was good. Shipping was fast and reasonable cost. There is a reason I keep their fridge magnet on the front of my refrigerator. Used this website before, will continue using. I researched other websites, this website AND prices are the best.
★★★★★
★★★★★
Michael B - February 12, 2022
Verified Purchase
Very easy
Part fit perfect and took no time at all to install. Thanks
★★★★★
★★★★★
Peter K - May 29, 2019
Verified Purchase
The part came in when expected in good condititon.
The instruction for installing the part was easy to read and understand. It took only a few minutes to install
★★★★★
★★★★★
Todd T - November 16, 2018
Verified Purchase
Perfect replacement
Part worked as expected.
★★★★★
★★★★★
Richard M - March 22, 2018
Verified Purchase
Straightforward repair.
Quick delivery and perfect retrofit... very simple 15 minute repair.
★★★★★
★★★★★
Jean A W - February 20, 2018
Verified Purchase
Easy Repair - be careful with the clip on the back
everything went smooth except the plastic will break. I broke a little tap taking the electric sockets off but it works fine. Also make sure the tab on the back of the funnel goes behind the the metal tab when you insert the funnel back into the refrigerator.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
This Model is a LEMON (on-line for compliants). Numerous Problems
Removed front cosmetic panel on freezer door. Removed display. Removed display by pressing down and then out. Removed 4 screws holding display panel and then removed. Removed dispensing Funnel. Installed new dispensing funnel onto new funnel extension. Installed aforementioned using reverse procedure of dispensing funnel removable. Rre-
... Read moreenstalled display panel and display. Replace cosmetic panel on freezer door. Works fine.
First I removed the front cover (pried a screwdriver gently under the bottom plastic seal between housing shield and front cover, it came off nice and easy without damage). Removed electrical plugs from electronic board (front cover) so that it did not hang from the wires and get it the way. Then removed four screws holding housing s
... Read morehield on. Removed housing shield, first observing with new parts next to me how it came apart. And then disassembled funnel from shield. Simple but being careful is the key to putting the new unit together as with any plastic parts it's easy to snap if forced. Replaced all parts in reverse order removed. This is a good time to clean all parts for any mold build up that could not be reached otherwise. Parts select personnel were courteous and very helpful. Especially when I almost ordered the wrong color parts. Ask questions if not sure.
plastic got hot and distorted grandchild turned light don and itgot the parts very hot .
simply removed the parts, and replaced the new parts and disconnected the light switch so it only comes on when using the dispenser and goes off by it's self.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wendy
January 27, 2022
my Hotpoint side by side refrigerator has a broken ice/water dispenser. mine doesn’t look like the ones I am finding in your website. is a replacement part available? this is the type where pushing back on the chute triggers the dispenser. the part the dispenser arm goes into has broken.
For model number HSS25ATHWW
Hello Wendy, thank you for your inquiry. The issue you are asking about has a combination of items and not an assembly. Funnel Ice Dispenser PartSelect Number PS1483300, Refrigerator Ice Dispenser Lever PartSelect Number PS1483305, Dispenser Door Recess Crank PartSelect Number PS291908. You may also call in to speak with an agent at 888-260-4310. We hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Deb
February 19, 2018
The ice funnel is sitting crooked and can only push from way up top of it with the glass to dispense water or ice. How do i fix it?
For model number GSH25TFXB
Hi Deb, Thank you for the question. Only way to have it fixed would be to replace the funnel. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
