16729246-1-M-GE-WE03X32037-BELT DRIVE
Part Location Diagram of WE03X32037 GE BELT DRIVE
See part 3220 in the diagram
( Grid squares measure 1x1 inch )
16729246-1-S-GE-WE03X32037-BELT DRIVE 16729246-2-S-GE-WE03X32037-BELT DRIVE 16729246-3-S-GE-WE03X32037-BELT DRIVE Part Location Diagram of WE03X32037 GE BELT DRIVE
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

BELT DRIVE WE03X32037

★★★★★
★★★★★
3 Reviews

Rated by 3 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 59.20
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS16729246
Manufacturer Part Number WE03X32037
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer.
This part works with the following products:
General Electric.
Part# WE03X32037 replaces these:
WE12M24, WE12M9, WE12X0079, WE12X79
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Levi L - July 13, 2022
  Verified Purchase
Belt was perfect
Fast shipping and the right part
★★★★★
★★★★★
Philip H - April 6, 2018
  Verified Purchase
Drive belt for GE Spacemaker dryer
Part is OEM and works like it should. Easy to install. Probably should include tensioner pulley, if one must purchase drive belt.
★★★★★
★★★★★
Janette M - February 26, 2018
  Verified Purchase
Part was just as expected. Repair was a success!
The part was just as expected. Arrived in the time frame I requested to be shipping. Repair was a success!
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner was not working and dryer belt broke
Dryer removed the screws from the back and top and front only one side where the motor
Other Parts Used:
Radiant Surface Element - 11 Inch BELT DRIVE
  • Mike from East windsor, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tub wouldn't rotate,also motor wouldnt stay running
please unplug power cord for safety reasons, remove the 2 screws on the top back of the machine. this will allow for removal of the top lid. Next you will need to remove the cycle knob, then remove the panel cover on the front top of the Dryer, this is necessary to access the 2 screws on the front, these are Robertson head screws but a #2 Phillips will work. loosen both left and right screws note to not completely remove them. pick up on the front panel then lean the top forward. this will give ample room to install the new belt, once the belt is placed over the tub you can reassemble the front panel, cover, and knob. on the back of the dryer towards the bottom there are 2 more #2 phillip screws that need to be removed to get to the tensioner, pull the belt down and around the tensioner and then around the pulley of the drive motor, rotate the drum a few times to ensure the belt is aligned properly with the motor pulley then replace the rear cover tighten all screws. Plug in the dryer and give it a test drive to make sure the belt was the only issue
Read less
  • John from MILFORD, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Pulley And Broken Belt
I took the dryer rear and bottom panels off after removing a total of 6 screws . I then put on a new belt and pulley after removing the dryer drum by opening the front door of the dryer unit
Other Parts Used:
BELT DRIVE Idler Pulley Wheel
  • CLARENCE from ENGLEWOOD, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
19 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16729246
Manufacturer Part Number: WE03X32037
Brand
Model Number
Description
General Electric
DDP1370GAM
Dryer - Electric
General Electric
DDP1370SAM
Dryer - Electric
General Electric
DDP1370SBM
Dryer - Electric
General Electric
DDP1375GAM
Dryer - Electric
General Electric
DDP1375GBM
Dryer - Electric
General Electric
DDP1375GCM
Dryer - Electric
General Electric
DDP1375GDM
Dryer - Electric
General Electric
DDP1375GEM
Dryer - Electric
General Electric
DDP1375SAM
Dryer - Electric
General Electric
DDP1375SBM
Dryer - Electric
General Electric
DDP1380GAM
Dryer - Electric
General Electric
DDP1380GBM
Dryer - Electric
General Electric
DDP1380GCM
Dryer - Electric
General Electric
DDP1380GDM
Dryer - Electric
General Electric
DDP1380GFM
Dryer - Electric
General Electric
DDP1380SAM
Dryer - Electric
General Electric
DDP1380SBM
Dryer - Electric
General Electric
DDP1380SCM
Dryer - Electric
General Electric
DDP1380SDM
Dryer - Electric
General Electric
DDP1380TAM
Dryer - Electric
General Electric
DSKS433EA0AA
Dryer - Electric
General Electric
DSKS433EA0WW
Dryer - Electric
General Electric
DSKS433ET0
Dryer - Electric
General Electric
DSKS433EW0WH
Dryer - Electric
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
BELT DRIVE
$ 59.20
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.