Drum Bearing Slide - White WE1M504 | Official GE Part | Fast Shipping | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Drum Bearing Slide - White – Part Number: WE1M504
Drum Bearing Slide - White – Part Number: WE1M504 https://partselectcom.azureedge.net/Schematics/GE/00002276i02.gif

Drum Bearing Slide - White

129 Reviews
Your Price
$7.28

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS755842

Manufacturer Part Number WE1M504

Manufactured by GE

This is a drum bearing slide, also known as bearing drum slide, glide, or pad, that is fitted to a dryer. The slide supports the front drum as the drum rotates. Check both slides for signs of wear, because they often wear at the same rate, and should be replaced at the same time; there are 2 slides per dryer. The drum bearing slide may need to be replaced if the dryer is not tumbling, takes longer than usual to dry clothes, or is noisy during use. This is a white plastic part that is sourced directly from the manufacturer. Sold individually.

This part works with the following brands: General Electric, Hotpoint, Kenmore

This part works with the following products: Dryer, Washer Dryer Combo, Washer

This part fixes the following symptoms: Noisy | Marks left on clothes | Will not tumble | Takes too long to dry

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part Photo
Description
Price
Availability
(25)
Part Number: PS960316
This front drum bearing helps your dryer operate as quietly as possible. This is an OEM part and is sold individually. It is about 10 inches in height and 22 inches in width. It is made entirely out of plastic and is whi...
$26.19
In Stock
(16)
Part Number: PS6447706
The drum slides support the front of the dryer drum. As they start to break down it may cause your dryer to make noise or not dry clothes in the usual amount of time. You will need to purchase two for both sides of your ...
$4.74
In Stock

Questions & Answers

Most Helpful

Question:

I’m changing all the bearing slides on my dryer how many do I need and why are they different colors?

Brent
July 20, 2017
Answer:

Hi Brent, the bearing slides are different colors to tell the difference between them. If you are replacing the front bearing slides in your dryer you will need 2 lower slides WE1M504, which are white. You will also need two upper slides WE1M1067, which are green. Good luck with this repair.

23 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

Do I need 2 white slides and 2 Green slides for this dryer? If so do the slides come as a set or are they single? In other words when I order the white slide is it a set of 2 or just a single slide?

Glenn for model number DHDSR48EF2WW
October 2, 2017
Answer:

Hi Glenn. You will need to order 2 of the white slides and 2 of the green slides. They are sold individually . Hope this helps!

12 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

My dryer is making a terribly loud noise when I first turn it on. Is there a kit or something I should get for it? Ive been looking at your parts list and if I change the top drum bearing I think I will need the drum slide bearings. How many do I need and which ones should I order??? Are there any other parts I should order to stop the noise? Thanks for the help!

Nina
July 20, 2017
Answer:

Hi Nina, great question. Changing your front bearings would be your first step as worn ones can cause loud noises throughout the drying cycle. To change the upper bearings, you will need 2 of WE1M504 and 2 of WE1M1067. If you decide to also change the rear bearing which would be the second most common cause for the noise, the part would be WE25M40. Let us know if you have any further questions.

9 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

I bought and am currently replacing the rear bearings. Since the dryer is already pulled apart how can I tell if I should replace the front bearings or the support?

Calista
July 20, 2017
Answer:

Hello Calista, thanks for getting in touch. You will know to replace the front bearings or the support if you see any visible damage. Wear is normal, but if the parts are damaged in any way they should be replaced. I hope this helps!

6 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

While drying it is making a squeaking noise that is coming and going like it maybe the belt squeaking

Bobby for model number DBXR463GD1WW
August 15, 2017
Answer:

Hi Bobby, Thank you for your inquiry. Your belt could be the issue. If it has worn down so much that maybe it is slipping against the pulley. However it is more likely that you will have to replace either your bearing slides or your pulley. I would check all of these parts to see which one of them are causing your problem. They are all physical parts, so when you look at them you should be able to determine which one is causing the problem for you. The belt and the slides would be parts that get worn down, the pulley is just something that you turn the wheel on and you will hear if it is making the squeaking noise. Good luck with your repair.

5 people found this helpful.
Was this helpful?
Show Answer
Hide Answer

Most Recent

Question:

Dryer is about 16 months old. Had clothes in dryer and it quit running and it would not start back. What would be the problem with the dryer.

Agnes for model number HTDX100EM8WW
23 days ago
Answer:

Hello Agnes, Thank you for the question. I would recommend replacing or checking the Fuse, PartSelect Number PS10065161. If the fuse is blown, it will cut power tot he appliance. Hope this helps, good luck with this repair!

Related Parts: FUSE 3AB
Was this helpful?
Show Answer
Hide Answer
Question:

How many glide slips would come with this? The dryer needs four. Does this purchase buy me four?

Hansel
April 11, 2018
Answer:

Hi Hansel, Thank you for your question. These parts are sold individually. Be sure to check your model number and make sure that you need four of these ones and not two of these slides and two of a different kind. Good luck with your repair.

1 person found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

A question about dryer . Once in awhile durnh a drying cycle the dryer will make a squeaking noise.And sometimes the dryer will take a long time to dry but i found the front seal was broken and not fully there.

Juan
March 15, 2018
Answer:

Hi Juan, Thank you for your question. The squeaking noise you are hearing is likely a worn drum support roller that needs to be replaced. It is always recommended to replace both of them at the same time. If your dryer is taking a long time to dry and the front seal I would recommend replacing it as this is likely causing the issue. I hope this helps. Thank you and have a great day!

2 people found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

I ordered replacement slides and got 4 white slides. Can I use these or is there a specific reason for the Green slides?

Michael for model number DBVH512EF0WW
January 31, 2018
Answer:

Hi Michael, Thank you for the question. The appliance needs 2 of the white and 2 of the green in order to operate properly. Hope this helps!

1 person found this helpful.
Was this helpful?
Show Answer
Hide Answer
Question:

The dryer is not drying loads in normal time. It is also making a noise as if something is flopping around inside as the drum turns. There is nothing in the dryer and it still makes the noise. What should I check and in what order.Thanks, Jim

Jim for model number DBXR453ET5WW
December 5, 2017
Answer:

Hi Jim, Thank you for the question. You can check the belt to make sure it is not wore out and and preventing the drum to turn as it should.You can also check the Rear Drum Bearing for wear. Make sure the appliance is getting proper air flow. Clean the Lint Trap Duct Assembly and the Air Vents. You can use a Multi Meter to test the High Limit Thermostat and the Bias Thermostat as well for proper continuity. Hope this helps!

Was this helpful?
Show Answer
Hide Answer
Question:

My dryer makes a thumping noise when it is running.

Denny for model number GFDN120ED1WW
November 1, 2017
Answer:

Hi Denny, Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the drive belt, the idler pulley wheel, the complete duct trap assembly, the idler arm, the bearing retainer and the bearing slides. I hope this helps. Thank you and have a great day!

1 person found this helpful.
Was this helpful?
Show Answer
Hide Answer

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 179 reviews What's this?
1-15 of 179
702 of 790 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Customer:
Matthew from Plainfield, IL
Due to over loading of the dryer the drum ruined the slides and was making a bad noise due to plastic rubbing plastic
It was pretty easy. After already taking apart the dryer to install a new belt I knew exactly my plan of action. I removed the two screws that hold the top panel of the dryer to the front panel. I then removed the top panel and removed the screws that hold the front to each side panel. I than pulled the front away from the cabinet and drum. I put the new slides in place and installed a new felt strip. I put it back together and that was that. Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

634 of 713 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Customer:
Daniel from Chicago, IL
Dryer was squeeling when running.
I removed the two screws at the front above the drum opening (with the dryer door open). The top panel then lifts off. I removed the screw at each side that holds the front panel to the side panels, tilted the front panel forward, which disengages the front of the drum from the front drum glide bearing. I then lifted the front panel slightly, unhooking the bottom of the panel from the dryer base, and swung the front panel aside. I removed the existing top drum bearing guide, which was disintegrated, and snapped in the new bearing guide, with the nylon slide strips installed in the bearing guide. Next pulled out the old felt strip, and pressed the new one in place. I then put the bottom of the front panel back into the bottom of the dryer front, and while lifting the drum to asure it fit over the bearing guide, pushed the front panel back to a vertical position to mate with the side panels. I then replaced the side panel screws, replaced the top, and replaced the front top panel screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

580 of 722 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Customer:
Mark from Addison, IL
Intermittant squeaking noise
Basically, I followed the same steps a prior person posted.
1.Removed the two screws inside the door, on the top part of the opening.
2.Lifted up and removed the top.
3.Removed two screws holding the front panel in place.
4.Held up the drum while removing the front panel. I carefully turned the panel so I could get at the drum bearing without pulling the wires connecting it to the front panel. The wires are not very long, so I had to be careful not to pull on them.
5.Carefully pried off the old drum bearing, using just my hands. It was fairly tight, and popped out just as I started to worry if I was putting too much pressure on it.
6.Checked to see how the old felt was installed, then I pulled out the old felt.
7.Inserted the new felt, being careful to insert one end into a slot the same way the original was installed.
8.Inserted the new slides into the new drum bearing. The gray slides went in at the eleven and one o'clock positions, the white slides went in at ten and two o'clock.
9.Removed a surplus plastic piece from the new drum bearing (where the light comes through).
10.Inserted the new drum bearing, putting the bottom tabs in first, then pivoting it into place. I squeezed it into place to make sure it was tight.
11.Lifted up the drum and put the front panel back on.
12.Screwed the front panel back on, using the two screws.
13.Carefully put the top back on.
14.Screwed in the two screws inside the front door to fasten down the top.
That was it! I started up the dryer and it worked fine. No more squeaking.
About the only thing odd about the repair is why PartSelect sells each slide separately (i.e., I had to order 2 white slides and 2 gray slides). I can't imagine replacing just one, so why not package them in pairs, or maybe even all four in one package.
At any rate, the repair was easy, and a lot cheaper than having someone come out to fix it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

233 of 320 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Customer:
Bruce from Springfield, MA
Loud - screeching noise during drying cycle, in all modes of operation.
1. Removed top cap on lid by removing the 3 - phillips screws.
2. removed front digital display panel from PC board.
3. removed bolts with nut-driver on the top of the front panel, removed bottom screws with #2 square bit.
4. removed "snap-in" plastic top bearing ( paying attention to where wiring is routed within this frame.
5. cleaned all areas of plastic and felt debris, installed new bearing, felt, and glides.
6. Re-installed all wiring and panels.

*** make sure to order all of the glides, there should be a total of 4 for the top assembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

245 of 384 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Customer:
Brian from Langhorne, PA
Dryer made loud screaching constant sound
(1) open dryer door (2) remove screws holding door on and put door aside. Probably doesn't have to be done but I think its easier and safer so you don't accidently bend the hinges. (3) remove 2 screws holding top onto front. of dryer located in recess that door sits in (3) pull up on top and remove (from slots by the control panel) (4) remove final 2 screws holding front onto frame of dryer. You can disconnect the connectors from the front panel back to the dryer to make the job easier or work with it without disconnecting. I'd take your time and clean any lint dust, etc. (5) the Drum Bearing removes fairly easy as it is just snapped into 2 slots. insert slids into slots.... make sure you order all 4. Mine were all beat!. (6) replace with new Drum Bearing. (7) I did the lower felt seal as well. Pay attention to how you took the old one off and replace the same way. Remember it stretches to fit into the slots. Put all back together. Remember to front panel has to sit correctly into bottom slots before you screw the top screws back in. All in all.... a simple project, and no more noise!!!!! Great to have websites like this. Easy ordering, quick shipping, great diagrams.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

155 of 230 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Customer:
Markus from Austin, TX
Clothes having black marks and getting stuck on top of drum, tearing
Repair was easy, following the disassembly instructions from the video on your site. What I did not know is that it takes 2 pieces of plastic slides from each kind to replace (makes a total of 4). I was lucky in that one of the white ones was still okay and that I accidentally ordered a second one from the greenish kind, so I was set. This was also a great opportunity to clean out the dryer which must have been a bucket full of lint. So far no more complaints. Given that this problem seems to reappear once in a while I'll order a new set soon.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

86 of 89 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Customer:
Deborah from Glenburn, ME
My clothes were being "bitten", discolored with blackish smudges, and buttons eaten off clothing
First I really had to hunt for the proper way to get my dryer drum accessible for the repair. With my model it was as simple as removing two screws to take off the top panel (located by opening the dryer door), and then removing two other screws inside the front panel at the top. The front will then be able to swing to the left side (the door switch wires are on this side for this model). Simply remove the drum bearing by gently pulling it off. My slides were in such poor shape for less than 4 years old!! One of them had completely disintegrated! These slides have a small whole on one end which attaches to a small nub at the edge of a slot while the other side just slid into a slot at the other end. No need to even take out the drum!!
The hardest part of the job was to get into the dryer!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

67 of 106 people found these instructions helpful
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Customer:
Gene from Kutztown, PA
Dryer would squeal when first starting and then gradually became very noisey.
The repair was done as follows:

1. Removed the door
2. Removed the two screws securing the top panel then removed the panel.
3. Removed the two screws securing the front panel then removed the panel.
4. Removed the screws securing the left side panel then removed side panel and the two leveling feet.
5. Tipped dryer over on its back (you will want to protect your floor, the four screws that attach the heater unit protrude through the back).
6. Disengaged the belt tensioner and removed the belt and the drum.
7. Removed the three Torx screws securing the drum bearing to the drum and discarded old bearing.
8. Removed the four screws securing the bearing retainer to the heater unit.
9. Removed the four screws securing the heater unit and two sensor wires.
10. Lifted heater unit just high enough to remove bearing retainer. Discarded bearing retainer.

The new drum bearing kit is supplied with self tapping screws. I installed the screws into the bearing parts to tap the holes and then removed them prior to assembly.

11. Installed new bearing retainer to back of heater unit using the supplied screws. Install the four screws by hand, finger tight.
12. Re-attached heater unit and tighten screws.
13. Re-attached sensor wires.
14. Tightened the four bearing retainer screws.
15. Attached new drum bearing to drum using the three supplied Torx screws. I used tape to hold everything together while installing the screws.
Tightened the Torxscrews.

Next I used a vacuum to remove all the lint from inside the dryer. I also used a small plastic putty knife to remove the caked on lint on the impeller blades.

16. Inserted drum bearing into bearing retainer.
17. Installed drum belt and belt tensioner.
18. Installed left side panel and feet.
19. Replaced the two grey and two white slide bearings on the front panel. They just slip onto a small post and slide into a slot.
20. Installed front panel. (Rotate drum to help with installation)
21. Installed top panel and door

PROBLEM SOLVED!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

48 of 54 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Customer:
warren from Flint, MI
Squeaky dryer for a week or two
First I unplugged the dryer and turned off the gas

Second I opened the door and unscrewed the two screws that go up into the top panel and hold it in place (you will need to get down and look under the top of the door jam to see the screws).

Third I lifted the front of the top enough to remove the two screws holding the front panel on (Use a magnetic screwdriver if you have one you do not want to lose the screws taking them out or putting them back in)

Fourth positioned a chair to lean front panel against so it would not fall over or strain the electrical wires that run to the switch in the door (slide the front panel off slowly supporting the drum with your hand so it doe not drop hard on the motor wires or burners)

Sixth determined the parts I needed and ordered parts from pars select and got them in two days

Seventh when new parts arrived I unclipped the old DRUM BEARING removed the felt gasket, put the felt in the new Drum bearing and clipped it in place

Eighth clipped in the 2 new Dryer Drum Slides and 2new SLIDE WH slides

Ninth Vacuumed out dryer and vent pipe completely

Tenth reassembled dryer being careful to make sure drum was properly aligned as I put the front panel in place and the belt was in the proper place on drum and all the screws were back in place.

Ninth turned gas back on and plugged in dryer

Ten turned on dryer to test squeak was gone

Hints as soon as you hear a squeak look into it and you will probably not have to replace the DRUM BEARING. But if any of the Slides are bad replace them all. Check your belt and felt gaskets to see if they are in good shape. If everything up front is in good shape and it is not the motor squeaking it could be the back drum bearing. Take your time keep your old dryer running for a few more years and save the $40 dollar service call. Do not forget to clean out all the old lint and dust out of your dryer and vent pipes not only will you reduce the risk of fire you will be allowing air to pass through the dryer more easily drying your clothes in shorter time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

38 of 41 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Customer:
Tracy from Winston Salem, NC
Dryer was making a lot of noise while running
I ordered parts based off other peoples findings. I took the top and front off the dryer. I found the drum bearing(really only a plastic bracket. The slide were completely worn and the drum was wearing into the plastic drum bearing. I popped the old drum bearing out and put the new on in. There are actually 2 sets of slides (4 total). I only bought 2. I reused two of the existing slides. I put the unit back together and it was a lot quieter. I need to order more of the slides. They are only a couple dollars a piece and take most of the beating. I should've but didn't get the pasking or gasket. It was broken. I think it'll be fine though.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

34 of 41 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Customer:
Bruno from Somerdale, NJ
Noisy and took too long to dry clothes
Easy repair. Removed top of dryer and removed two screws to front panel and door assembly. Old front air duct assembly was worn and broken, so it literally fell off the panel. I cleaned the front panel and door assembly of all the lint and dirt, and snapped the new parts into place. The new parts came with the gasket and felt drum seal already installed, to all that had to be done was to snap it into place. Installing the drum slides was a breeze. I simply had to slide one end in the slot, position the hole over the pin, and slide the other end in. I put everything back together, and ran a full cycle for test. Dryer works like new, and run quiet.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

38 of 54 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Customer:
William from Sewell, NJ
Noise at drum
1 Unplug power cord. 2 Remove top and front panels. 3 Remove old bearing, slides and bulb. 4 Install new bearing slides and bulb. Reinstall front and top panels. 5 Restore power and test. Time to repair 25 minutes. Very satisfied with the parts and the time to receive them, very good parts service. Will definately use this service in the future and will highly recommend this company.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

44 of 73 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Customer:
William from Blue Springs, MO
Noise from the drum in the dryer
The weight of the front section of the drum in the dryer rides on 4 slim pieces of plastic. remove the screws that hold down the top of the dryer are in the front door at the top at each corner. remove the top, then remove 2 screws that hold down the front of the control panel to the cabinet at the base. remove the 2 screws at the of the front corners of the cabinet to separate the front door section from the rest of the dryer.Watch out for the wires the connect the door to the rest of the dryer. if you replace the bearing at the back of the dryer you need to take two screws out at the base of the cabinet one from each corner to let the sides of the cabinet to spread out and let the drum pass though the front of the dryer cabinet. the belt has to come off the motor by lifting it up an sticking your hand in under the drum and working it off the end of the motor. replaced the parts ad the dryer works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

34 of 53 people found these instructions helpful
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Customer:
Michael from Sioux City, IA
The dryer began squeeking very loudly progressively getting worse
A very easy fix. Opening the front door to the dryer locate two chrome phillips head screws in the upper part of the door opening which hold on the top of the dryer. (I think in the older dryers the top simply was held on with keepers and you could simply pry it off. Not the case here)Lifting up on the front of the top it comes away from the back control panel. I would recommed that the control panel be removed as it is necessary to remove it to put the dryer top back on due to three clips that wont allow you to put the top back down with the control panel in place. It takes a star wrence to remove it. Once the top is off ther are two phillips screws holding the front of the dryer on (one on each side) remove them and the whole fron lifts up and off. The drum rides on a plastic schroud attached to the dryer inside front. Mine was so worn it required the purchase of the entire assembly which comes in two parts. The upper part had worn away so badly the drum was riding on the metal causing the noise. I ordered both the upper and lower assembly and both just simply snap off and the new ones snap right back on. No tools. I was a bit dissapointed as I assumed that the felt which is located in the lower assembly would come with the new part however it did not nor did some plastic tabs which the drum rides on in the upper assembly comes with the replacement part. It takes four of those tabs so order appropriately. Went back together easily and the whole job was done in about 40 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31 of 44 people found these instructions helpful
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Customer:
Joe from Eureka, CA
The dryer was making noise.
I removed the two screws that hold the front panel to the top panel. I removed two more screws that hold the front panel to the side panels. I separated the front panel from the side panels and removed the drum.

I could see on the front panel the drum slides were badly worn. One was gone.

The new parts installed easily using no tools at all. Everything snaps in place. The new foam gaskets press and stick to seal the duct work. The felt strip pressed into place.

I replace all the panels in reverse order and plug it in. It operates fine, but the motor is making the noise. I will look into replacing the motor next.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 179
Customer Reviews
Average Rating:
129 Reviews
4.9
out of 5
Filter By Rating:
  • 5 Stars
    118
  • 4 Stars
    10
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Sort by:

Model Cross Reference

This part works with the following models:

PartSelect Number: PS755842
Manufacturer Part Number: WE1M504
Brand
Model Number
Description
Kenmore
2661532110
Washer Dryer Combo - LAUNDRY CENTER
General Electric
2661532211
Kenmore
2661532212
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2661532311
Washer Dryer Combo - LAUNDRY CENTER (ELECTRIC)
Kenmore
2661532312
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
2661532412
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
26715321
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532110
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
2671532211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532212
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532311
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532312
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532412
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361532110
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361532412
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
36361542
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542310
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542410
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371532110
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542310
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542410
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
363DDE8509RCMAA
Dryer
Kenmore
363DDE8509RCMWW
Dryer
Kenmore
363DDE9600RCMAA
Dryer
General Electric
61140418
Dryer
General Electric
61140419
Dryer
General Electric
61148418
Dryer